-
Before relocation, the flash needs to be initialized. The flash initialization is divided into norflash and nandflash. norflash does not need to be initialized, so no operation is required.
...[Details]
-
introduction
With the widespread popularity of Internet technology, different companies in various fields around the world have reached a consensus on "connecting devices to the Internet". However,...[Details]
-
An information exchange terminal is an embedded device that provides information processing, storage and query functions for personalized users with the main purpose of information exchange. Comp...[Details]
-
South Korea's LG Electronics said its board of directors has decided to reorganize the LG Group by spinning off some of its subsidiaries, including display chip designer Silicon Works Co Ltd, to form...[Details]
-
Even though Samsung is not doing well in the Chinese market, it still has a say in the global market, and this say is not low. Samsung’s global TV market share in terms of sales reached 31.5 percen...[Details]
-
Introduction: Data collection and processing are widely used in the field of automation. Due to different application occasions, the hardware required for data collection and processing is also dif...[Details]
-
The code comes from the 2016 Beidou Cup, which is used to measure air pm2.5. The sensor estimates the particle concentration by measuring the duty cycle of the signal. (1) TimerB settings, working ...[Details]
-
Abstract: Based on NI's intelligent FPGA board and graphical programming software LabVIEW, a universal data acquisition system is designed and implemented. Compared with traditional data acquisition ...[Details]
-
The need to accurately characterize the linear and nonlinear characteristics of high-frequency devices and the trend toward increasing subsystem integration in today’s electronic devices are changing ...[Details]
-
The complete zero calibration process includes calibrating the zero point for each axis. KUKAC4 can specify a reference value (for example: 0°) for any axis at the zero point position through the t...[Details]
-
The analog-to-digital conversion subsystem is used to convert the analog signal collected by the sensor into a digital signal. The analog-to-digital conversion subsystem of the Arduino UNO R3 main pr...[Details]
-
On March 9, Shenzhen Shenkeda Intelligent Equipment Co., Ltd. (hereinafter referred to as Shenkeda) was listed on the Science and Technology Innovation Board of the Shanghai Stock Exchange. The stock...[Details]
-
Cyrus, the B-side of Huawei Smart Car. In 2021, Cyrus SF5 will be sold through Huawei channels, and Huawei has since launched a smart car selection model. By the end of the year, both parties launc...[Details]
-
Although many smart locks (such as fingerprint recognition and IC card recognition) have been launched, these products are targeted at specific fingerprints or valid cards and can only be used in b...[Details]
-
Tesla recently released an OTA upgrade package for firmware version V12.5.4.1, claiming that it had upgraded the vehicle's smart summon function, adding a remote driving function to it, allowing ca...[Details]