Inductors (Coils) > Chip Inductor for Automotive (Chip Coil for Automotive) > Power Inductor (Wire Wound Type for Choke)
Data Sheet
1
Chip Inductor for Automotive (Chip Coil for Automotive)
Power Inductor (Wire Wound Type for Choke)
LQH32C_23/LQH32C_33 Series (1210 Size)
c
Dimensions
LQH32C_23/LQH32C_33
2.5±0.2
2.5±0.2
Fig. 1
2.5±0.2
c
Packaging
Code
L
K
2.0±0.2
A
Packaging
180mm Embossed Tape
330mm Embossed Tape
Bulk(Bag)
Minimum Quantity
2000
7500
500
B
3.2±0.3
2.5±0.2
2.5±0.2
A: 2.8 max.
* Please refer to the dimention A for
LQH32CN_33 (2R2M, 4R7M, 100K)
types. (See Fig. 1)
0.9±0.3
1.3±0.2
0.9±0.3
(in mm)
c
Rated Value (p: packaging code)
Part Number
LQH32CH1R0M23p
LQH32CH2R2M23p
LQH32CH4R7M23p
LQH32CH100K23p
LQH32CH220K23p
LQH32CHR15M33p
LQH32CHR27M33p
LQH32CHR47M33p
LQH32CH1R0M33p
LQH32CH2R2M33p
LQH32CH4R7M33p
LQH32CH100K33p
Inductance
1.0µH ±20%
2.2µH ±20%
4.7µH ±20%
10µH ±10%
22µH ±10%
0.15µH ±20%
0.27µH ±20%
0.47µH ±20%
1.0µH ±20%
2.2µH ±20%
4.7µH ±20%
10µH ±10%
Test Frequency
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
Rated Current
800mA
600mA
450mA
300mA
250mA
1450mA
1250mA
1100mA
1000mA
790mA
650mA
450mA
DC Resistance
0.09ohm ±30%
0.13ohm ±30%
0.20ohm ±30%
0.44ohm ±30%
0.71ohm ±30%
0.028ohm ±30%
0.034ohm ±30%
0.042ohm ±30%
0.06ohm ±30%
0.097ohm ±30%
0.15ohm ±30%
0.30ohm ±30%
Self Resonance Frequency (min.)
96MHz
64MHz
43MHz
26MHz
19MHz
400MHz
250MHz
150MHz
100MHz
64MHz
43MHz
26MHz
Class of Magnetic Shield: No magnetic shield
Operating Temperature Range (Self-temperature rise is not included): -40 to +85°C
Continued on the following page.
oThis
data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for Automotive Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2012.11.8
http://www.murata.com/
Inductors (Coils) > Chip Inductor for Automotive (Chip Coil for Automotive) > Power Inductor (Wire Wound Type for Choke)
Data Sheet
Continued from the preceding page.
2
c
Impedance-Frequency Characteristics (Typ.)
LQH32C_23/LQH32C_33
100
c
Inductance-Current Characteristics (Typ.)
LQH32C_23/LQH32C_33
1000
10
100
Impedance (kΩ)
Inductance (μH)
1
22μH
4.7μH
1.0μH
0.1
22μH
10
4.7μH
1
0.01
1.0μH
0.001
1
10
100
Frequency (MHz)
1000
0.1
1
10
100
DC Current (mA)
1000
c !Caution/Notice
!Caution
(Rating)
Do not use products beyond the rated current as
this may create excessive heat.
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profile
where peak solder temperature is below the Tin melting
point is used. Please confirm the solderability of Tin
plating termination chip before use.
oThis
data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for Automotive Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2012.11.8
http://www.murata.com/