• Extremely low wavelength dependent loss (WDL) and PDL
• Up to 10-channel arrays
Applications
• EDFA
• Raman amplifiers
• Add/Drop monitoring
• DWDM systems
JDSU miniature integrated power monitors are designed for channel monitoring
in dense wavelength division multiplexing (DWDM) systems and Add/Drop
modules. They can also be used for signal/pump power monitoring in erbium
doped fiber amplifiers (EDFAs) and Raman amplifiers where integrated solutions
tend to replace traditional fused fiber tap + photodiodes. The miniaturized
version is a high performance active hybrid device that incorporates a micro-optic
tap coupler and high-sensitivity InGaAs photodiode in a miniature package. It
offers high reliability, compact footprint with ultra-wide bandwidth, and very low
polarization dependent loss (PDL).
NORTH AMERICA
:
800 498-JDSU (5378)
WORLDWIDE
:
+800 5378-JDSU
WEBSITE
:
www.jdsu.com
MINIATURE INTEGRATED POWER MONITOR
2
IPM Single Unit Diagram
(Specifications in mm unless otherwise noted.)
20.1 MAX
18.35
7.0 MAX
Ø 3.20
0.50 X 0.50
Ø 0.50
PITCH 2.54
IPM Array (6 to 8 channels) Diagram
(Specifications in mm unless otherwise noted.)
32.00
3.20
PITCH 2.54 X 11
=27.94
3.0
Ø 0.51
Ø 1.14
PIN 1
27.94
32.50
22.86
6.00
IPM Array Pinout
(8 channel only)
BOTTOM VIEW
Pin
1
2
3
4
5
6
7
8
9
10
11
12
Description
Anode (Common)
Cathode 1
Cathode 2
Anode (Common)
Cathode 3
Cathode 4
Cathode 5
Anode (Common)
Cathode 6
Cathode 7
Anode (Common)
Cathode 8
MINIATURE INTEGRATED POWER MONITOR
3
Specifications
Parameter
Wavelength range
C-Band
L-Band
C+L Band
Insertion loss (input to output)
Wavelength flatness (input to output)
Polarization dependent loss (input to output)
PMD (input to output)
Optical return loss
PD operating bias voltage, V
R
PD responsivity
PD linearity
PD dark current
PD cut-off frequency
Input optical power
Operating temperature
Storage temperature
Tensile load
Package dimensions
Single unit
6 to 8 channels array
10 channels array
Fiber type
Pigtail color code
Specification
Maximum
Maximum
Maximum
Maximum
Minimum
Minimum
Maximum
Maximum
Maximum
1510-1580 nm
1560-1625 nm
1510-1625 nm
See table below
0.002 dB/nm
0.03 dB
0.1 ps
45 dB
-5 V (typical)
0.8 A/W (for net responsivity, see table below)
±10%
1 nA @ V
R
= -5 V and 23 °C
600 MHz @ V
R
= -5 V and R
L
= 50 W
See table below
-20 to 75 °C
-40 to 85 °C
5N
3.2 mm x 18.5 mm
32 mm x 32.5 mm x 6 mm
38.8 mm x 32.5 mm x 6 mm
SMF-28, 250 µm primary coating
Black (input port); Clear (output port)
Note: Parameters are specified for the signal wavelength range, all polarization states, and operating temperature range without connector unless otherwise stated.
Tap Ratio and Insertion Loss Table
Code
Tap Ratio
Maximum Insertion Loss
(Input to Output)
0.5 dB
0.5 dB
0.5 dB
0.5 dB
0.6 dB
0.8 dB
Minimum Net Responsivity
1
Maximum Optical Power
2
1
2
3
4
5
T
1%
2%
3%
4%
5%
10%
0.008 A/W
0.016 A/W
0.024 A/W
0.032 A/W
0.040 A/W
0.080 A/W
500 mW
250 mW
150 mW
125 mW
100 mW
50 mW
1. The net responsivity is defined as the ratio of the PD current output and optical power measured at output fiber.
2. The maximum optical power is the maximum value of the power at input port within the PD linearity range specified.
MINIATURE INTEGRATED POWER MONITOR
Ordering Information
For more information on this or other products and their availability, please contact your local JDSU account manager or
JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at
customer.service@jdsu.com.
Sample: IPM-C82310010
IPM-
Code
C
L
1
Wavelength
C-band
L-band
C + L bands
Code
1
2
3
4
5
T
Tap Ratio
1%
2%
3%
4%
5%
10%
Code
2
3
4
Package Size
Single
unit
6-8
channel
array
10-channel array
001
Code
0
1
2
3
4
5
8
9
A
B
C
Connector Type
No
connector
FC/PC
FC/SPC
FC/APC
SC/SPC
SC/APC
ST
FC/UPC
SC/UPC
LC/SPC
LC/UPC
Code
1
6
7
8
T
Channels
Single
device
6-channel array
7-channel array
8-channel array
10-channel array
Code
1
2
4
5
Fiber Length
1m
2m
0.5 m
1.5 m
SMF-28 is a registered trademark of Corning Incorporated.
ST is a registered trademark of Lucent Technologies.
All statements, technical information and recommendations related to the products herein are based upon information believed to be
reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any
inaccuracies. The user assumes all risks and liability whatsoever in connection with the use of a product or its application. JDSU reserves
the right to change at any time without notice the design, specifications, function, fit or form of its products described herein, includ-
ing withdrawal at any time of a product offered for sale herein. JDSU makes no representations that the products
herein are free from any intellectual property claims of others. Please contact JDSU for more information. JDSU and the JDSU logo are
This is a push-pull switching power supply made by Saber that I referred to. It uses the SG3824 PWM chip. I cannot get the waveform by connecting according to the datasheet. I would like to ask for yo...
[i=s]This post was last edited by zhang1gong on 2022-4-24 21:59[/i]The title cannot accommodate more words, rewrite the title:
The results of cross-compiling Tina Linux system under several different ...
IntroductionThe optimization control of the position of the solar panel is achieved by real-time collection of the output voltage of the solar panel, which is controlled by a single-chip microcomputer...
I am working on a project that requires low power consumption. The chip I am using is STM32F103C8T6. I modified the program like this:Stm32_Clock_Init(2); The crystal oscillator is 8M, double the freq...
New hot spots in automobiles: TI's star products in T-BOX (in progress)InterfacePHYSection 1 DP83TC811S-Q1: Automotive Ethernet makes your T-BOX even more powerfulCANStay tuned………New hotspot in automo...
Adafruit's new product, the Adafruit PyBadge LC, is only the size of a credit card and can run CircuitPython, MakeCode Arcade or Arduino. [b]Main Features[/b]: [list] [*]ATSAMD51J19 controller, 120MHz...
Currently, the automotive industry is at a turning point in powertrain research and development. Consumer demand is becoming increasingly important, prompting powertrain developers to shift their f...[Details]
The servo drive is one of the indispensable key components in the field of modern industrial automation. It achieves precise control of the mechanical system by precisely controlling the speed, pos...[Details]
With the rapid development of autonomous driving technology, intelligent driving has become the focus of technological competition in the automotive industry. As a pioneer in this field, Tesla has ...[Details]
On October 27, the Organization Department of the Liaoning Provincial Party Committee issued a public notice of candidates for leadership positions. Among them: Li Xianfeng, male, Han nationality, bor...[Details]
"Tech Unheard" is a technology interview podcast hosted by Arm CEO Rene Haas, focusing on the forces of change in the industry and exploring cutting-edge technologies and the stories behind them. T...[Details]
An autonomous vehicle is a vehicle that can sense the environment and operate without human involvement. It can do everything that an experienced human driver does. In a recent study, experts ident...[Details]
I have used Qemu to run/debug arm linux several times, but I forgot about it after a while. I had to look up the information again every time, which wasted a lot of time. This time I made the whole...[Details]
The various controllers in new energy vehicles mainly include: vehicle control unit (VCU), engine control unit (ECU), motor control unit (MCU) and battery management system (BMS).
The th...[Details]
The field of autonomous driving technology is advancing rapidly. The number of highly automated vehicles shipped annually is expected to grow at a compound annual growth rate of 41% from 2024 to ...[Details]
CNC machine tools, the full name of which is Computer Numerical Control Machine Tool, are automated machine tools that are controlled by computers. CNC machine tools are widely used in mechanical p...[Details]
In cars or automobiles, LEDs have evolved to become the lighting of choice. Whether it is a rear taillight or an indicator light in the instrument panel, as shown in Figure 1 below, LEDs are now in...[Details]
There are many versions of the "small three electrics" of new energy vehicles. However, the most recognized version is the "small three electrics" consisting of the on-board charger OBC, the on-boa...[Details]
I am using the OK6410 development board, which comes with two kernels (2.6.32 and 3.0.1 have been tested)
First, let’s talk about how to make a logo:
Linux Logo Maker: LogoMaker.tgz 4.7MB...[Details]
As a non-famous self-media person in the automotive industry, I have noticed that with the rise of domestic new energy vehicles in the past two years, various car companies have also given names to...[Details]
The servo motor is a high-precision, high-response speed motor, which is widely used in automation equipment, robots, CNC machine tools and other fields. In the control of the servo motor, the enab...[Details]
TI Technology Forum
京公网安备 11010802033920号
EEWORLD
