Specifications are limited by the circuit and resistance value.
Please contact us separately.
3 digits
●
Resistor Networks：RNX, RTX, RTY
RNX
Circuit
Code
RNX: Custom Resistor Network
RTX,RTY: SOT-23 Resistor network
●
Resistor Networks：RDA, RDB
RDA
Circuit
Code
RDA: Dual terminator network
RDB: Differential terminator network
Example
Q20
Package
Symbol
Package type symbol＋
Number of pins
Example
T
Terminal
Surface Material
T :Sn
TE
Taping
TE: Plastic
embossed
5001
Custom
Code
Q20
Package
Symbol
Same as above
(Except Q24, N14, N08)
T
Terminal
Surface Material
T:Sn
TE
Taping
TE: Plastic
embossed
471J
Nominal Resistance
& Tolerance of R1
3 digits G: ±2%
J : ±5%
511J
H
Contact us when you have control request for environmental hazardous material other than the substance specified by EU-RoHS.
Nominal Resistance
T.C.R.
& Tolerance of R2 （×10
−6
/K）
3 digits G: ±2%
E :±25
J : ±5%
C:±50
H:±100
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
Contact our sales representatives before you use our products for applications including automotives, medical equipment and aerospace equipment.
Malfunction or failure of the products in such applications may cause loss of human life or serious damage.
Oct. 2020
www.koaglobal.com
■Ratings
Package
Package Symbol
Package Power Rating
Resistance Range
Max. Working Voltage
Rated Voltage
Rated Ambient Temp.
Operating Temp. Range
10Ω〜1kΩ
1.1kΩ〜
Q16
0.8W
QSOP
Q20
1.0W
Q24
1.0W
N08
0.4W
SOIC
N14
0.6W
N16
0.8W
SOT-23
S03
0.2W
Power Rating 200mW/Resistor Element
※1
Power Rating 50mW/Resistor Element
※1
100V
√￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣
Rated Power×Nominal Resistance Value, Rated Voltage should not exceed Max. Working Voltage.
＋70℃
−55℃〜＋125℃
※2
Above ratings are based on the thermal resistances using a multi-layer circuit board (EIA/JESD51). For mounting on a mono-layer board, power derating shall be needed. Please inquire of us about
conditions.
※1 Total power consumption of all elements should not exceed the package power rating.
※2 About operating temperature range −55℃〜＋155℃, We can provide as custom devices. Please inquire of us about it.
●Standard Resistor Networks
Circuit
Code
Circuit Schematics
（Top View）
Pin n
Number
of Pins
T.C.R.
（×10
−6
/K）
E:±25
C:±50
H:±100
Resistance Range
（Ω）
E24
and Absolute Tolerance
F:±1%
G:±2%, J:±5%
100〜100k 100〜100k
51〜100k
30〜100k
n/2
51〜100k
10〜100k
Circuit
Code
Circuit Schematics
（Top View）
Pin n
R1
Number
of Pins
T.C.R.
（×10
−6
/K）
E:±25
Resistance Range(Ω) (E24)
and Resistance Tolerance
G:±2%, J :±5%
Network Resistors
Pin n
RBA
R
8, 14, 16
R
20, 24
n/2
Number of Pins : n=8,16,20,24
RDA
R2
-
R1
R2
-
16, 20
C:±50
H:±100
Pin n
R1
Pin 1
Pin n
R
Pin n
Pin 1
Pin 1
n/2
R1=
150〜10k
R1: R2=
1:1〜1: 4
Pin n
Pin
:
Number of Pins
n
n=8,16,20,24
E:±25
n
100〜100k
Pin
100〜100k
R
Pin n
R1
R2
E:±25
C:±50
H:±100
RBB
R
Pin 1
n/2
Pin
8, 14, 16
20, 24
C
R
n
C:±50
R1
R
R2
R1
Pin 1
51〜100k
30〜100k
n/2
51〜100k
10〜100k
100〜40k
2R
n/2
RDB
Pin 1
R1
Pin 1
n/2
16, 20
R2
R1
Pin
Number
1
Pins
R
2
1
n/2
: n=8,16,20,24
R
of
H:±100
E:±25
C:±50
Pin 1
R1=
150〜10k
R1: R2=
1:1〜1: 4
Pin 1
Number of Pins : n=3,SOT-23 Only
Pin 1
100〜40k
Pin n
R
R
Pin n
RTX
n/2
Pin n
R
1
R
2
R
2R
2R
R
R
2
3
SOT-23
Only
2R
2R
Number of Pins : n=8,16,20,24
RLA
R
2R
2R
R
2R
2R
n/2
14, 16
H:±100
1k〜30k
H:±100
2R
51〜40k
2R
51〜40k
2R
Pin 1
Pin 1
n/2
ber of Pins : n=8,16,20
Number of Pins : n=3,SOT-23 Only
Pin 1
n/2
■Performance
Test Items
Resistance
T.C.R.
Resistance to soldering heat
Rapid change of temperature
Moisture resistance
Endurance at 70℃
High temperature exposure
Performance Requirements
ΔR±
（％＋0.05Ω）
Limit
Typical
25℃
＋25℃/−55℃, ＋25℃/125℃
260℃±5℃, 10s±1s
−55℃
（30min.）
/＋125℃
（30min.）, 100 cycles
40℃±2℃, 90〜95%RH, 1000h
1.5h ON/0.5 h OFF cycle
70℃±2℃, 1000 h
1.5 h ON/0.5 h OFF cycle
＋125℃, 1000 h
Within specified tolerance
Within specified T.C.R.
0.1
※3
0.5
※3
Test Methods
0.05
0.05
0.05
0.05
0.10
0.5
※3
0.25
※3
0.25
※3
※3 Guaranteed value differs depending on resistance value.
■Precautions for Use
・
he resistor of this product is formed by narrow patterning a thin metal film. Thus, application of excessive voltage causes burn and destruction of the resistive
T
film, abnormality in resistance or open resistance and loss of proper function. The properly and electrostatically measured taping materials are used for the
components, but attention should be paid to the fact that there is some danger the parts may be destructed by static electricity(equivalent to 500V and more at
100pF, 1.5kΩ) to cause a change in resistance in the conditions of an excessive dryness when mounting on the boards. Similarly, care should be given not to apply
the excessive static electricity at the time of mounting on the boards. When designing, consideration can be taken into withstanding ESD for customized KPC
products. Please consult with us about the details.
・Hand
soldering by iron soldering or repairment are not recommended because KPC is a multi-pin product.
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
Contact our sales representatives before you use our products for applications including automotives, medical equipment and aerospace equipment.
Malfunction or failure of the products in such applications may cause loss of human life or serious damage.
Oct. 2020
www.koaglobal.com
NETWORKS
EU
RoHS
KPC RIA
KPC RNX
Isolated Resistor Networks
Custom Resistor Networks
■Applications
・
utomotives, medical instrument, industrial machines, Measurement equipment
A
・
omputers and networks
C
・
igh precision OP amp circuit, High precision voltage divider
H
■Features
・
High precision resistor networks
Combination of different resistance is available for custom circuit.
[i=s]This post was last edited by damiaa on 2020-7-30 10:56[/i]Rongpai Semiconductor
It seems the price is very good. X Baoshang Rongpai 2Pai_π120/π121/π122 digital isolation chip series is priced as ...
Below is a hierarchical project composed of two files.
File 1 is the top-level file. counter.v
module counter(clk,led,led1,led2,led3);input clk;output led;output reg led1,led2,led3;wire clko;wire rest...
In this step, the eight .out files can be combined into one file for network transmission through the tool, and then sent to the 6678EVM for running.1. Execute the EMACboot_8core.sh script on the AM57...
Comments are rewarded | [Discovery] Enter the world of TI millimeter-wave radar and quickly acquire design skillsClick here to enter the eventEvent time: From now on to November 26, 2019Event process:...
Understand the characteristics of different probes: • Passive probe: general purpose. Used in high voltage environments. Measure small signals. Usually cheaper. Desktop oscilloscopes with bandwidths ...[Details]
With the advancement of 5G commercialization, crystal oscillators, as an indispensable component of electronic products, have ushered in a period of rapid growth. They have key applications in base s...[Details]
I majored in software engineering, and I learned MCU purely out of interest. I was tired of the emptiness of writing pure software, which could only display a sentence "hello, world!" on the screen, ...[Details]
First of all, of course, you need to configure the environment on your computer ========= SecureCRT (This is connected via the serial port, which is equivalent to a serial port debugging tool. We ...[Details]
The serial port is a commonly used data transmission interface. The STM32F103 series microcontroller has a total of 5 serial ports, of which 1-3 are universal synchronous/asynchronous serial interfac...[Details]
FB 467 FB_Motor_AMX_VR+FB 364 FB_SEW_AMX_VR
FB 467 FB_Motor_AMX_VR
The module is used to control motors (turntable motors, centering motors, etc.) and FB_SEW_AMX_VR of FU drives (Mo...[Details]
Mobileye was rated "Autonomous Driving Leader" by two major industry research organizations In recent competitiveness assessments of autonomous driving suppliers conducted by well-known research in...[Details]
S3C2440A contains an LCD driver controller. It can automatically generate the control signals required for LCD driver control. Therefore, S3C2440A can directly interface with LCD screens such as blac...[Details]
Xpeng to become first Chinese automotive company to use Connext DDS in mass-produced vehicles RTI, a leading provider of connectivity solutions for the Industrial Internet of Things (IIoT), today ...[Details]
Introduction
Modern high-speed operational amplifiers (op amps) have settling times of a few nanoseconds. This time is so short that measuring it within a reasonable error range is not only a...[Details]
1. Is the microcontroller difficult?
If you ask a MCU expert, he will definitely tell you that MCU is actually very simple; if you ask a novice the same question, his answer is only one word "diffi...[Details]
This year, OPPO began to gradually improve its own ecosystem and launched the first product of the loT ecological strategy, OPPO Watch. This is also the industry's first smartwatch with a 3D hyperbol...[Details]
In the development and application of transmitters, it is often encountered that the output of the required transmitter is different from the output of the existing transmitter, or the output of the u...[Details]
Silicon wafer resistivity tester TS1700 Silicon wafer resistivity tester TS1700 power output/measurement: built-in DC stabilized power supply and precision current measurement unit, with a measure...[Details]
STMicroelectronics (ST) has been deeply involved in the automotive market for more than 30 years, and its products and solutions cover most application systems in ordinary vehicles. With the develo...[Details]
FPGA/CPLD
京公网安备 11010802033920号
EEWORLD
