P5-114331 datasheet, PDF - EEWORLD Datasheet

Datasheet> All Categories > Mechanical and electronic products> switch> P5-114331

P5-114331: DescriptionPushbutton Switch, SPDT, Alternate, 10A, 28VDC, Solder Terminal, Panel Mount; CategoryMechanical and electronic products switch; File Size696KB，2 Pages; ManufacturerOTTO; Websitehttp://www.ottoexcellence.com

Download Datasheet Parametric View All

P5-114331 Overview

Pushbutton Switch, SPDT, Alternate, 10A, 28VDC, Solder Terminal, Panel Mount

P5-114331 Parametric

Parameter Name	Attribute value
Maker	OTTO
Reach Compliance Code	unknown
ECCN code	EAR99
Actuator color	RED
Actuator length	0.312 inch
Actuator material	THERMOPLASTIC
Actuator stroke	4.572 mm
Actuator type	PUSHBUTTON
Other features	RED, WATERPRF RED BEZ
body height	20.66 mm
Body length or diameter	15.82 mm
Contact (AC) maximum rated load I	5A@115VAC
Contact (AC) maximum rated R load	10A@115VAC
Maximum contact current (AC)	10 A
Maximum contact current (DC)	10 A
Contact (DC) maximum rated R load	10A@28VDC
Contact resistance	0.025 mΩ
Maximum contact voltage (AC)	115 V
Maximum contact voltage (DC)	28 V
Dielectric withstand voltage	1050VRMS V
Electrical life	25000 Cycle(s)
JESD-609 code	e4
Manufacturer's serial number	P5
Installation features	PANEL MOUNT
Maximum operating force	17.79 N
Maximum operating temperature	85 °C
Minimum operating temperature	-55 °C
seal	EPOXY TERMINAL SEALED; IP68
surface mount	NO
Switch action	ALTERNATE
switch function	SPDT
Switch type	PUSHBUTTON SWITCH
Terminal surface	GOLD/SILVER
Terminal length	0.156 inch
Terminal material	BRASS
Termination type	SOLDER

Preview

Download Datasheet

View All

ALTERNATE

ACTION

ALTERNATE ACTION PUSHBUTTONS

SEALED AGAINST DUST & MOISTURE

The P5 Alternate Action switches match the P1, P3 and P8

Momentary Action Pushbutton models for mixed function

with common panel appearance. Now you can design panels

with both alternate and momentary action switches and have

uniform panel appearance. The P5 features alternate action

in the same pushbutton and housing configuration as the

momentary P1 and P3 and as a bonus, the P5 requires less

behind the panel space than the P1 and P3 momentary versions.

Push and the P5 switch turns “on.” Push again and the P5 switch

turns “off.” Positive tactile feedback is featured so the operator

is clearly aware the switch mode has been executed. The button

returns to the original position after each actuation.

To guard against front panel splash and dirt, the P5 series

is sealed at the button with OTTO’s patented “rolling

sleeve”principle. The terminals are sealed with epoxy, providing

a seal against flux during wiring and behind panel dirt and

moisture. The combination of sealing provides smooth operation

over a wide temperature range. Watertight sealing to IP68S is

available.

A vandal resistant style is available in the P5-V series. Custom

housings, shrouded buttons, contact configurations and

materials are available to suit your application requirements. We

also provide custom button engraving with epoxy ink backfill,

watertight versions and other special characteristics.

, Push O

“Push On

ff” action

Style P5-4

Style P5-3

Style P5-6

Style P5-1

Standard Characteristics/Ratings:

ELECTRICAL RATINGS:

Load

Resistive

Inductive

Lamp

Motor

DWV

Low Level

Electrical Life:

Mechanical Life:

Seal:

Operating Force:

Total Travel:

Overtravel:

Sea Level @ 28VDC

or 115VAC, 60/400Hz

10A

1050Vrms

10mA @ 30mV

25,000 cycles

1,000,000 cycles

IP64 & MIL-PRF-8805 Design 2 or IP68S

3.0 lbs. +1/-0.5 lb.

0.180 inches max

0.012 inches min

Features:

• Button sealed with patented “rolling sleeve” principle

• Contact area sealed at case & terminals

• Moistureproof & dusttight to IP64 & MIL-PRF-8805

Design 2 or watertight to IP68S

• Less than 25mΩ contact resistance

• Handles low level up to 10 amps

• Variety of mounting styles

• Engraved buttons available

• Choice of 9 button & 3 bezel colors

• Panel appearance matches most other OTTO

momentary pushbutton switches

• Unsealed construction also available

• RoHS/WEEE/Reach compliant

Operating Temp Range:

-55°C to +85°C

MATERIALS:

Case:

Button:

Terminals:

Terminal Hardware:

Mounting Hardware:

Anodized aluminum alloy

Thermoplastic

Brass, silver plate or gold plate for low level

Terminal lugs, lockwasher and screw for screw terminal option

Hex nut, lockwasher and panel seal on watertight switches

119

OTTO Full Line Catalog

Specifications Subject To Change Without Notice

Recommended Resources

STK443 power amplifier circuit diagram

Transistor Dual Differential Input Stage

Human body sensor automatic alarm circuit

LED dimmer circuit

MOS to TTL driver

M50111P/AP/By/CF (VCR, TV and audio equipment) 30-function infrared remote control receiving circuit

USB OTG connection method: [size=4]1. Overview[/size] [size=4]OTG devices use the ID pin in the plug to distinguish A/B Devices. When the ID is grounded, it is called A-Device, acting as a USB Host. A-Device always provides pow...; Jacktang Analogue and Mixed Signal

Have you been affected by the price increase? Share the best pin-compatible alternative solution under the wave of price increase#, a certain brand?: Xinhai launches pin-compatible MCU, ADC, AFE Founded in 2003, Chipsea Technology is a full signal chain chip design company integrating perception, computing, control, and transmission. Its products i...; 天明 Domestic Chip Exchange

Request: DC-DC small package chip similar to LM2596: I am currently working on a device that is powered by 12V DC and needs to be converted to 5V. I am looking for a small package DC-DC chip similar to LM2596. I chose the TPS54302 chip, but look at the ...; bigbat Power technology

What is the reason! Another wind turbine fire accident! And caused a ground wildfire: [i=s]This post was last edited by qwqwqw2088 on 2022-10-26 10:35[/i]2022 is really an eventful year. Not only is the epidemic raging, but wind power accidents are also emerging one after another.As a ...; qwqwqw2088 Analogue and Mixed Signal

【Iprober 520 current probe】Practical use in motor control: Actual use of the probe This test mainly uses the I-Prober520 probe for actual testing, mainly for motor control. This time, the FOC motor control development board evaluated previously was used, and ...; gyp1 Test/Measurement

Can you please help me find out where is the problem with the program?: I want to use a state machine to make a PWM motor speed control, and use one button to set two functions.A short press within 1S turns the motor on or off, and a long press adjusts the speed by PWM. W...; 求学长 51mcu

Shortcut: 00 01 02 03 04 05 06 07 08 09 0A 0C 0F 0J 0L 0M 0R 0S 0T 0Z 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F 1H 1K 1M 1N 1P 1S 1T 1V 1X 1Z 20 21 22 23 24 25 26 27 28 29 2A 2B 2C 2D 2E 2F 2G 2K 2M 2N 2P 2Q 2R 2S 2T 2W 2Z 30 31 32 33 34 35 36 37 38 39 3A 3B 3C 3D 3E 3F 3G 3H 3J 3K 3L 3M 3N 3P 3R 3S 3T 3V 40 41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 4M 4N 4P 4S 4T 50 51 52 53 54 55 56 57 58 59 5A 5B 5C 5E 5G 5H 5K 5M 5N 5P 5S 5T 5V 60 61 62 63 64 65 66 67 68 69 6A 6C 6E 6F 6M 6N 6P 6R 6S 6T 70 71 72 73 74 75 76 77 78 79 7A 7B 7C 7M 7N 7P 7Q 7V 7W 7X 80 81 82 83 84 85 86 87 88 89 8A 8D 8E 8L 8N 8P 8S 8T 8W 8Y 8Z 90 91 92 93 94 95 96 97 98 99 9A 9B 9C 9D 9F 9G 9H 9L 9S 9T 9W

Popular Components