-
Input voltage: The input voltage of the instrument is generally marked at the power interface. Temperature: Generally, the operating temperature of the instrument is between 10℃ and +40℃. Some inst...[Details]
-
Never take a step back in the face of difficulties, only add excitement to victory. Since the outbreak of the COVID-19 epidemic, State Grid Hunan Electric Power Co., Ltd. has insisted on keeping it...[Details]
-
The growing demand for portable electronic devices, electric vehicles , and large-scale smart grids has driven the rapid development of energy storage technology. Lithium-sulfur batteries are conside...[Details]
-
On December 2, Zhongjing Electronics stated on the interactive platform that the company's e-cigarette application products currently maintain a stable supply trend. In addition, the company's Wi-Fi6...[Details]
-
1 Introduction
The Inter-Integrated Circuit (IIC) bus is a bus used to connect microcontrollers and their peripheral devices.
The main advantages of the bus are its simplicity and effecti...[Details]
-
As shown in Figure 4-2, the input stage of this power amplifier is a pair of field effect tubes, which have the advantages of high input impedance, large dynamic range and low noise. VT3 and VT4...[Details]
-
With the development of the automobile industry, more and more automotive electronic components are being used in modern automobiles, providing better safety, comfort and economy for automobiles. I...[Details]
-
1. Introduction
The power module of the motor controller, namely the IGBT device and the freewheeling diode, will generate losses during switching and conducting current. The lost energy will ...[Details]
-
Wingtech Technology issued an announcement disclosing the progress of its acquisition of 100% equity and related operating assets of Guangzhou Delta Imaging Technology Co., Ltd. It was mentioned th...[Details]
-
We have talked a lot about some technologies and concepts related to autonomous driving before, but most of them are discussions centered around intelligent driving. There is one concept that has not...[Details]
-
1. Circuit composition
When more
LED
products are needed, if all LEDs are connected in series,
the LED driver
will need
to output a higher voltage; if all LEDs are c...[Details]
-
Beijing, October 26, 2024 /PRNewswire/ -- On October 24, CATL launched the world's first hybrid battery with a pure electric range of more than 400 kilometers and 4C supercharging in Beijing - the ...[Details]
-
(1) Hardware CLK---PA4, DAT--- PA5, RST--- PA6 (2) Hardware initialization CLK and RST are both outputs, and DAT is an open-drain output. Because in this mode, the reading of the IO port still exist...[Details]
-
In recent years, remote work and online collaboration have become the new normal for more and more companies. At the same time, the trend of "cloud SOHO" (Small Office, Home Office) has become increa...[Details]
-
In the last EV Focus column, we talked about why electric vehicles need to use 800V, and also roughly understood the relationship between SiC and 800V. In this issue, we will zoom in and talk about...[Details]
NXP MCU
京公网安备 11010802033920号
EEWORLD