Please read rating and
!CAUTION
(for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!Note
•Please read rating and
!CAUTION
(for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
•This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specifications before ordering. product specifications before ordering.
This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the approval sheet for
T13E9.pdf 04.6.15
Ceramic Trimmer Capacitors
TZB4 Series
0.6±0.1 Depth 0.5
1.4±0.1 dia.
2.4±0.1
s
Applications
1. Car audio systems
2. Cordless telephones
3. Hybrid ICs
4. Pagers
5. Remote keyless entry systems
6. Tuner packs
7. Surveillance cameras
8. DVD
9. Burglarproof devices
4.5±0.2
4.0±0.2
1. Miniature rectangular shape:
4.0(W)x4.5(L)x3.0(H)mm
2. Color coded case facilitates identification of
capacitance range.
3. Designed for automatic placement in surface mount
applications.
4. Designed to withstand flux baths and solder baths
(with cover film type)
5. Can be temporarily attached to PCB with adhesives
(Terminal style A and B)
6. Can be reflow and flow (with cover film type)
soldering method
7. Stable characteristics over a wide frequency range
(Resonant frequency: 1000MHz min. / 6pF)
4.5±0.2
3.0±0.2
2.7±0.3
1.2±0.1
A Type
5.0
Tolerance:
±0.5
in mm
0.6±0.1 Depth 0.5
1.4±0.1 dia.
4.0±0.2
2.4±0.1
s
Features
1.2±0.1
B Type
7.0
Tolerance:
±0.5
in mm
0.6±0.1 Depth 0.5
1.4±0.1 dia.
2.4±0.1
4.5±0.2
3.0±0.2
4.0±0.2
3.0±0.2
7
0.8±0.1
Tolerance:
±0.5
in mm
C Type
5.0
6.2
0.6±0.1 Depth 0.5
1.4±0.1 dia.
0.6±0.1 Depth 0.5
2.4±0.1
4.5±0.2
7.0
4.8
0.8±0.1
2.5
4.5±0.2
6.2
1.0
5.0
2.5±0.2
2.4±0.1
4.0±0.2
2.0±0.2
0.8±0.1
4.0±0.2
4.0±0.2
3.0±0.2
Tolerance:
±0.5
in mm
D Type
Tolerance:
±0.5
in mm
3.0±0.2
3.5±0.2
4.5
E Type
29
Please read rating and
!CAUTION
(for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!Note
•Please read rating and
!CAUTION
(for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
•This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specifications before ordering. product specifications before ordering.
This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the approval sheet for
T13E9.pdf 04.6.15
s
Notice (Storage and operating condition)
1. Do not use the trimmer capacitor under atmosphere
of RTV silicone rubber (Room Temperature
Vulcanizing Silicone Rubber) except Acetone
liberating silicone sealant.
2. Before using trimmer capacitor, please store under
the condition of -10 to +40 degree C and 30 to
85%RH.
3. Do not store in or near corrosive gasses.
4. Use within 6 months of deliverly.
5. Do not store under direct sunlight.
6. Do not use the trimmer capacitor under the
conditions listed below.
(1) Corrosive gasses atmosphere
(ex. Chlorine gas, Hydrogen sulfide gas,
Ammonia gas, Sulfuric acid gas, Nitric oxide gas,
etc.)
(2) In liquid (ex. water, oil, medical liquid,
organic solvent, etc.)
(3) Dusty / dirty atmosphere
(4) Direct sunlight
(5) Static voltage nor electric/magnetic fields
(6) Direct sea breeze
(7) Other variations of the above
s
Notice (Soldering and mounting)
1. Soldering
(1) Can be soldered by reflow soldering method, flow
soldering method, and soldering iron.
(2) Standard soldering condition
(a) Reflow soldering: Refer to the standard
temperature profile.
*Available for terminal shape A, B, and E.
(b) Flow soldering: Refer to the standard
temperature profile.
> Immerse the body in solder bath
- Available for cover film type
> Only immerse the terminal in solder bath
- Availabe for terminal shape C and D.
(c) Soldering iron:
> Temperature of tip
260+-10 degree C
> Soldering time
3 sec. max.
> Diameter
3mm max.
> Wattage of iron
30W max.
Before using other soldering conditions than
those listed above, please consult with Murata
factory representative prior to using. If the
soldering conditions are not suitable, e.g.,
excessive time and/or excessive temperature, the
trimmer capacitor may deviate from the specified
characteristics.
(3) The amount of solder is critical.
(4) The thickness of solder paste should be printed
from 150 micro m to 200 micro m and the dimension
of land pattern should be Murata's standard land
pattern used at reflow soldering. Insufficient
amounts of solder can lead to insufficient
soldering strength on PCB. Excessive amounts of
solder may cause bridging between the terminals
or contact failure due to flux wicking up.
(5) When using soldering iron, the string solder
shall be applied to the lower part of the
terminal only. Do not apply flux except to the
terminals. Excessive amounts of solder and/or
applying solder to the upper part of the
terminal may cause fixed rotor or contact failure
due to flux invasion into the movable part and/or
the contact point. The soldering iron should not
come in contact with the plastic case of the
trimmer capacitor. If such contact does occur,
the trimmer capacitor may be damaged.
(6) Our recommendable chlorine content of solder is
as follows.
(a) Solder paste: 0.2wt% max.
(b) String solder: 0.5wt% max.
(7) Do not use water-soluble flux (for water
cleaning). To prevent the deterioration of
trimmer capacitor characteristics, apply flux
only to terminals.
2. Mounting
(1) Do not apply excessive force (preferable 5.0N
(Ref.; 500gf) max.), when the trimmer capacitor
is mounted on the PCB.
(2) Do not warp and/or bend PCB to prevent trimmer
capacitor from breakage.
(3) Use the suitable PCB holes which are the same
pitch as the terminal of the trimmer capacitor.
If it would not fit with the terminal, the
excessive stress would be applied to the
terminal and the trimmer capacitor may deviate
from the specified characteristics (Terminal
shape C and D).
(4) Do not apply bending stress more than 10.0N
(Ref.; 1kgf) after the trimmer capacitor has
been mounted on the PCB (Terminal shape C and D).
(5) Mount trimmer capacitor in contact with PCB
(Terminal shape C and D).
(6) In case of bending the terminals, do not apply
excessive force to the body of the product and
prevent the terminal fixing part from damaging.
(7) Use the suitable dimension of the pick-up nozzle.
> Without cover film type
- External dimensions of 4.5x4.0mm and
2.5mm bore diameter.
> With cover film type
- 4.0mm external diameter and 2.0mm bore
diameter.
3. Cleaning [with cover film type]
(1) Isopropyl alcohol and Ethyl alcohol are
available material for cleaning. Water group
material like Pinealpha, Cleanthru can not be
used. For other materials, please consult with
Continued on the following page.
7
33
FPGA/CPLD
京公网安备 11010802033920号
EEWORLD
