Y172574R1000D0L datasheet, PDF

Datasheet> All Categories > Passive components> The resistor> Y172574R1000D0L

Y172574R1000D0L: DescriptionFixed Resistor, Metal Foil, 0.75W, 74.1ohm, 350V, 0.5% +/-Tol, -2,2ppm/Cel,; CategoryPassive components The resistor; File Size451KB，6 Pages; ManufacturerVishay; Websitehttp://www.vishay.com

Download Datasheet Parametric View All

Y172574R1000D0L Overview

Fixed Resistor, Metal Foil, 0.75W, 74.1ohm, 350V, 0.5% +/-Tol, -2,2ppm/Cel,

Y172574R1000D0L Parametric

Parameter Name	Attribute value
Is it Rohs certified?	incompatible
Objectid	851362840
Reach Compliance Code	compliant
ECCN code	EAR99
structure	Hermetically Sealed
Lead diameter	0.64 mm
Lead length	25.4 mm
Number of terminals	4
Maximum operating temperature	125 °C
Minimum operating temperature	-55 °C
Package diameter	12.7 mm
Package length	15.88 mm
Package form	4 Terminals
method of packing	Bulk
Rated power dissipation(P)	0.75 W
resistance	74.1 Ω
Resistor type	FIXED RESISTOR
series	H(OTHER)
technology	METAL FOIL
Temperature Coefficient	2 ppm/°C
Tolerance	0.5%
Operating Voltage	350 V

Preview

Download Datasheet

View All

H Series

Vishay Foil Resistors

New Generation of Secondary Standards Hermetically Sealed High Precision Bulk

Metal

Foil Technology Resistors with TCR of ± 2 ppm/°C, Tolerance of ± 0.001 % and

Load Life Stability of ± 0.005 % (Metrology, Laboratory, Instrumentation, Industrial)

FEATURES

•

Temperature coefficient of resistance (TCR):

± 2 ppm/°C typical (- 55 °C to + 125 °C, + 25 °C

ref.).

For

ultra

high

performances

(instrumentation and metrology) please refer to

the last page

•

Resistance range: 5

to 1.84 MΩ (higher or

lower values of resistance available)

•

Vishay Foil resistors are not restricted to standard values;

specific “as required” values can be supplied at no extra

cost or delivery (e.g. 1K2345 vs. 1K)

•

Power rating: 0.3 W to 2.5 W at + 25 °C (depending on

model - see table 2)

•

Tolerance: to ± 0.001 % (10 ppm)

•

Load life stability to ± 0.002 % (20 ppm) at 25 °C, 2000 h

at rated power

•

Load life stability can be considerably improved

through in-house stabilization

•

Shelf life stability: ± 2 ppm for at least 6 years

(unaffected by humidity)

•

Electrostatic discharge (ESD) up to 25 000 V

•

Rise time: 1 ns effectively no ringing

•

Thermal stabilization time < 1 s (nominal value achieved

within 10 ppm of steady state value)

•

Current noise: 0.010 µV

RMS

/V of applied voltage (< - 40 dB)

•

Thermal EMF: 0.05 µV/°C typical

•

Voltage coefficient: < 0.1 ppm/V

•

Non-inductive: < 0.08 µH

•

Non-inductive, non-capacitive design

•

Non hot spot design

•

Terminal finish available: lead (Pb)-free or tin/lead alloy

•

Impervious to harmful environments - oil-filled

•

Compliant to RoHS directive 2002/95/EC

•

Prototype quantities available in just 5 working days

or sooner. For more information, please contact

foil@vishaypg.com

•

For better performances (values, TCR, tolerance, stability),

please see the HZ series

INTRODUCTION

The H series resistors are oil-filled, hermetically sealed ultra

precision resistors and are used as secondary standards for

metrology applications.

The hermetic sealing eliminates the ingress of moisture and

oxygen, while the oil acts as a thermal conductor, thus

eliminating the long-term degradation elements of unsealed

resistors, while at the same time allowing the device to

accept short periods of overload without degradation.

Vishay’s Bulk Metal

Foil outperforms all other resistor

technologies available today for applications that require

precision and stability. When combined with the hermetic

sealing and oil filling, the H series resistors become

the most

precise and stable resistors available.

With accuracies of 0.001 %, a resistance range from 5

to 1.84 MΩ, and long term shelf life of less than 2 ppm,

these devices are virtually secondary standards that can be

carried in sets for daily or periodic calibration of factory

measurement equipment.

The H series is available with laboratory and metrology

level precision and long-term stability with additional

in-house oriented processes such as: chip stabilization,

special TCR plotting, additional treatments for ultra

stability and special post manufacturing operations

(PMO). (Please refer to the last page)

TABLE 1 - TCR VS. RESISTANCE VALUE

RESISTANCE

VALUE (Ω)

100 to < 1M84

50 to < 100

5 to < 50

TYPICAL TCR AND MAX. SPREAD

(- 55 °C to + 125 °C, + 25 °C ref.)

(ppm/°C)

± 2 ± 2.5

± 2 ± 3.5

± 2 ± 4.5

FIGURE 1 - SHELF LIFE - VHA518-11

12K9 VS. QHE

0.9

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

- 0.1

100 200 300 400 500 600 700 800 900 1000

Note

• For maximum TCR < 1 ppm/°C, see VHP100 and contact

application engineering

* Pb containing terminations are not RoHS compliant, exemptions may apply

Resistance Change (ppm)

Time (Days)

Document Number: 63006

Revision: 23-Mar-10

For any questions, contact:

foil@vishaypg.com

www.foilresistors.com

Recommended Resources

Multifunctional zero-switching electronic ballast circuit

Ultrasonic atomizer circuit

Two-terminal delay switch circuit diagram using LM122

AC voltage measurement circuit with wide linear range

810 computer motherboard circuit diagram_32

Computer motherboard circuit diagram 815 5_01

WIFI 6 is coming, do you know about it?: Wi-Fi is about to get better and faster with a major update coming soon. While many routers are already equipped with chips that use the draft specification, 802.11ax Wi-Fi wasn't fully finalized unti...; btty038 RF/Wirelessly

【ST NUCLEO-H743ZI Review】(5)FREERTOS: This review is the last review of H7. It simply transplants FREERTOS. FREERTOS is a free real-time operating system, which is very suitable for microcontrollers. For applications that need to take car...; supermiao123 stm32/stm8

I plan to equip the slag EBAZ4205 with an extended version: I looked through my posts. I spent some time tinkering with slag a year and a half ago. It seems like a long time has passed, but it just seemed like yesterday. Recently, when I was cleaning up, I fou...; chenzhufly FPGA/CPLD

TMC5130 is used as a driver to drive the motor. Why does the motor hum when it is stationary?: I use TMC5130 as the driver to drive the motor. The motor hums when it is stationary. I don't know why. I would like to ask for advice from all the experts!...; 天命风流 Motor Drive Control（Motor Control）

Live broadcast at 10 am today [TI's optimized solutions in industrial multi-protocol communication applications]: The seminar will introduce the performance of AMIC110 and its advantages as an industrial communication chip, the more than 10 industrial protocols supported by AMIC110, and how to implement solutions...; EEWORLD社区 TI Technology Forum

Made an LED music spectrum analyzer: I was tidying up my room recently and found some old chips. I thought it would be a waste if they were wasted, so I made this for fun. Main control chip: STC12C5A60S2 Display mode: 16*8 dot matrix LED...; yaoyong DIY/Open Source Hardware

Shortcut: S0 S1 S2 S3 S4 S5 S6 S7 S8 S9 SA SB SC SD SE SF SG SH SI SJ SK SL SM SN SO SP SQ SR SS ST SU SV SW SX SY SZ T0 T1 T2 T3 T4 T5 T6 T7 T8 T9 TA TB TC TD TE TF TG TH TI TJ TK TL TM TN TO TP TQ TR TS TT TU TV TW TX TY TZ U0 U1 U2 U3 U4 U6 U7 U8 UA UB UC UD UE UF UG UH UI UJ UK UL UM UN UP UQ UR US UT UU UV UW UX UZ V0 V1 V2 V3 V4 V5 V6 V7 V8 V9 VA VB VC VD VE VF VG VH VI VJ VK VL VM VN VO VP VQ VR VS VT VU VV VW VX VY VZ W0 W1 W2 W3 W4 W5 W6 W7 W8 W9 WA WB WC WD WE WF WG WH WI WJ WK WL WM WN WO WP WR WS WT WU WV WW WY X0 X1 X2 X3 X4 X5 X7 X8 X9 XA XB XC XD XE XF XG XH XK XL XM XN XO XP XQ XR XS XT XU XV XW XX XY XZ Y0 Y1 Y2 Y4 Y5 Y6 Y9 YA YB YC YD YE YF YG YH YK YL YM YN YP YQ YR YS YT YX Z0 Z1 Z2 Z3 Z4 Z5 Z6 Z8 ZA ZB ZC ZD ZE ZF ZG ZH ZJ ZL ZM ZN ZP ZR ZS ZT ZU ZV ZW ZX ZY

Popular Components