Pb in high temperature solder (exempt per RoHS 2002/95/EC Annex (7))
Obsolete/End of Life Date: 12/31/2014 – Last Time Buy Date: March 31,2015
ABSM2
RoHS/RoHS II Compliant
12.5 x 4.6 x 3.7mm
| | | | | | | | | | | | |
| |
Please consider ABSM3A as an alternative
FEATURES:
• Suitable for RoHS compliant reflow
• Available tight tolerance and
temperature stability
STANDARD SPECIFICATIONS:
Parameters
Available Frequencies
Operation Mode
Operating Temperature
Storage Temperature
Frequency Tolerance @+25°C
Frequency Stability over the Operating
Temperature ( ref. to +25°C)
Equivalent series resistance (R1)
Shunt capacitance (C0)
Load capacitance (CL)
Drive Level
Aging
Insulation Resistance
Table 1. Standard ESR
Frequency (MHz)
3.50 - 3.999
4.000 - 5.999
6.000 - 11.999
12.000 - 32.000 (fund)
30.000 - 35.999 (3rd overtone)
33.000 - 70.000 (3rd overtone)
ESR (Ω)
max.
200
150
100
50
100
80
APPLICATIONS:
• Computers, Modems, Microprocessors
• Communication, Test equipment
• PCMCIA
Units
MHz
-----
-----
-----
ºC
ºC
ppm
ppm
Ω
pF
pF
µW
ppm
MΩ
Notes
3.50 MHz - 30.000 MHz
30.001 MHz - 70.000 MHz
30.001 MHz - 32.000 MHz
Minimum
Typical
Maximum
See Table 2 below
Fundamental:
Standard
3rd Overtone:
Standard
Fundamental:
Option.
See options below
-10
-----
+60
-55
-----
+125
-50
-----
+50
-50
-----
-----
-----
-5
500
Table 2
See options
See options
See options
-----
See table 1 below
-----
18.0
-----
-----
-----
+50
7.0
-----
100
+5
-----
Standard
(See options if
other than STD)
@25°C±3°C
First year
@ 100Vdc ± 15V
Available Frequency List [MHz]
3.579545
3.686400
3.932160
4.000000
4.032000
4.096000
4.194304
4.433619
4.800000
4.915200
5.000000
5.068800
5.120000
5.333333
5.529600
6.000000
6.144000
6.176000
6.400000
7.159090
7.372800
7.680000
8.000000
8.000156
8.192000
9.216000
9.600000
9.830400
10.000000
10.240000
10.240000
11.000000
11.059200
11.289600
12.000000
12.288000
12.352000
12.500000
13.000000
13.500000
14.318180
15.000000
15.360000
16.000000
16.000312
16.257000
16.384000
16.666000
16.667000
16.934400
16.934400
17.734475
18.000000
18.432000
18.869600
19.440000
19.660800
20.000000
20.480000
22.118400
24.000000
24.000140
24.576000
24.704000
25.000000
25.175000
27.000000
28.000000
28.322000
28.636360
29.491200
29.500000
30.000000
32.000000
32.768000
33.000000
33.333000
33.333300
33.868800
34.000000
35.468950
36.000000
40.000000
40.960000
44.000000
45.000000
47.940000
48.000000
48.000000
49.152000
50.000000
53.125000
55.000000
60.000000
64.000000
66.000000
66.666600
9.830000
14.745600 19.200000
(Left blank if standard)
OPTIONS & PART IDENTIFICATION:
ABSM2 -
Frequency in MHz*
Please specify the
frequency in MHz.
e.g. 16.000MHz
Load Capacitance (pF)*
Please specify CL (min
10pF) in pF or S for series
Custom ESR if other
than standard
R□
□:
Specify a value in
Ω
(e.g.: R40)
Operating Temp. *
E: 0°C to +70°C
B: -20°C to +70°C
C: -30°C to +70°C
N: -30°C to +85°C
D: -40°C to +85°C
Freq. Tolerance*
4: ± 30 ppm
MHz -
-
-
-
-
Packaging
Blank: Bulk
T: 1000pcs/reel
Oscillation Mode
F: Fundamental AT for
30MHz<F<32MHz
Freq. Stability*
Y: ± 30 ppm
H: ± 35 ppm
Z: ± 100 ppm
R: ± 150 ppm
*Frequency, Load Capacitance, Frequency
tolerance and stability is subject to availability.
Please contact Abracon for each option for
availability.
ABRACON IS
ISO9001:2008
CERTIFIED
CE RTIFIED
LLC
2 Faraday, Suite# B
|
Irvine
|
CA 92618
Revised:10.12.15
Ph. 949.546.8000
|
Fax. 949.546.8001
Visit
www.abracon.com
for Terms and Conditions of Sale
MOLDED PLASTIC SMD MICROPROCESSOR CRYSTAL
ABSM2
OUTLINE DRAWING:
Pb in high temperature solder (exempt per RoHS 2002/95/EC Annex (7))
RoHS/RoHS II Compliant
12.5 x 4.6 x 3.7mm
| | | | | | | | | | | | |
| |
Dimensions: Inches (mm)
TAPE & REEL:
T=Tape and reel (1000pcs/reel)
REFLOW PROFILE:
Dimensions: mm
ATTENTION:
Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated,
Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application
requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme
operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information.
At this time, the integrated chip is powered on (5V). If I connect pin 5 (input) to pin 10 (output) of another set of NOT gates, what voltage will it be? I tested it and found that the voltage is 2.7V...
CC2530 ZSTACK protocol stack coordinator controls the display content of multiple terminal LCD screens at the same time, one-to-one communication, temperature, humidity, smoke, photosensitivity, human...
Absolute encoders rely on the dense etching density of "photolithography" to etch very dense channels in both the diameter direction and the "circumferential direction".
With the above skills, two maj...
In order to realize an icon application system on the AT32F403A development board, I thought of a previous project, which was realized by GD32450I, so I planned to transplant it directly to the AT32F4...
[i=s]This post was last edited by Hot Ximixiu on 2021-5-9 23:00[/i]The following sharing is
The bug comes from a mature product of the company. It has been produced for about 6 years. Recently, we hav...
Original article by Mr. Gaosu | Huang GangNyears of valuable experience tells us that when encountering via stubs, the best way is to route the components on the surface layer to the lower layer, and ...
News about Xiaomi's new Surge chip has begun to leak out. The chip in the leak is not the previous Surge P1, Surge C1 and other imaging and charging chips, but a product that can replace Qualcomm S...[Details]
Affected by the aggravation of the chip shortage, as of July, automobile production and sales have declined for three consecutive months year-on-year. However, for domestic brands, the past seven mon...[Details]
In the past few years, we’ve seen a surge in the popularity of wearables across all market segments. It’s not hard to understand why: these products incorporate some of the latest technologies to i...[Details]
Switching mode power supplies are used to convert one voltage to another. The efficiency of this type of power supply is usually very high, so in many applications, it replaces linear regulators.
...[Details]
(1) Check whether the filament is normal or not. You can use the multimeter Rx1 to check whether the filament is normal or not. Connect the red and black test leads to the two pins of the filament ...[Details]
1 Background
This article uses permanent magnet synchronous motor to introduce its control method. The structure of permanent magnet synchronous motor is: the rotor is permanent magnet and t...[Details]
In July, Huawei Inside's first luxury smart pure electric sedan, the Alpha S·HI version of the Alpha, officially started mass delivery at the Blue Valley Magna high-end intelligent manufacturing base...[Details]
Today, ZTE Mobile announced that the ZTE Axon 40 series endorsed by Wu Jing will be launched soon. ZTE also announced that the ZTE Axon 40 series is the exclusive official designated phone for X...[Details]
The electronics industry's relentless pursuit of speed and performance is changing the standard for high-end oscilloscopes. While bandwidth was once the "key specification" that customers and vendors...[Details]
The final results of the "OFweek Robot Awards 2022" jointly organized by OFweek, a Chinese high-tech industry portal, and its authoritative
robot
professional media - OFweek Robotics, were ...[Details]
/******************************************* * This section of the experiment requires a deeper understanding of latches, bit select lines, * Segment selection lines, etc., and methods to prevent...[Details]
1
Application scenarios are becoming more diversified
At this Asian Games, Chinese robots are "blooming everywhere" and are widely used in various fields. Among them, the applicat...[Details]
Today, FinTech is deeply embedded in every financial service business. Without FinTech, financial service companies such as banks or insurance companies would find it difficult to operate. At the sam...[Details]
LiDAR and competing sensor technologies (camera, radar, and ultrasonic) intensify the need for sensor fusion and the need for careful selection of photodetectors, light sources, and MEMS galvanometer...[Details]
The intelligent compact shelving control system is a highly automated storage device, which is widely used in libraries, archives, warehouses and other places. It realizes intelligent control and m...[Details]
Analog electronics
京公网安备 11010802033920号
EEWORLD
