EEWORLDEEWORLDEEWORLD

Part Number

Search

T205M1HAQE

Description
TOGGLE SWITCH,RIGHT ANGLE,DPDT,ON-OFF-ON,R ANGLE PC TAIL TERMINAL,TOGGLE,6
CategoryMechanical and electronic products    switch   
File Size476KB,6 Pages
ManufacturerC&K Components
Environmental Compliance
Download Datasheet Parametric View All

T205M1HAQE Overview

TOGGLE SWITCH,RIGHT ANGLE,DPDT,ON-OFF-ON,R ANGLE PC TAIL TERMINAL,TOGGLE,6

T205M1HAQE Parametric

Parameter NameAttribute value
Is it Rohs certified?conform to
Reach Compliance Codenot_compliant
ECCN codeEAR99
Actuator angle25 deg
Executor completedCHROME
Actuator length0.22 inch
Actuator materialBRASS
Actuator typeTOGGLE
body width9.144 mm
body height11.6332 mm
Body length or diameter8.128 mm
Casing diameter0.24 inch
Nozzle length0.22 inch
Casing type1/4-48
center contact materialCOPPER ALLOY
Center contact platingSILVER
Contact (AC) maximum rated R load2A@120VAC
Maximum contact current (AC)2 A
Maximum contact current (DC)2 A
Contact (DC) maximum rated R load2A@28VDC
Contact functionON-OFF-ON
Contact resistance0.02 mΩ
Maximum contact voltage (AC)120 V
Maximum contact voltage (DC)28 V
Dielectric withstand voltage1400VAC V
Electrical life30000 Cycle(s)
End contact materialCOIN SILVER
End contact platingSILVER
Shell materialSTAINLESS STEEL
Insulation resistance10000000000 Ω
insulator materialGLASS FILLED NYLON
JESD-609 codee4
Manufacturer's serial numberT205
Installation featuresTHROUGH HOLE-RIGHT ANGLE
Maximum operating temperature85 °C
Minimum operating temperature-30 °C
PCB hole count6
sealEPOXY
SolderabilityMIL-STD
surface mountNO
switch functionDPDT
Switch typeTOGGLE SWITCH
Terminal surfaceSilver (Ag)
Terminal length0.128 inch
Terminal materialCOPPER ALLOY
Termination typeSOLDER
T Series
Subminiature Toggle Switches
Features/Benefits
Compact size—small footprint
Single and double pole models
PC and panel mount
options available
Typical Applications
Hand-held telecommunications
Instrumentation
Medical equipment
RoHS compliant models available
Models Available
Specifications
CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or
DC max. Q contact material (TX01 models): 3 AMPS @
120 V AC or 28 V DC. All other models: 2 AMPS @
120 V AC or 28 V DC. See page F-37 for additional ratings.
ELECTRICAL LIFE: TX01 models: 60,000 make-and-break
cycles at full load. All other models: 30,000 cycles.
CONTACT RESISTANCE: Below 20 m
typ. initial @
2-4 V DC, 100 mA, for both silver and gold plated contacts.
INSULATION RESISTANCE: 109
min.
DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level.
OPERATING TEMPERATURE: –30ºC to 85ºC.
SOLDERABILITY: Per MIL-STD-202F method 208D, or
EIA RS-186E method 9 (1 hour steam aging).
NOTE:
Any models supplied with P, R, Q, B or G contact material are RoHS compliant
and compatible.
NOTE:
Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Materials
CASE: Glass filled nylon 6/6, flame retardant, heat stabilized or
diallyl phthalate (DAP), (UL 94V-0) or glass filled nylon 4/6, flame
retardant, heat stabilized.
ACTUATOR: Brass, chrome plated.
BUSHING: Brass, nickel plated.
HOUSING: Stainless steel.
SWITCH SUPPORT: Brass, matte-tin plated.
END CONTACTS: B contact material: Copper alloy, with gold plate
over nickel plate. Q contact material: Coin silver, silver plated.
See above for additional contact materials.
CENTER CONTACTS & TERMINALS: B contact material: Copper alloy,
with gold plate over nickel plate. Q contact material: Copper alloy,
silver plated. See page F-42 for additional contact materials.
TERMINAL SEAL: Epoxy.
HARDWARE: Nut & Locking Ring: Brass, nickel plated.
Lockwasher: Steel, nickel plated. Additional hardware available
separately, see Section N.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages F-33 thru F-37. For additional options not shown in catalog, consult Customer Service Center. All models
have epoxy terminal seal and are compatible with all “bottom-wash” PCB cleaning methods.
Switch Function
T101
SPDT On-None-On
T102
SPDT Off-None-On
T103
SPDT On-Off-On
T105
SPDT Mom.-Off-Mom.
T107
SPDT On-Off-Mom.
T108
SPDT On-None-Mom.
T201
DPDT On-None-On
T203
DPDT On-Off-On
T205
DPDT Mom.-Off-Mom.
T207
DPDT On-Off-Mom.
T208
DPDT On-None-Mom.
T211
DPDT On-On-On.
Actuator
P3
Flatted,
anti-rotation,
.490" high
S
.370" high
K
Locking lever, round tip
L1
.640" high
M1
.220" high
S1
.410" high
M
.210" high
L
.290" high
Bushing
H
.220" high, threaded, flat
H9
.220" high, unthreaded, flat
CF
Splashproof, .310" high, threaded, flat
D9
.260" high, unthreaded, keyway
T
.310" high, threaded, flat
T9
.310" high, unthreaded, flat
TD
.260" high, threaded, keyway
TK
.310" high, threaded, keyway
Y
.220" high, threaded, keyway
Y9
.220" high, unthreaded, keyway
Terminations
A
Right angle, PC thru-hole
AV
Vertical right angle,
PC thru-hole
C
PC Thru-hole
V3
Vertical mount V-bracket
Z
Solder lug
W
Wire wrap
Contact Material
B
Gold
P
Gold, matte tin
Q
Silver
G
Gold over silver
R
Gold over silver, matte-tin
Seal
E
Epoxy
F
Toggle
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
F–32
www.ck-components.com
I am working on a paper on an anti-lost device based on 51 and 52 microcontrollers. Can anyone help me?
I am working on a paper on an anti-lost device based on 51 and 52 microcontrollers. Can anyone help me? :)...
DFGDYH 51mcu
[SC8905 EVM Review] + Unboxing test and driver installation
I received the express on Saturday and couldn't wait to open the box to check. In the anti-static packaging bag were a TTF to USB module and the protagonist of this test - the power control board. The...
hujj Domestic Chip Exchange
How to detect inductor saturation | Comment and win a gift!
Inductors are an important part of DC/DC power supplies. Many factors need to be considered when selecting an inductor, such as inductance value, DCR, size, and saturation current. The saturation char...
EEWORLD社区 Power technology
Optimizing EMC and Efficiency in High Power DC/DC Converters Part 2
Optimizing EMC and Efficiency in High Power DC/DC Converters Part 2In Part 1 , we explained how choosing the right capacitor type, power inductor, switching frequency, and semiconductors is critical t...
okhxyyo Power technology
[McQueen Trial] + Line-following Driving + Ultrasonic Obstacle Avoidance
[align=left]The robot car's line patrol and ultrasonic obstacle avoidance can be said to be the two most attractive programs of the smart car. The following will briefly introduce these two programs. ...
youki12345 MicroPython Open Source section
Can the freewheeling diode be omitted when the MOS tube controls the solenoid valve?
As shown in the figure, the voltage at the source of the diode will be equal to 24V + the voltage generated by the inductor of the solenoid valve when the solenoid valve is reset. If this voltage can ...
sfcsdc Analog electronics

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Datasheet   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Room 1530, 15th Floor, Building B, No. 18 Zhongguancun Street, Haidian District, Beijing Telephone: (010) 82350740 Postal Code: 100190
Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号