85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Potentiometer Specifications
Initial Electrical Characteristics
1
Conductive Plastic Element
Cermet Element
Standard Resistance Range
Linear Tapers (A, B, E, & H) ..................................................................(B & E) 1 K ohms to 1 megohm ............. (A & H) 100 ohms to 1 megohm
Audio Tapers (C, D, F, G, S, & T) .........................................................(D, G, S, & T) 1 K ohms to 1 megohm ... (C & F) 1 K ohms to 1 megohm
Total Resistance Tolerance .........................................................................±20 % or 10 % ...................................... ±10 % or 5 %
Absolute Minimum Resistance ...................................................................2 ohms maximum .................................. 2 ohms maximum
Operating Temperature Range ...................................................................-40 °C to +125 °C.................................. -40 °C to +125 °C
Storage Temperature Range ......................................................................-55 °C to +125 °C.................................. -55 °C to +125 °C
Temperature Coefficient Over Storage Temperature Range ......................±1,000 ppm/°C ...................................... ±150 ppm/°C
Vibration (Single Section) ...........................................................................15 G ....................................................... 15 G
Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum
Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum
Shock (Single Section) ...............................................................................30 G ....................................................... 30 G
Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum
Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum
Total Resistance Shift ...........................................................................±10 % maximum ................................... ±5 % maximum
Rotational Life (No Load) ............................................................................100,000 cycles ...................................... 100,000 cycles
Total Resistance Shift ...........................................................................(Linear taper) 10 ohms or ..................... (All tapers) ±5 % TRS maximum
Moisture Resistance (MIL-STD-202, Method 103, Condition B)
Total Resistance Shift ...........................................................................(B & E tapers) ±10 % maximum ........... ±5 % maximum (all tapers)
IP Rating .....................................................................................................IP 40 ...................................................... IP 40
Starting and Running Torque (Non-Locking Bushings)
Single Section ................................................................................................................................................................. 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Dual Section .................................................................................................................................................................... 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Triple Section ................................................................................................................................................................... 0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.)
Quadruple Section .......................................................................................................................................................... 0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.)
Starting and Running Torque (Locking Bushings) ..................................................................................................... 0.14 to 2.82 N-cm (0.2 to 4.0 oz.-in.)
Shaft Locking Torque with Locknut @ 10 in-lb. (B & E Bushings) ........................................................................................................ 14 N-cm (20 oz-in.)
Mounting ...................................................................................................................................................................1.7-2.0 N-m (15-18 lb.-in.) maximum
Weight (Single Section).............................................................................................................................................................................. 21 grams maximum
(Each Additional Section) ...................................................................................................................................................................... 6 grams maximum
Terminals .......................................................................................................................................................................... Printed circuit terminals or J-Hooks
Soldering Condition .................................................................. Recommended hand soldering using Sn95/Ag5 no clean solder, 0.025 ” wire diameter.
Maximum temperature 399 °C (750 °F) for 3 seconds. No wash process to be used with no clean flux.
Marking.......................................................................... Manufacturer’s trademark, wiring diagram, date code and resistance, manufacturer’s part number
Ganging (multiple section potentiometers) ..................................................................................................................................................... 4 cup maximum
Hardware ...........................................One lockwasher and one mounting nut is shipped with each potentiometer, except where noted in the part number.
For dimensional drawings see pages 3 & 4.
For ordering information see page 5.
NOTE: Model 81/82 performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
*RoHS Directive 2002/95/EC Jan 27, 2003 including Annex.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications
81/82 - 5/8 ” Square Single-Turn Panel Control
85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Rotary Switch Specifications
Initial Electrical Characteristics
1
Contacts:
DPST ...............................................................................................................................................................................N.O/N.O.,N.C./N.C. or N.O./N.C.
DPDT ................................................................................................................................................................................2 N.O./N.C. (break before make)
Power Rating (Resistive Load):
DPST ............................................................................................................ 2 A @ 125 volts RMS-60 Hz or 2 A @ 28 VDC, 1 A @ 250 volts RMS-60 Hz
DPDT ........................................................................................................................................................... 1 A @ 125 volts RMS-60 Hz or 1 A @ 28 VDC
Operating Temperature Range ...........................................................................................................................................................................0 °C to +70 °C
Storage Temperature Range ........................................................................................................................................................................ -65 °C to +125 °C
Vibration (Dual Section) ....................................................................................................................................................................................................... 8 G
(Triple Section) .................................................................................................................................................................................................... 5 G
(Quadruple Section) ........................................................................................................................................................................................... 3 G
Contact Resistance ........................................................................................................................................................................ 10 milliohms maximum
Contact Bounce ......................................................................................................................................................................... 0.1 millisecond maximum
Shock (Dual Section) ......................................................................................................................................................................................................... 20 G
(Triple Section) ...................................................................................................................................................................................................... 15 G
(Quadruple Section) ............................................................................................................................................................................................. 10 G
Contact Resistance ........................................................................................................................................................................ 10 milliohms maximum
Contact Bounce ......................................................................................................................................................................... 0.1 millisecond maximum
Rotational Life ..................................................................................................................................................................................................... 25,000 cycles
Switch Actuating Torque (50% Duty cycle @ Rated Power Load) .................................................................................. 1.41 to 4.94 N-cm (2 to 7 oz.-in.)
Contact Resistance ...................................................................................................................................................................... 100 milliohms maximum
Moisture Resistance (MIL-STD-202, Method 106, Condition B)
Contact Resistance (0.1 VDC-10 mA) ............................................................................................................................................ 10 milliohms maximum
Switch Housing Material ................................................................................................................. High temperature, flame retardant, thermosetting plastic
Mechanical Characteristics
1
Actuating Torque (Each Section, Switch Module Only) ....................................................................................................... 3.53 to 10.6 N-cm (5 to 15 oz.-in.)
Running Torque (Out of Detent, 2-4 Module Assembly)..................................................................................................... 0.21 to 1.41 N-cm (0.3 to 2 oz.-in.)
Detent ..................................................................................................................................................................................................... CW or CCW standard
Contact Materials ..........................................................................................................................................................................Fine silver with gold overlay
Terminal Styles .................................................................................................................................................................................................. Solder lug only
Standard Orientation ..............................................................................................................................................................In-line with control terminals
Optional .......................................................................................................................................................................... Rotated 90 ° CCW from standard
Terminal Strength (Before and After Soldering Heat Exposure) .......................................................................................................... 0.9 Kg (2 lbs.) minimum
NOTE: Model 81/82 performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications
Please teach me how to convert high and low level signals into corresponding output analog voltage signals. The reference voltage is 2.5V, the high level is above 2.5V, and the low level is above 2.5V...
Please help me, as shown in the title WAKE_UP_THS (5Bh) register threshold setting configuration, the datasheet saysSo, when FS_XL = 4g and WK_THS[5:0] is set to 2, the wake-up threshold = 2*4/2^6 = 1...
[i=s]This post was last edited by Ricky7 on 2019-12-25 13:36[/i]I just bought a NUCLEO-F103RB board.
I used STM32CUBEIDE to test the LED running light program, and it ran normally under DEBUG.
I want ...
Time is ticking away,
Before we know it, it’s the end of the year.
Happy every year,
Everything is promising.2021 is a year of historic leap for ams OSRAM. During this period, ams Semiconductor and OS...
[i=s]This post was last edited by Num1 on 2020-7-31 14:56[/i]Seven Rules for Measuring Oscilloscope NoiseHow do you accurately measure noise on an oscilloscope? Here is a quick primer on how to measur...
On December 29, according to Cailianshe, Samsung Electronics sent a letter to its customers today, notifying them that it expects NAND product manufacturing capacity may be affected by the Xi'an epid...[Details]
Purpose: To use the remote control to communicate with the microcontroller, and display the codes corresponding to the remote control buttons in hexadecimal format on the digital tube. The IO port ...[Details]
As a liquid level measuring device with simple structure, direct observation and convenient installation, the magnetic flap level gauge is increasingly loved by people for its unique advantages. Its ...[Details]
Check the AC and DC voltage of the circuit; it is convenient to use a pointer multimeter or a setting multimeter to check the continuity of the circuit. The following figure shows the UT61C digital m...[Details]
TSMC, the world's leading wafer foundry, has recently been reported by Japanese media to be planning to build a semiconductor factory in Kumamoto Prefecture, Japan. In response, Mitsubishi Electric o...[Details]
The band edge of wireless communication products usually refers to the clutter signal of 1MHz around the edge of the entire frequency band. The energy in this frequency band is not fixed, and the ...[Details]
my country's first "super highway" - the Hangzhou-Shaoxing-Ningbo Smart Highway - is about to be built. It will set up dedicated lanes for autonomous driving to support the free travel of autonomous ...[Details]
The fast charging technology of power batteries has very high requirements for the battery system and charging system, and also has a significant impact on the development of the electric vehicle ind...[Details]
On June 10, according to SamMobile, Samsung Galaxy Fold 2 does not support S Pen. SamMobile claims the Samsung Galaxy Fold 2 will use ultra-thin flexible glass (UTG), which is not strong eno...[Details]
Today, the iQOO Z1, which many people have been looking forward to, has finally been released. This phone not only has powerful performance and supports 5G networks, but also launched a limited editi...[Details]
August 13th news, Ziguang Guowei and the National New Energy Vehicle Technology Innovation Center (abbreviated as " The two sides will focus on new energy Collaborative innovation and cross-borde...[Details]
On July 30, the U.S. Department of Energy's Oak Ridge National Laboratory (ORNL) successfully demonstrated the first 270-kilowatt wireless electric vehicle (EV) charging technology, once again brea...[Details]
EV wiring harness trends: a design revolution
The rise of electric vehicles (EVs) is a major force for innovation in automotive wiring.
Electric and hybri...[Details]
TI Technology Forum
京公网安备 11010802033920号
EEWORLD
