POR Specifications....................................................................................................................................................81
AS Configuration Timing............................................................................................................................................86
DCLK Frequency Specification in the AS Configuration Scheme....................................................................................... 87
Minimum Configuration Time Estimation......................................................................................................................91
Remote System Upgrades......................................................................................................................................... 93
User Watchdog Internal Circuitry Timing Specifications..................................................................................................93
Document Revision History for the Intel Arria 10 Device Datasheet.......................................................................................... 99
Intel
®
Arria
®
10 Device Datasheet
2
Send Feedback
A10-DATASHEET | 2019.06.24
Send Feedback
Intel
®
Arria
®
10 Device Datasheet
This datasheet describes the electrical characteristics, switching characteristics, configuration specifications, and I/O timing
for Intel
®
Arria
®
10 devices.
Intel Arria 10 devices are offered in extended and industrial grades. Extended devices are offered in –E1 (fastest), –E2, and –
E3 speed grades. Industrial grade devices are offered in the –I1, –I2, and –I3 speed grades.
The suffix after the speed grade denotes the power options offered in Intel Arria 10 devices.
•
•
•
•
L—enables the device to operate at low static power while maintaining excellent performance.
S—standard power specification.
V—enables the device to run at lower than default V
CC
, reducing static and dynamic power while retaining equivalent
performance.
H—small device with high performance at the fastest speed grade (–1).
Related Information
Intel Arria 10 Device Overview
Provides more information about the densities and packages of devices in the Intel Arria 10 family.
Electrical Characteristics
The following sections describe the operating conditions and power consumption of Intel Arria 10 devices.
Operating Conditions
Intel Arria 10 devices are rated according to a set of defined parameters. To maintain the highest possible performance and
reliability of the Intel Arria 10 devices, you must consider the operating requirements described in this section.
Intel Corporation. All rights reserved. Agilex, Altera, Arria, Cyclone, Enpirion, Intel, the Intel logo, MAX, Nios, Quartus and Stratix words and logos are trademarks
of Intel Corporation or its subsidiaries in the U.S. and/or other countries. Intel warrants performance of its FPGA and semiconductor products to current
specifications in accordance with Intel's standard warranty, but reserves the right to make changes to any products and services at any time without notice. Intel
assumes no responsibility or liability arising out of the application or use of any information, product, or service described herein except as expressly agreed to in
writing by Intel. Intel customers are advised to obtain the latest version of device specifications before relying on any published information and before placing
orders for products or services.
*Other names and brands may be claimed as the property of others.
ISO
9001:2015
Registered
Intel
®
Arria
®
10 Device Datasheet
A10-DATASHEET | 2019.06.24
Absolute Maximum Ratings
This section defines the maximum operating conditions for Intel Arria 10 devices. The values are based on experiments
conducted with the devices and theoretical modeling of breakdown and damage mechanisms. The functional operation of the
device is not implied for these conditions.
Caution:
Table 1.
Conditions outside the range listed in the following table may cause permanent damage to the device. Additionally, device
operation at the absolute maximum ratings for extended periods of time may have adverse effects on the device.
Absolute Maximum Ratings for Intel Arria 10 Devices
Symbol
V
CC
V
CCP
V
CCERAM
V
CCPT
V
CCBAT
V
CCPGM
V
CCIO
Core voltage power supply
Periphery circuitry and transceiver fabric interface power supply
Embedded memory power supply
Power supply for programmable power technology and I/O pre-driver
Battery back-up power supply for design security volatile key register
Configuration pins power supply
I/O buffers power supply
Description
Condition
—
—
—
—
—
(1)
Minimum
–0.50
–0.50
–0.50
–0.50
–0.50
–0.50
–0.50
–0.50
–0.50
–0.50
–0.50
–0.50
–0.50
–0.50
–0.50
–0.50
Maximum
1.21
1.21
1.36
2.46
2.46
2.46
4.10
2.46
2.46
1.34
1.34
2.46
1.27
4.10
2.46
2.46
Unit
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
continued...
3 V I/O
LVDS I/O
V
CCA_PLL
V
CCT_GXB
V
CCR_GXB
V
CCH_GXB
V
CCL_HPS
V
CCIO_HPS
Phase-locked loop (PLL) analog power supply
Transmitter power supply
Receiver power supply
Transceiver output buffer power supply
HPS core voltage and periphery circuitry power supply
HPS I/O buffers power supply
—
—
—
—
—
3 V I/O
LVDS I/O
V
CCIOREF_HPS
HPS I/O pre-driver power supply
—
(1)
The LVDS I/O values are applicable to all dedicated and dual-function configuration I/Os.
Intel
®
Arria
®
10 Device Datasheet
4
Send Feedback
Intel
®
Arria
®
10 Device Datasheet
A10-DATASHEET | 2019.06.24
Symbol
V
CCPLL_HPS
I
OUT
T
J
T
STG
HPS PLL power supply
DC output current per pin
Description
Condition
—
—
—
—
Minimum
–0.50
–25
(2)(3)(4)(5)
(6)
Maximum
2.46
25
125
150
Unit
V
mA
°C
°C
Operating junction temperature
Storage temperature (no bias)
–55
–65
Related Information
•
•
AN 692: Power Sequencing Considerations for Intel Cyclone 10 GX, Intel Arria 10, and Intel Stratix 10 Devices
Provides the power sequencing requirements for Intel Arria 10 devices.
Power-Up and Power-Down Sequences, Power Management in Intel Arria 10 Devices chapter
Provides the power sequencing requirements for Intel Arria 10 devices.
Maximum Allowed Overshoot and Undershoot Voltage
During transitions, input signals may overshoot to the voltage listed in the following table and undershoot to –2.0 V for input
currents less than 100 mA and periods shorter than 20 ns.
The maximum allowed overshoot duration is specified as a percentage of high time over the lifetime of the device. A DC signal
is equivalent to 100% duty cycle.
For example, a signal that overshoots to 2.70 V for LVDS I/O can only be at 2.70 V for ~4% over the lifetime of the device.
(2)
The maximum current allowed through any LVDS I/O bank pin when the device is not turned on or during power-up/power-down
conditions is 10 mA.
Total current per LVDS I/O bank must not exceed 100 mA.
Voltage level must not exceed 1.89 V.
Applies to all I/O standards and settings supported by LVDS I/O banks, including single-ended and differential I/Os.
Applies only to LVDS I/O banks. 3 V I/O banks are not covered under this specification and must be implemented as per the power
sequencing requirement. For more details, refer to
AN 692: Power Sequencing Considerations for Intel Cyclone
®
10 GX, Intel Arria
10, and Intel Stratix
®
10 Devices
and
Power Management in Intel Arria 10 Devices chapter.
Robots are very popular now, and they have been applied in many fields, such as automatic sweeping robots, automatic transport robots, etc. Robot technology is bound to be a major trend in the future....
This is the first project arranged in the fourth week. Use the web to obtain the data of the rapid iot kit. Implementation method: Use the computer's Bluetooth to connect to the rapid iot kit, use pyt...
Development Board Basics - Chew Slowly
CH582 is a 32-bit microprocessor based on RISCV architecture. The integrated development environment uses the MounRiver integrated development environment based ...
[i=s]This post was last edited by ljj3166 on 2020-9-13 01:53[/i]I got the WCH evaluation board for the third time.
Coincidentally, several times when I was looking for ICs, EEworld would promote a WCH...
Over the past 10 years, the number and complexity of electronic systems in automobiles have increased dramatically in terms of electronic control, in-car multimedia systems, and entertainment systems....
Recently, the largest distributed energy storage project in China and the first user-side distributed energy storage project in China, the Shaanxi Province Large-scale Distribution Area Distributed...[Details]
Recently, Microsoft brought an update to the Android 11 version for the first generation of Surface Duo. However, Microsoft's Surface Duo dual-screen mobile phone was originally intended to run Windo...[Details]
The official Weibo account of AUX Air Conditioning released the words of Zheng Jianjiang, Chairman of AUX Group Co., Ltd.: We welcome supervision and work together to build a national brand's quality...[Details]
Christine Boles, Vice President, Network and Edge Solutions Group and General Manager, Industrial Solutions Business, Intel Advancing the digital transformation underway in today’s manufacturing a...[Details]
Preface The official SDK uses the FreeRTOS real-time operating system. However, it is different from the general FreeRTOS in usage because some functions have been modified, or to put it bluntly, it ...[Details]
As we all know, most registers of PIC microcontrollers, including each storage unit of RAM data memory, can realize a series of complex operation functions such as shift, clear, and bit test. Howe...[Details]
August 22, 2024:
Pulsiv Limited, a power electronics technology innovator based in Cambridge, UK, has announced the launch of an ultra-high efficiency* 65W USB-C GaN optimized reference design ...[Details]
Liquid level controller refers to the control of high and low liquid levels through mechanical or electronic methods. It can control solenoid valves, water pumps, etc. to achieve semi-automation or f...[Details]
DSP/MCU brings vision to future mobile phones Nowadays, the popularity of smart phones is increasing, and people's demand for mobile phones is also increasing. However, for mobile phone manufacturer...[Details]
Not long ago, Xiaomi announced the discontinuation of the MIUI development version and previewed its "dream work" MIUI 12.5. At that time, many speculated that MIUI 12.5 would be first launc...[Details]
The ADC interrupt reading method is suitable for low-frequency ADC acquisition, while high-frequency AD acquisition must use DMA. The initialization function of ADC interrupt reading only adds an int...[Details]
Use 51 MCU external interrupt 0 to control LED on and off #include reg52.h. typedef unsigned char u8; typedef unsigned int u16; sbit key1=P3^2; sbit LED=P2^0; void delay(u16 i) { while(i--);...[Details]
Thanks to its rich music library and simple user interface, Spotify has become one of the most popular music streaming services in the world. However, with the rapid expansion of its user base, s...[Details]
The antenna is the eye of the radar level meter, and the shape of the antenna must be suitable for the physical characteristics of electromagnetic waves. The shape of the antenna determines the foc...[Details]
On November 6, international research organization SNE Research released the latest data on global
electric vehicle
battery
usage from January to September 2024. The data showed that ...[Details]
Talking
京公网安备 11010802033920号
EEWORLD
