ATC, the industry leader, is announcing new improved ESR/ESL
performance for the 700 B Series RF/Microwave Capacitors. The
superior high self-resonance and zero TCC characteristic of this Series pro-
TEMPERATURE COEFFICIENT OF CAPACITANCE (TCC):
vide excellent performance over a broad range of RF and microwave appli- 0 ±30 PPM/°C (-55°C to +125°C)
cations requiring minimum drift, including RF power. Porcelain and ceramic
INSULATION RESISTANCE (IR):
construction provide a rugged, hermetic package.
0.1 pF to 470 pF:
ATC offers an encapsulation option for applications requiring extended pro-
10
6
Megohms min. @ +25°C at rated WVDC.
tection against arc-over and corona.
10
5
Megohms min. @ +125°C at rated WVDC.
510 pF to 5100 pF:
Typical functional applications: Bypass, Coupling, Tuning and DC Blocking.
10
5
Megohms min. @ +25°C at rated WVDC.
Typical circuit applications: Filters, Oscillators, Timing and RF Power
10
4
Megohms min. @ +125°C at rated WVDC.
Amplifiers.
WORKING VOLTAGE (WVDC):
See Capacitance Values Table, page 2.
*For leaded styles only.
ENVIRONMENTAL TESTS
ATC 700 B Series Capacitors are designed and manufactured to meet and
exceed the requirements of EIA-198, MIL-PRF-55681 and MIL-PRF-123.
DIELECTRIC WITHSTANDING VOLTAGE (DWV):
250% of WVDC for capacitors rated at 500 volts DC or less for 5 seconds.
150% of WVDC for capacitors rated at 1250 volts DC or less for 5 seconds.
120% of WVDC for capacitors rated above 1250 volts DC for 5 seconds.
THERMAL SHOCK:
MIL-STD-202, Method 107, Condition A.
RETRACE:
Less than ±(0.02% or 0.02 pF), whichever is greater.
AGING EFFECTS:
None
PIEZOELECTRIC EFFECTS:
None
(No capacitance variation with voltage or pressure).
MOISTURE RESISTANCE:
MIL-STD-202, Method 106.
LOW VOLTAGE HUMIDITY:
MIL-STD-202, Method 103, Condition A, with 1.5 Volts DC applied while
subjected to an environment of 85°C with 85% relative humidity for 240
hours min.
CAPACITANCE DRIFT:
±(0.02% or 0.02 pF), whichever is greater.
OPERATING TEMPERATURE RANGE:
0.1 to 5100 pF: from -55°C to +125°C (No derating of working voltage)
LIFE TEST:
MIL-STD-202, Method 108, for 2000 hours, at 125°C.
200% WVDC applied.
Voltage Applied:
TERMINATION STYLES:
Available in various surface mount and leaded styles.
See Mechanical Configurations, page 3.
200% of WVDC for capacitors rated at 500 volts DC or less.
120% of WVDC for capacitors rated at 1250 volts DC or less.
100% of WVDC for capacitors rated above 1250 volts DC.
TERMINAL STRENGTH:
Terminations for chips and pellets withstand a
pull of 5 lbs. min., 15 lbs. typical, for 5 seconds in direction perpendicular to
the termination surface of the capacitor. Test per MIL-STD-202, method 211.
ATC # 001-814 Rev. O 3/10
ATC 700 B Capacitance Values
CAP. CAP.
CODE (pF)
0R1
0R2
0R3
0R4
0R5
0R6
0R7
0R8
0R9
1R0
1R1
1R2
1R3
1R4
1R5
1R6
1R7
1R8
1R9
2R0
2R1
2R2
2R4
2R7
3R0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.4
2.7
3.0
TOL.
B
RATED WVDC CAP. CAP.
STD.
EXT. CODE (pF)
3R3
3R6
3R9
4R3
4R7
5R1
5R6
6R2
6R8
7R5
8R2
9R1
100
110
120
130
150
160
180
200
220
240
270
300
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
13
15
16
18
20
22
24
27
30
TOL.
RATED WVDC CAP. CAP.
STD.
EXT. CODE (pF)
330
360
390
430
470
510
560
620
680
750
820
910
101
111
121
131
151
161
181
201
221
241
271
301
33
36
39
43
47
51
56
62
68
75
82
91
100
110
120
130
150
160
180
200
220
240
270
300
TOL.
RATED WVDC CAP. CAP.
STD.
EXT. CODE (pF)
331
361
391
431
471
511
561
621
681
751
821
911
102
112
122
152
182
222
272
302
332
392
472
512
VOLT
TOL.
RATED WVDC
STD.
EXT.
B, C
1500
EXT
B, C, D
500
B, C, J
K, M
500
EXTENDED VOLTAGE
EXTENDED VOLTAGE
300
F, G, J,
K, M
EXTENDED
B, C, D 500
1500
1500
F, G, J
K, M
1000
200
N/A
330
360
390
430
470
510
560
620
680
750
820
910
F, G, J
1000
1100 K, M
1200
1500
1800
2200
2700
3000
3300
3900
4700
5100
EXTENDED VOLTAGE
EXTENDED VOLTAGE
200
100
VOLTAGE
N/A
50
VRMS = 0.707 x WVDC
• SPECIAL VALUES, TOLERANCES, HIGHER WVDC AND MATCHING AVAILABLE. • ENCAPSULATION OPTION AVAILABLE. PLEASE CONSULT FACTORY.
Capacitance values in
bold
type indicate porcelain dielectric. All other capacitance values indicate ceramic dielectric.
All 700 B Capacitors are available laser marked with ATC's identification, capacitance code and tolerance.
NOTE: EXTENDED WVDC DOES NOT APPLY TO CDR PRODUCTS.
ATC PART NUMBER CODE
ATC700 B 33 1 J W 500 X
Series
Case Size
Capacitance Code:
First 2 significant digits for capacitance.
R=Decimal Point
Indicates number of zeros following digits
of capacitance in picofarads except for decimal values.
Capacitance Tolerance
C
Packaging
T - Tape and Reel, 1000 pc. qty.*
TV - Vertical Orientation of Product,
Tape and Reel, 1000 pc. qty.*
C - ATC Cap-Pac
®
, 100 pc. qty. std.*
I - Special Packaging. Consult Factory.
*
Consult ATC for other quantities
Laser Marking
WVDC
Termination Code
CAPACITANCE TOLERANCE
Code
Tol.
B
C
D
F
±1%
G
±2%
J
K
M
±0.1 pF ±0.25 pF ±0.5 pF
±5% ±10% ±20%
The above part number refers to a 700 B Series (case size B) 330 pF capacitor,
J tolerance (±5%), 500 WVDC, with W termination (Tin/Lead, Solder Plated over Nickel Barrier), laser marking and ATC Cap-Pac
®
packaging.
ATC accepts orders for our parts using designations
with
or
without
the
“ATC” prefix. Both methods of defining the part number are equivalent, i.e.,
part numbers referenced with the “ATC” prefix are interchangeable to parts
referenced without the “ATC” prefix. Customers are free to use either in spec-
ifying or procuring parts from American Technical Ceramics.
For additional information and catalogs contact your ATC
representative or call direct at (+1-631) 622-4700.
Consult factory for additional performance data.
C E R A M I C S
ATC Asia
+86-755-2396-8759 • sales@atceramics-asia.com
A M E R I C A N
2
ATC North America
+1-631-622-4700 • sales@atceramics.com
T E C H N I C A L
ATC Europe
+46 8 6800410 • sales@atceramics-europe.com
w
w
w
.
a
t
c
e
r
a
m
i
c
s
.
c
o
m
ATC 700 B Capacitors: Mechanical Configurations
ATC
SERIES
& CASE
SIZE
ATC
TERM.
CODE
OUTLINES
MIL-PRF-
55681
CASE SIZE
& TYPE
W/T IS A
TERMINATION SURFACE
Y
BODY DIMENSIONS
INCHES (mm)
LENGTH
(L)
.110
+.020 -.010
(2.79
+0.51 -0.25)
.110
+.035 -.010
(2.79
+0.89 -0.25)
.110
+.020 -.010
(2.79
+0.51 -0.25)
.110
+.020 -.010
(2.79
+0.51 -0.25)
TL
W
LEAD AND TERMINATION
DIMENSIONS AND MATERIALS
OVERLAP
(Y)
MATERIALS
WIDTH
(W)
THICKNESS
(T)
700B
W
CDR14BP
B
Solder Plate
Y
W
L
T
.110 ±.015
(2.79 ±0.38)
Tin /Lead, Solder Plated over
Nickel Barrier Termination
700B
P
CDR14BP
B
Pellet
Y
L
W
T
.110 ±.015
(2.79 ±0.38)
.102 (2.59)
max.
.110 ±.015
(2.79 ±0.38)
.015 (0.38)
±.010 (0.25)
Heavy Tin/Lead Coated,
over Nickel Barrier Termination
700B
T
N/A
B
RoHS Compliant
Tin Plated over
Nickel Barrier Termination
Solderable
Nickel Barrier
Y
W
L
T
700B
CA
CDR13BP
B
Gold Chip
W
L
T
.110 ±.015
(2.79 ±0.38)
RoHS Compliant
Gold Plated over
Nickel Barrier Termination
Length
( LL )
Width
( WL )
Thickness
( TL )
700B
MS
CDR21BP
B
WL
LL
.120 (3.05)
max.
Microstrip
B
WL
L
T
TL
700B
AR
CDR22BP
LL
W
L
T
.135 ±.015
(3.43 ±0.38)
Axial Ribbon
.250
(6.35) min.
.093 ±.005 .004 ±.001
(2.36
(.102
±0.13)
±.025)
LL
700B
RR
CDR24BP
B
Radial Ribbon
W
L
T
WL
.110 ±.015
(2.79 ±0.38
.102 (2.59)
max.
N/A
LL
700B
RW
CDR23BP
B
Radial Wire
T
L
W
.145 ±.020
(3.68 ±0.51)
LL
.500
(12.7) min.
#26 AWG.,
.016 (.406) dia.
nominal
700B
AW
CDR25BP
B
Axial Wire
L
W
T
Additional lead styles available: Narrow Microstrip (NM), Narrow Axial Ribbon (NA) and Vertical Narrow Microstrip (H). Other lead lengths are available; consult factory.
All leads are high purity silver attached with high temperature solder and are
RoHS
compliant. For a complete military catalog, request American Technical Ceramics
document ATC 001-818.
A M E R I C A N
ATC North America
+1-631-622-4700 • sales@atceramics.com
T E C H N I C A L
ATC Europe
+46 8 6800410 • sales@atceramics-europe.com
C E R A M I C S
ATC Asia
+86-755-2396-8759 • sales@atceramics-asia.com
3
w
w
w
.
a
t
c
e
r
a
m
i
c
s
.
c
o
m
ATC 700 B Capacitors: Non-Magnetic Mechanical Configurations
*
ATC
SERIES
& CASE
SIZE
ATC
TERM.
CODE
OUTLINES
MIL-PRF-
55681
CASE SIZE
& TYPE
W/T IS A
TERMINATION SURFACE
Y
BODY DIMENSIONS
INCHES (mm)
LENGTH
(L)
.110
+.025 -.010
(2.79
+0.64 -0.25)
.110
+.035 -.010
(2.79
+0.89 -0.25)
.110
+.025 -.010
(2.79
+0.64 -0.25)
TL
W
LEAD AND TERMINATION
DIMENSIONS AND MATERIALS
OVERLAP
(Y)
MATERIALS
WIDTH
(W)
THICKNESS
(T)
700B
WN
Meets
Require-
ments
B
Non-Mag
Solder Plate
Y
W
L
T
.110 ±.015
(2.79 ±0.38)
Tin/Lead, Solder Plated over
Non-Magnetic Barrier
Termination
Heavy Tin/Lead Coated, over
Non-Magnetic Barrier
Termination
700B
PN
Meets
Require-
ments
B
Non-Mag
Pellet
B
Non-Mag
Y
W
L
T
.110 ±.015
(2.79 ±0.38)
.102 (2.59)
max.
.015 (0.38)
±.010 (0.25)
700B
TN
Meets
Require-
ments
RoHS Compliant
.110 ±.015
(2.79 ±0.38)
W
L
T
Solderable
Barrier
B
WL
Tin Plated over
Non-Magnetic Barrier
Termination
.120 (3.05)
max.
Length
( LL )
Width
( WL )
Thickness
( TL )
700B
MN
Meets
Require-
ments
LL
Non-Mag
Microstrip
B
LL
L
T
TL
700B
AN
Meets
Require-
ments
Non-Mag
Axial Ribbon
WL
L
T
W
.135 ±.015
(3.43 ±0.38)
.250
(6.35) min.
.110 ±.015
(2.79 ±0.38)
.106 (2.69)
max.
.093 ±.005 .004 ±.001
(2.36
(.102
±.025)
±0.13)
700B
FN
Meets
Require-
ments
LL
B
Non-Mag
Radial Ribbon
W
L
T
WL
N/A
700B
RN
Meets
Require-
ments
LL
B
Non-Mag
Radial Wire
T
L
W
.145 ±.020
(3.68 ±0.51)
LL
W
.500
(12.7) min.
700B
BN
Meets
Require-
ments
#26 AWG.,
.016 (.406) dia.
nominal
B
Non-Mag
Axial Wire
L
T
*Capacitors with values greater than 200 pF contain a trace magnetic element that may exhibit weak magnetic properties.
**Additional lead styles available: Narrow Microstrip (DN), Narrow Axial Ribbon (GN) and Vertical Narrow Microstrip (HN). Other lead lengths are available; consult factory;
All leads are high purity silver attached with high temperature solder and are
[Competition Details] 2020-2021 ON Semiconductor and Avnet IoT Creative Design CompetitionThank you very much for your support of this competition!The finalists were selected by ON Semiconductor, Avne...
EEWORLD社区onsemi and Avnet IoT Innovation Design Competition
Frequency Converter Principle and Application Harbin Institute of Technology : https://training.eeworld.com.cn/course/5997?This course is a teaching video of the high-quality course "Inverter Principl...
[color=#333333]Hello experts, has anyone used Semitec-103NT-4 (12-AS-029) high temperature thermistor? Please share the datasheet or temperature-impedance parameter table of this model. I really can't...
In order to complete the smart home system with jihuaLi, I transplanted this driver. No matter how it is written, it is necessary to summarize it.
NRF24L01 uses the SPI bus to communicate with the ho...[Details]
On the evening of November 28, Jinguan Co., Ltd. issued an announcement stating that on November 26, 2021, the company and China Overseas Narentai Energy Development (Beijing) Co., Ltd. (hereinafter ...[Details]
On January 15, local time, researchers at the Harvard John A. Paulson School of Engineering and Applied Sciences (SEAS) announced the development of a new lithium metal battery that charges and disch...[Details]
1. The smart home industry has a promising future Shortly after the beginning of 2014, the smart home industry had a bombshell news: on January 14, Beijing time, Google announced that it would a...[Details]
As we all know, Samsung has now launched four foldable screen models (Fold, Fold 2, Z Flip, W20). There have been many rumors that Samsung's next-generation foldable screen model (called Galaxy...[Details]
Use 358 to make an adder, through ADC0831 AD conversion, 51 single-chip microcomputer control, it can measure the voltage value from positive 2.5V to negative 2.5V. It can be expanded to measure larg...[Details]
WiMi Hologram Software Co., Ltd. (Nasdaq: WiMi) (hereinafter referred to as "WiMi Hologram" or "the Company"), a leading provider of holographic AR application technology, has obtained a patent for ...[Details]
Introduction:
With the rapid development of electronic technology, power consumption and energy saving have put forward new requirements for electronic technology. In terms of power electronics...[Details]
China Energy Storage Network News:
The Global Energy Interconnection Development Cooperation Organization recently signed a tripartite cooperation agreement with the Grid Administration of th...[Details]
stm32 pwm adopts two methods, one is fixed setting method, for example, setting the counter to 199 clk and the pulse width to 100 clk, the second method adopts DMA configuration pulse width method, fo...[Details]
On March 5, Lianchuang Electronics issued an announcement stating that due to operational and development needs, the company plans to introduce investor Nanchang Jiumu New Century Industrial Investme...[Details]
On the morning of November 25, Ming-Chi Kuo, an analyst who has been paying close attention to Apple, said that Apple plans to release other MacBook models using self-developed chips in the se...[Details]
On September 24, the 2023 World Intelligent and Connected Vehicles Conference and Exhibition, co-sponsored by the Ministry of Industry and Information Technology, the Ministry of Public Security, the...[Details]
1: First the Makefile.def:
————————————————————————————————————————
In all driver makefiles there is !INCLUDE $(_MAKEENVROOT)makefile.def
Find (_MAKEENVROOT) makefile.def where C:WIN...[Details]
onsemi and Avnet IoT Innovation Design Competition
京公网安备 11010802033920号
EEWORLD
