.100" and .100" x .100", .093" Mating Length, Straight, Solder Tails
• Low profile for close board stacking
• Solder stand-offs to facilitate production wave solder
and board cleaning
• Board pin retention feature available
• See the Regulatory Information Appendix (RIA) in the
"RoHS Compliance" section of www.3Mconnectors.com
for compliance information.
929 Series
Date Modified: February 3, 2012
TS-0816-B
Sheet 1 of 2
Physical
Insulation:
Flammability: UL 94V-0
Material: Glass Filled Polyester (PBT) or PCT
Color: Black
Contact:
Wiping Area & Solder Tails: See ordering information
Underplating: 50 μ [ 1.27 μm ] Nickel
Plating:
Material: Copper Alloy
Marking:
None
Electrical
Current Rating:
2.5 A
Insulation Resistance:
> 5 × 10
9
Ω
at 500 V
DC
Withstanding Voltage:
1500 V
RMS
at Sea Level
Environmental
Temperature Rating:
-40°C to +105°C
Process Rating:
PCT Insulator: 260°C per J-STD-020
Moisture Sensitivity Level:
1 (per J-STD-020C) for PCT insulator only
UL File No.: E68080
PBT Insulator: Maximum insulator temperature 191°C for solder wave process only
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
Pin Strip Header
.100" and .100" x .100", .093" Mating Length, Straight, Solder Tails
A
( See Note )
.215 Ref
[5.46]
929 Series
A
( See Note )
.115 [2.92]
2X .05 Max
[1.27]
.093 + .008
-.003
0.013
0.056
.100 [2.54]
.015 [0.38]
.110 +.015
-.010
.100 Typ [2.54]
.025
±
.001 Sq Typ
[0.64]
.110 +.015
-.010
.100
±
.003
[2.54]
.100
±
.003
[ 2.54 ]
.100
±
.003
[2.54]
Ο
Ο
.040
±
.003 After Plating
[1.02]
.040
±
.003 After Plating
[ 1.02 ]
C
mm
[Inch]
Tolerance Unless Noted
.0
mm
±.1
.00
±.01
.000
±.005
Recommended Hole Pattern
Note:
A = .10" [2.5] × pin quantity per row. Dimension A is a maximum when the pin strip is cut to length, not when the strip is
broken to length. 2 row parts not recommended to be broken to length.
[ ] Dimensions for Reference Only
Ordering Information
Tin
9X9800-01-XX-XX
Pin Quantity
(01-36)
Plating Suffix:
blank = 100 μ" [2.54 µm] tin-lead,
PBT insulator (RIA E3 & C2 apply)
RK = 200 μ" [5 μm] matte tin,
PCT insulator (RIA E1 & C1 apply)
9X98XX-01-XX-XX
05 = 1 row
15 = 2 row
Board Retention Feature
2 = None
R = Kinked Tails
Gold Plating Suffix
I = 10 μ" [0.25 μm] all over, PBT insulator
(RIA E1 & C1 apply)
EU = 10 μ" [0.25 µm] all over, PCT insulator
(RIA E1 & C1 apply)
Pin Quantity per row
(01-36)
([02-72] ÷ 2)
TS-0816-B
Sheet 2 of 2
Gold
Board Retention Feature
2 = None
R = Kinked Tails
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase.
3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product.
Except
where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of
[i=s]This post was last edited by dcexpert on 2020-2-17 15:48[/i]After writing the new firmware, you can experience the LCD and touch screen. The large screen with touch function is a major feature of...
Yesterday, I used STM32CubeMX to plan the pins of STM32F407VGTx. This chip is LQFP100. The main functions used are ENTHERNET (MAC), FSMC and three serial ports. FSMC is used to operate the RA8875 cont...
Statistical Machine Learning : https://training.eeworld.com.cn/course/4860Statistical learning is a science that uses computers to build probabilistic statistical models based on data and use the mode...
[i=s]This post was last edited by fish001 on 2019-3-19 21:56[/i] [color=#000000][backcolor=white][size=4]FIFO: The data received by FIFO is read from SCIRXBUF, and the pointer of the receiving FIFO mo...
Award-winning live broadcast: Comprehensive explanation of TI MSP Academy tutorials. Registration is open~Click here to registerLive broadcast time
Thursday, September 9, 10:00-11:30amLive Topic
A com...
The Dragon Boat Festival is on June 25th. Where do you plan to go during the three-day holiday?
Happy holidays to everyone in advance! Feel free to share your holiday plans in the comments below.For t...
This paper introduces a novel design method for miniaturized RF transceiver front-end. This method is used to realize an L-band dual-band RF transceiver front-end on an LTCC substrate. The circuit si...[Details]
Pickering Interfaces' BRIC module places many relays in a very dense format. The BRIC module only uses the left-hand slot on the PXI backplane, and to power the module, it can use the other free slots...[Details]
Traffic lights are simulated by using the control diode and digital tube display of the 51 single-chip microcomputer. The system crystal oscillator is 11.0592MHZ. The red light in the east-west direct...[Details]
With the development of microelectronics manufacturing, it is urgent to make high-speed and highly integrated CMOS circuits, which has prompted the process level of analog integrated circuits to re...[Details]
The wheeled car is the main part of the mechanical structure of the smart car, which consists of structural components such as the body, wheels, transmission, and drive shaft. The wheeled car also ...[Details]
Traditional power monitoring systems mostly use wired connections. When there are many monitoring nodes, there are problems such as difficult installation, cumbersome wiring and inconvenient maint...[Details]
In the home furnishing market, the trend of smart home has been blowing for a long time, but the final model has always been "pending". In the future, how will the smart home market develop? Various ...[Details]
On December 5, 2019, the completion ceremony of BEST Jiangsu Technology Co., Ltd. (hereinafter referred to as BEST), a joint venture of Beijing Automotive Group Co., Ltd. (hereinafter referred to a...[Details]
BEIJING, China – October 17, 2022 – Analog Devices, Inc (Nasdaq: ADI) and Keysight Technologies, Inc. have announced a collaboration to accelerate the adoption and deployment of phased array techno...[Details]
Magnetic flap level gauge is a widely used liquid level measuring instrument in industrial production. So, in practical applications, how does the magnetic flap level gauge work and what are its fu...[Details]
1. SD card boot As the name implies, the boot code is stored in the SD card, and the device boots from the SD card. There are some advantages to booting from an SD card: for example, you can flash th...[Details]
The program counter PC is used to control the execution order of instructions. Its width determines the range that can be directly addressed. When the PIC microcontroller core is designed, the PC...[Details]
The watchdog timer (Watchdog Timer (WDT_A)) is actually a special timer, which can be used as a watchdog or a timer.
The so-called watchdog function refers to the ability to monitor whether the progr...[Details]
The ultra-low power consumption, highly integrated analog front-end chip MAX5865 is designed for portable communication devices (such as mobile phones, PDAs, WLANs, and 3G wireless terminals). The ...[Details]