-
Abstract: This article introduces the design structure of a high-speed A/D system with a sampling rate of 500 megabits/second and a sampling accuracy of 8 bits, as well as problems in high-speed...[Details]
-
As I'm thinking about how to use 50Ω, I might want to make my own probe inputs for some of my oscilloscope modules for general probing, rather than connecting directly to a 50Ω source. I haven't buil...[Details]
-
The program code is as follows:
#include avr/io.h
#include util/delay.h
int main(void)
{
DDRA=0XFF;
PORTA=0XFF;
DDRD=0X00;
PORTD=0XFF;
while(1)
{
if(PIND== 0XFE)...[Details]
-
T=(TIM_Period+1)*(TIM_Prescaler+1)/TIMxCLK Among them, TIMxCLK is its clock frequency. If the crystal oscillator is 8MHz, it is generally 72MHz. ...[Details]
-
On November 24, according to the data analysis of the domestic foldable screen mobile phone market by Daily Interactive Personal Big Data, the foldable screen mobile phone market is growing rapidly, ...[Details]
-
The most direct reason why the PLC is connected to a 220V relay is that the PLC output is AC 220V. Why is it AC 220V?
If the digital output module is a relay output type! If the common t...[Details]
-
Smart IOPS, a leading high-performance storage solutions provider, announced that it has signed an Asia Pacific distribution agreement with EDOM Technology (TWSE: 3048). EDOM Technology is Asia's bes...[Details]
-
/*------------------------------------------------------------------*/ /* --- STC MCU Limited ---------------------------------------------*/ /* --- STC12C5Axx Series MCU A/D Conversion Demo --------...[Details]
-
The word "tube" refers to the electron tube. The tube amplifier that everyone often talks about refers to the amplifier that uses the electron tube. Some electron tubes are used for amplification, ...[Details]
-
The bridge rectifier circuit is shown in Figure Z0705, where Figures (a), (b), and (c) are three different ways of drawing it.
It consists of a power transformer, four rectifier diodes D1~4, ...[Details]
-
1. The screws of the speaker are not tightened and are loose, resulting in the inverted phase tube not being properly processed. If the speaker plays too loudly, mechanical noise will be generated....[Details]
-
At present,
the rapid
development
of
digital
home appliance
technology
has made the corresponding
electronic
circuit speed increasingly faster, and
the requirement...[Details]
-
Driven by global warming and rising energy prices, the market demand for intelligent, radio-controlled devices that can be used to monitor, control, communicate and automate the delivery of energy and...[Details]
-
ROCHESTER, Minn. — Providing telerehabilitation services to patients with advanced cancer can improve their physical function, pain levels and quality of life, while also reducing the length of time ...[Details]
-
There are many things to learn about ARM, and interrupts are definitely something that needs to be learned. Since the CPU introduced interrupts, we have truly entered the multi-tasking system and g...[Details]