Specifications are limited by the circuit and resistance value.
Please contact us separately.
3 digits
●
Resistor Networks：RNX, RTX, RTY
RNX
Circuit
Code
RNX: Custom Resistor Network
RTX,RTY: SOT-23 Resistor network
●
Resistor Networks：RDA, RDB
RDA
Circuit
Code
RDA: Dual terminator network
RDB: Differential terminator network
Example
Q20
Package
Symbol
Package type symbol＋
Number of pins
Example
T
Terminal
Surface Material
T :Sn
TE
Taping
TE: Plastic
embossed
5001
Custom
Code
Q20
Package
Symbol
Same as above
(Except Q24, N14, N08)
T
Terminal
Surface Material
T:Sn
TE
Taping
TE: Plastic
embossed
471J
Nominal Resistance
& Tolerance of R1
3 digits G: ±2%
J : ±5%
511J
H
Contact us when you have control request for environmental hazardous material other than the substance specified by EU-RoHS.
Nominal Resistance
T.C.R.
& Tolerance of R2 （×10
−6
/K）
3 digits G: ±2%
E :±25
J : ±5%
C:±50
H:±100
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
Contact our sales representatives before you use our products for applications including automotives, medical equipment and aerospace equipment.
Malfunction or failure of the products in such applications may cause loss of human life or serious damage.
Oct. 2020
www.koaglobal.com
■Ratings
Package
Package Symbol
Package Power Rating
Resistance Range
Max. Working Voltage
Rated Voltage
Rated Ambient Temp.
Operating Temp. Range
10Ω〜1kΩ
1.1kΩ〜
Q16
0.8W
QSOP
Q20
1.0W
Q24
1.0W
N08
0.4W
SOIC
N14
0.6W
N16
0.8W
SOT-23
S03
0.2W
Power Rating 200mW/Resistor Element
※1
Power Rating 50mW/Resistor Element
※1
100V
√￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣
Rated Power×Nominal Resistance Value, Rated Voltage should not exceed Max. Working Voltage.
＋70℃
−55℃〜＋125℃
※2
Above ratings are based on the thermal resistances using a multi-layer circuit board (EIA/JESD51). For mounting on a mono-layer board, power derating shall be needed. Please inquire of us about
conditions.
※1 Total power consumption of all elements should not exceed the package power rating.
※2 About operating temperature range −55℃〜＋155℃, We can provide as custom devices. Please inquire of us about it.
●Standard Resistor Networks
Circuit
Code
Circuit Schematics
（Top View）
Pin n
Number
of Pins
T.C.R.
（×10
−6
/K）
E:±25
C:±50
H:±100
Resistance Range
（Ω）
E24
and Absolute Tolerance
F:±1%
G:±2%, J:±5%
100〜100k 100〜100k
51〜100k
30〜100k
n/2
51〜100k
10〜100k
Circuit
Code
Circuit Schematics
（Top View）
Pin n
R1
Number
of Pins
T.C.R.
（×10
−6
/K）
E:±25
Resistance Range(Ω) (E24)
and Resistance Tolerance
G:±2%, J :±5%
Network Resistors
Pin n
RBA
R
8, 14, 16
R
20, 24
n/2
Number of Pins : n=8,16,20,24
RDA
R2
-
R1
R2
-
16, 20
C:±50
H:±100
Pin n
R1
Pin 1
Pin n
R
Pin n
Pin 1
Pin 1
n/2
R1=
150〜10k
R1: R2=
1:1〜1: 4
Pin n
Pin
:
Number of Pins
n
n=8,16,20,24
E:±25
n
100〜100k
Pin
100〜100k
R
Pin n
R1
R2
E:±25
C:±50
H:±100
RBB
R
Pin 1
n/2
Pin
8, 14, 16
20, 24
C
R
n
C:±50
R1
R
R2
R1
Pin 1
51〜100k
30〜100k
n/2
51〜100k
10〜100k
100〜40k
2R
n/2
RDB
Pin 1
R1
Pin 1
n/2
16, 20
R2
R1
Pin
Number
1
Pins
R
2
1
n/2
: n=8,16,20,24
R
of
H:±100
E:±25
C:±50
Pin 1
R1=
150〜10k
R1: R2=
1:1〜1: 4
Pin 1
Number of Pins : n=3,SOT-23 Only
Pin 1
100〜40k
Pin n
R
R
Pin n
RTX
n/2
Pin n
R
1
R
2
R
2R
2R
R
R
2
3
SOT-23
Only
2R
2R
Number of Pins : n=8,16,20,24
RLA
R
2R
2R
R
2R
2R
n/2
14, 16
H:±100
1k〜30k
H:±100
2R
51〜40k
2R
51〜40k
2R
Pin 1
Pin 1
n/2
ber of Pins : n=8,16,20
Number of Pins : n=3,SOT-23 Only
Pin 1
n/2
■Performance
Test Items
Resistance
T.C.R.
Resistance to soldering heat
Rapid change of temperature
Moisture resistance
Endurance at 70℃
High temperature exposure
Performance Requirements
ΔR±
（％＋0.05Ω）
Limit
Typical
25℃
＋25℃/−55℃, ＋25℃/125℃
260℃±5℃, 10s±1s
−55℃
（30min.）
/＋125℃
（30min.）, 100 cycles
40℃±2℃, 90〜95%RH, 1000h
1.5h ON/0.5 h OFF cycle
70℃±2℃, 1000 h
1.5 h ON/0.5 h OFF cycle
＋125℃, 1000 h
Within specified tolerance
Within specified T.C.R.
0.1
※3
0.5
※3
Test Methods
0.05
0.05
0.05
0.05
0.10
0.5
※3
0.25
※3
0.25
※3
※3 Guaranteed value differs depending on resistance value.
■Precautions for Use
・
he resistor of this product is formed by narrow patterning a thin metal film. Thus, application of excessive voltage causes burn and destruction of the resistive
T
film, abnormality in resistance or open resistance and loss of proper function. The properly and electrostatically measured taping materials are used for the
components, but attention should be paid to the fact that there is some danger the parts may be destructed by static electricity(equivalent to 500V and more at
100pF, 1.5kΩ) to cause a change in resistance in the conditions of an excessive dryness when mounting on the boards. Similarly, care should be given not to apply
the excessive static electricity at the time of mounting on the boards. When designing, consideration can be taken into withstanding ESD for customized KPC
products. Please consult with us about the details.
・Hand
soldering by iron soldering or repairment are not recommended because KPC is a multi-pin product.
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
Contact our sales representatives before you use our products for applications including automotives, medical equipment and aerospace equipment.
Malfunction or failure of the products in such applications may cause loss of human life or serious damage.
Oct. 2020
www.koaglobal.com
NETWORKS
EU
RoHS
KPC RIA
KPC RNX
Isolated Resistor Networks
Custom Resistor Networks
■Applications
・
utomotives, medical instrument, industrial machines, Measurement equipment
A
・
omputers and networks
C
・
igh precision OP amp circuit, High precision voltage divider
H
■Features
・
High precision resistor networks
Combination of different resistance is available for custom circuit.
Analog circuits are very important , and the application of transistors in analog circuits is of paramount importance. Being able to correctly understand the amplification region, saturation region, a...
This content is originally created by EEWORLD forum user hpq916 . If you want to reprint or use it for commercial purposes, you must obtain the author’s consent and indicate the source...
I recently wanted to use LTC2380-24 as my acquisition, but there are two problems
1. There are some resistor and capacitor opts on the official evaluation board, but I don’t really understand how to c...
What is the power-off mode? Generally, to save power, you just put it in standby mode. To exit the power-off mode, you can only use hardware reset, not interrupts. Why?...
From: https://blog.adafruit.com/2020/05/11/ci ... -released/This is the first beta release of CircuitPython 5.4.0. At the time of release, this version adds basic low-power support in time.sleep().New...
On March 16, 2017, in response to the national policy call of "One Belt, One Road", Mr. Chen Ronghua, Chairman of China International New Energy Storage Power Technology Co., Ltd., went to Indonesi...[Details]
At present, many people focus
on the
number
of
LED
lumens
, but pay less attention to the heat dissipation of LED lamps. In fact, the number of LED lumens is increasing rapidly...[Details]
In the current LED power driver, electrolytic capacitors must be used, and the life of small electrolytic capacitors can only reach a few thousand hours. However, the driver using the patented IC...[Details]
Abstract: This article mainly introduces the solution of Delta
UPS
using its own
monitoring
software on a certain railway.
Keywords: UPS moni...[Details]
1. Introduction
1.1 Development of Electric Actuators
Electric actuator, also known as electric actuator, electric equipment, electric head, is a commonly used mechatronic equipment in the field ...[Details]
The problem occurred when compiling with stvd before! After searching online for a long time without finding a reasonable solution, I finally figured it out by myself. Select the default Debug here ...[Details]
China Energy Storage Network News
: Liu Zhenya, Chairman of the State Grid Corporation of China, said on the 25th that the conditions for building a global energy Internet are already in plac...[Details]
Nearly two years have passed since the media broke the news that OPPO was making chips, and today OPPO officially released its first self-developed chip.
Recently at OPPO INNO DAY 2021...[Details]
In recent years, with the increase in clock frequencies of microprocessors, DSPs, and digital ASICs, the data rate and bus throughput of backplane signals have also been steadily increasing in some e...[Details]
Composition of electric vehicle motor controller system
Electric vehicle motor controller systems usually consist of the following main components:
1. Motor: The electric vehicle motor is...[Details]
STMicroelectronics (ST) recently released its first quarter 2024 financial report, with revenue of US$3.47 billion, gross profit margin of 41.7%, operating profit margin of 15.9%, and net profit of...[Details]
1 Principle of inner wheel difference
The inner wheel difference is the difference between the turning radius of the front inner wheel and the turning radius of the rear inner wheel when the vehicl...[Details]
The XCM524 series is a 1PKG multifunctional IC that combines a 600mA synchronous rectification step-down DC/DC converter with a built-in driver transistor and a VDR composed of a VR and VD with ult...[Details]
According to foreign media reports, Shanghai Quectel Communications Technology Co., Ltd. launched the Proactive Security Solution, an intelligent driving solution designed to improve driving safety. ...[Details]
Default configuration after reset: After reset, all pins are in floating input mode. However, a few pins may have a different behavior. Refer to the datasheet pinout description for all details. Wh...[Details]
Medical Electronics
京公网安备 11010802033920号
EEWORLD
