85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Potentiometer Specifications
Initial Electrical Characteristics
1
Conductive Plastic Element
Cermet Element
Standard Resistance Range
Linear Tapers (A, B, E, & H) ..................................................................(B & E) 1 K ohms to 1 megohm ............. (A & H) 100 ohms to 1 megohm
Audio Tapers (C, D, F, G, S, & T) .........................................................(D, G, S, & T) 1 K ohms to 1 megohm ... (C & F) 1 K ohms to 1 megohm
Total Resistance Tolerance .........................................................................±20 % or 10 % ...................................... ±10 % or 5 %
Absolute Minimum Resistance ...................................................................2 ohms maximum .................................. 2 ohms maximum
Operating Temperature Range ...................................................................-40 °C to +125 °C.................................. -40 °C to +125 °C
Storage Temperature Range ......................................................................-55 °C to +125 °C.................................. -55 °C to +125 °C
Temperature Coefficient Over Storage Temperature Range ......................±1,000 ppm/°C ...................................... ±150 ppm/°C
Vibration (Single Section) ...........................................................................15 G ....................................................... 15 G
Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum
Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum
Shock (Single Section) ...............................................................................30 G ....................................................... 30 G
Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum
Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum
Total Resistance Shift ...........................................................................±10 % maximum ................................... ±5 % maximum
Rotational Life (No Load) ............................................................................100,000 cycles ...................................... 100,000 cycles
Total Resistance Shift ...........................................................................(Linear taper) 10 ohms or ..................... (All tapers) ±5 % TRS maximum
Moisture Resistance (MIL-STD-202, Method 103, Condition B)
Total Resistance Shift ...........................................................................(B & E tapers) ±10 % maximum ........... ±5 % maximum (all tapers)
IP Rating .....................................................................................................IP 40 ...................................................... IP 40
Starting and Running Torque (Non-Locking Bushings)
Single Section ................................................................................................................................................................. 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Dual Section .................................................................................................................................................................... 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Triple Section ................................................................................................................................................................... 0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.)
Quadruple Section .......................................................................................................................................................... 0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.)
Starting and Running Torque (Locking Bushings) ..................................................................................................... 0.14 to 2.82 N-cm (0.2 to 4.0 oz.-in.)
Shaft Locking Torque with Locknut @ 10 in-lb. (B & E Bushings) ........................................................................................................ 14 N-cm (20 oz-in.)
Mounting ...................................................................................................................................................................1.7-2.0 N-m (15-18 lb.-in.) maximum
Weight (Single Section).............................................................................................................................................................................. 21 grams maximum
(Each Additional Section) ...................................................................................................................................................................... 6 grams maximum
Terminals .......................................................................................................................................................................... Printed circuit terminals or J-Hooks
Soldering Condition .................................................................. Recommended hand soldering using Sn95/Ag5 no clean solder, 0.025 ” wire diameter.
Maximum temperature 399 °C (750 °F) for 3 seconds. No wash process to be used with no clean flux.
Marking.......................................................................... Manufacturer’s trademark, wiring diagram, date code and resistance, manufacturer’s part number
Ganging (multiple section potentiometers) ..................................................................................................................................................... 4 cup maximum
Hardware ...........................................One lockwasher and one mounting nut is shipped with each potentiometer, except where noted in the part number.
For dimensional drawings see pages 3 & 4.
For ordering information see page 5.
NOTE: Model 81/82 performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications
81/82 - 5/8 ” Square Single-Turn Panel Control
85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Rotary Switch Specifications
Initial Electrical Characteristics
1
Contacts:
DPST ...............................................................................................................................................................................N.O/N.O.,N.C./N.C. or N.O./N.C.
DPDT ................................................................................................................................................................................2 N.O./N.C. (break before make)
Power Rating (Resistive Load):
DPST ............................................................................................................ 2 A @ 125 volts RMS-60 Hz or 2 A @ 28 VDC, 1 A @ 250 volts RMS-60 Hz
DPDT ........................................................................................................................................................... 1 A @ 125 volts RMS-60 Hz or 1 A @ 28 VDC
Operating Temperature Range ...........................................................................................................................................................................0 °C to +70 °C
Storage Temperature Range ........................................................................................................................................................................ -65 °C to +125 °C
Vibration (Dual Section) ....................................................................................................................................................................................................... 8 G
(Triple Section) .................................................................................................................................................................................................... 5 G
(Quadruple Section) ........................................................................................................................................................................................... 3 G
Contact Resistance ........................................................................................................................................................................ 10 milliohms maximum
Contact Bounce ......................................................................................................................................................................... 0.1 millisecond maximum
Shock (Dual Section) ......................................................................................................................................................................................................... 20 G
(Triple Section) ...................................................................................................................................................................................................... 15 G
(Quadruple Section) ............................................................................................................................................................................................. 10 G
Contact Resistance ........................................................................................................................................................................ 10 milliohms maximum
Contact Bounce ......................................................................................................................................................................... 0.1 millisecond maximum
Rotational Life ..................................................................................................................................................................................................... 25,000 cycles
Switch Actuating Torque (50% Duty cycle @ Rated Power Load) .................................................................................. 1.41 to 4.94 N-cm (2 to 7 oz.-in.)
Contact Resistance ...................................................................................................................................................................... 100 milliohms maximum
Moisture Resistance (MIL-STD-202, Method 106, Condition B)
Contact Resistance (0.1 VDC-10 mA) ............................................................................................................................................ 10 milliohms maximum
Switch Housing Material ................................................................................................................. High temperature, flame retardant, thermosetting plastic
Mechanical Characteristics
1
Actuating Torque (Each Section, Switch Module Only) ....................................................................................................... 3.53 to 10.6 N-cm (5 to 15 oz.-in.)
Running Torque (Out of Detent, 2-4 Module Assembly)..................................................................................................... 0.21 to 1.41 N-cm (0.3 to 2 oz.-in.)
Detent ..................................................................................................................................................................................................... CW or CCW standard
Contact Materials ..........................................................................................................................................................................Fine silver with gold overlay
Terminal Styles .................................................................................................................................................................................................. Solder lug only
Standard Orientation ..............................................................................................................................................................In-line with control terminals
Optional .......................................................................................................................................................................... Rotated 90 ° CCW from standard
Terminal Strength (Before and After Soldering Heat Exposure) .......................................................................................................... 0.9 Kg (2 lbs.) minimum
NOTE: Model 81/82 performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications
Due to demand issues, I have recently been looking for a suitable 12V 60Ah or larger capacity lithium battery to power my equipment. However, most of the products I searched for are batteries for outd...
Event details: [National Technology's new M4F core N32G430 is here~]Updated to 2022-10-25Evaluation report summary:@meiyao【National Technology N32G430】Review ~ LED flashing and key switch LED/using AD...
This is a reference circuit in the data sheet. It feels like high-frequency compensation, but I can't explain the reason. Please take a look at what the CF2 compensation principle is. (6228GBW is 730M...
[i=s]This post was last edited by Plakatu on 2022-4-22 14:05[/i]As shown in the figure above, because the position number is too long, I relabeled Q1, Q2, R1, and C1 for easy analysis.
The problem is ...
The top ten technologies are 5G, blockchain, foldable screen mobile phones, the evolution of artificial intelligence assistants, smarter and more flexible robots, flying cars, quantum computers, custo...
Using programmable devices CPLD/FPGA to implement VGA color display controller has many practical applications in industrial sites. By using hardware description language VHDL to design and simulate p...[Details]
In C51, how to embed assembly language programs? How to process and implement mixed programming?
A: The method is to use the compilation control instructions "#pragma src", "#pragma asm" and "#prag...[Details]
The second episode mainly analyzes the five interactive technologies behind the smart cockpit. These five interactive technologies contain five technical systems and supply chains. I hope it can give...[Details]
IU86751E is a 2x28W stereo; in the case of monophonic use; it can output up to 50W of high-efficiency Class D audio power amplifier circuit. Advanced EMI suppression technology allows the use of ch...[Details]
U.S. e-cigarette giant Juul Labs plans to lay off about 500 employees by the end of the year, according to people familiar with the matter. The troubled company is reversing its previous rapid expans...[Details]
Frequently Asked Questions about Ultrasonic Flow Meters
Q
: The installation conditions are met, the pipeline is new, and the material is good, so why can't I receive a signal?
A: Confirm whet...[Details]
Nowadays, lithium batteries have become an indispensable device in daily life and have been applied in many fields, such as mobile phones, electric vehicles , satellites, spacecraft, underwater robot...[Details]
*/ /* 1. This program does not use any assembly instructions 2. Timer T0 generates an interrupt to switch the process 3. Due to interruption or calling subroutine, PC stack is needed, so PC can be fo...[Details]
Just imagine, if 7 out of 10 people with jobs were fired tomorrow, what would they do?
It’s hard to imagine what the economy would look like if more than half the workforce was laid off, but let’...[Details]
Apple today released the iOS 14.3/iPadOS 14.3 RC candidate version, the specific version number is 18C65, which is now available for download to developers and public beta users. IT Home le...[Details]
PIC32MZ has up to 9 timer groups, but not all of them can be used simultaneously at any time, which is mainly a problem when using 32-bit counters. Timer 2, 4, 6, and 8 support 16-bit and 32-bit ti...[Details]
The battle between Waymo (the self-driving company under Google's parent company Alphabet) and Uber finally came to an end last week, and the two sides finally reached a settlement. Let's follow t...[Details]
1. Introduction
Resistance furnaces are widely used in chemical, metallurgical and other industries, so temperature control is of great significance in industrial production and scientific res...[Details]
Grenoble, France, November 5, 2024 -
Jolt Capital, a European growth-focused deep tech company, announced today that it has acquired the power management and signal processing IP business (the ...[Details]
Power technology
京公网安备 11010802033920号
EEWORLD
