REVISION G
DO NOT
SCALE FROM
THIS PRINT
Pb THIS PRODUCT MANUFACTURED
WITH LEAD-FREE PROCESSING
DESIGNED & DIMENSIONED
IN MILLIMETERS[INCHES]
RF25S-XXXXX-XXXXXX-XXXX
OVERALL CABLE LENGTH
MILLIMETERS OF CABLE
0100 MIN. (SEE NOTE 8 & 9)
END 2 PLATING OPTION
1: GOLD ALL COMPONENTS
4: ALTERNATE GOLD / GOLD FLASH / NICKEL
6. ALTERNATE H GOLD / H GOLD / NICKEL
7. ALTERNATE GOLD MEDIUM/ GOLD FLASH
9. ALTERNATE HEAVY GOLD/MEDIUM GOLD
P: HEAVY GOLD / PASSIVATED STAINLESS STEEL
(LEAVE BLANK FOR -SING OR -XXXXXX
END 2 PREPARATION)
END 2 CONNECTOR OR PREPARATION
-01SP: SMA-P-C-X-ST-CS5 (SEE SHEET 2)
-01BJ: SMA-J-C-X-ST-BS5 (SEE SHEET 2)
-00SJ: SMP-J-C-XX-ST-CS5 (SEE SHEET 2)
-00RJ: SMP-J-C-XX-RA-CS5 (SEE SHEET 2)
-V3SJ: MMCXV-J-C-XX-ST-CS5 (SEE SHEET 3)
-V3SP: MMCXV-P-C-XX-ST-CS5 (SEE SHEET 3)
-V3RP: MMCXV-P-C-XX-RA-CS5 (SEE SHEET 3)
-SCC4: PRB4-P-C-X-ST-CS5 (SEE SHEET 3)
-92SJ: 292XX-J-C-XX-ST-CS5 (SEE SHEET 3)
-92SP: 292XX-P-C-XX-ST-CS5 (SEE SHEET 3)
-SING: SINGLE ENDED (ONE END ONLY,SEE NOTE 11)
-XXXXXX: STRIPPED AND TINNED (THIS END ONLY-
SEE NOTES 11-15, 17 & SHEET 2, FIG 3)
(SEE FIG 2) "C" FORMAT: X.Xmm
(SEE FIG 2) "B" FORMAT: X.Xmm
(SEE FIG 2) "A" FORMAT: X.Xmm
CABLE STRIPPING DIMENSIONS
PER CONFIGURATIONS
(SEE NOTES 12,13,14,15)
"A" mm
"B" mm
"C" mm
C
*
*
*
*
*
C
C
FIG 2
CABLE CALLOUT
25S: CCA-25S(TEMP-FLEX CABLE)
MWC-2550-01 CABLE
END 1 CONNECTOR
-01SP: SMA-P-C-X-ST-CS5 (SEE SHEET 2)
-01BJ: SMA-J-C-X-ST-BS5 (SEE SHEET 2)
-00SJ: SMP-J-C-XX-ST-CS5 (SEE SHEET 2)
-00RJ: SMP-J-C-XX-RA-CS5 (SEE SHEET 2)
-V3SJ: MMCXV-J-C-XX-ST-CS5 (SEE SHEET 3)
-V3SP: MMCXV-P-C-XX-ST-CS5 (SEE SHEET 3)
-V3RP: MMCXV-P-C-XX-RA-CS5 (SEE SHEET 3)
-SCC4: PRB4-P-C-X-ST-CS5 (SEE SHEET 3)
-92SJ: 292XX-J-C-XX-ST-CS5 (SEE SHEET 3)
-92SP: 292XX-P-C-XX-ST-CS5 (SEE SHEET 3)
END 1 PLATING OPTION
1: GOLD ALL COMPONENTS
4: ALTERNATE GOLD / GOLD FLASH / NICKEL
6. ALTERNATE H GOLD / H GOLD / NICKEL
7. ALTERNATE GOLD MEDIUM/ GOLD FLASH
9. ALTERNATE HEAVY GOLD/MEDIUM GOLD
P: HEAVY GOLD / PASSIVATED STAINLESS STEEL
(SEE SHEET 2 & 3 FOR PLATING SPECIFICS)
"D" mm
"E" mm
*
*
*
*
*
* = NOT RELEASED FOR PRODUCTION
*
*
*
*
*
DO NOT LEAVE ANY SPACE BLANK,
EACH MUST CONTAIN A
NUMERIC CHARACTER 0 THRU 9.
NOTES:
1.
C
REPRESENTS A CRITICAL DIMENSION
2. CABLE CUT LENGTH:
= (LENGTH: XXXX) - (SUBTRACTOR FOR END 1) - (SUBTRACTOR FOR END 2)
(SEE TABLE 1 FOR SUBTRACTORS)
C
3. ASSEMBLY TO BE 100% TESTED FOR OPENS & SHORTS
C
4. ASSEMBLY TO BE 100% HI-POT TESTED PER TABLE 1
5. AFTER FINAL ELECTRICAL TESTS, LABEL EACH CABLE ASSEMBLY WITH 1 LABEL -ET
C
6. CRITICALS ON CONNECTOR PRINTS TO BE CHECKED IN PROCESS.
7. FINISHED ASSEMBLIES TO BE PACKAGED PER PACKAGING STANDARD CO-HD-WI-3040-M.
FIG 1
LOCK WASHERS AND NUTS TO BE SHIPPED UNASSEMBLED. GASKETS TO BE INSTALLED ON CABLE.
8. CABLE STOCKED IN INCHES, 1 INCH = 25.4 MILLIMETERS
RF25S-01SPX-01SPX-XXXX SHOWN
9. CABLE LENGTHS LONGER THAN 500 MILLIMETERS ARE NOT SUPPORTED BY S.I. TEST DATA
10. MINIMUM BEND RADIUS FOR RG25S = 9.0 [.35]
F:\DWG\MISC\MKTG\RF25S-XXXXX-XXXXXX-XXXX-MKT.SLDDRW
11. FOR SING ENDED OR STRIPPED AND TINNED ASSEMBLIES: MAKE A DOUBLE ENDED
UNLESS OTHERWISE SPECIFIED,
PROPRIETARY NOTE
ASSEMBLY AT TWICE THE CABLE LENGTH AND TEST BEFORE CUTTING ASSEMBLY IN HALF.
DIMENSIONS ARE IN
THIS DOCUMENT CONTAINS INFORMATION
MILLIMETERS [INCHES].
12. DIM "A", "B", AND "C" HAVE A MINIMUM VALUE OF 0.0mm & A MAXIMUM VALUE OF 9.9mm
CONFIDENTIAL AND PROPRIETARY TO
TOLERANCES ARE:
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
13. PRODUCTION OF STRIP AND TIN FOR CENTER DIELECTIC USE: A
OR TRANSFERRED TO OTHER DOCUMENTS OR
DECIMALS
ANGLES
DISCLOSED TO OTHERS OR USED FOR ANY
14. PRODUCTION OF STRIP AND TIN FOR SHIELD USE: D=A+B
.X: 0.3 [.01]
5
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PURPOSE OTHER THAN THAT WHICH IT WAS
15. PRODUCTION OF STRIP AND TIN FOR JACKET USE: E=A+B+C
.XX: 0.13 [.005]
PHONE: 812-944-6733
FAX: 812-948-5047
OBTAINED WITHOUT THE EXPRESSED WRITTEN
.XXX: 0.051 [.0020]
CONSENT OF SAMTEC, INC.
16. FOR STRIPPED AND TINNED OPTION, ONLY THE CENTER CONDUCTOR IS TINNED.
e-Mail info@SAMTEC.com
code 55322
SHEET SCALE: 2:1
DESCRIPTION:
MATERIAL:
17. CONNECTORS TO BE ORIENTED ACCORDING TO CO-HD-WI-3048-M.
DO NOT SCALE DRAWING
SEE END 1 AND END 2 ASSEMBLY PRINTS
RF25S CABLE ASSEMBLY
DWG. NO.
RF25S-XXXXX-XXXXXX-XXXX
07/26/2011
SHEET
1
OF
3
BY:
ALVIN W
REVISION G
(STRAIGHT PLUG)
(USE DRAWING No.
SMA-P-C-X-ST-CS5
FOR ASSEMBLY INSTRUCTIONS)
-01SP
(STRAIGHT BULKHEAD JACK)
(USE DRAWING No.
SMA-J-C-X-ST-BS5
FOR ASSEMBLY INSTRUCTIONS)
-01BJ
(STRAIGHT JACK)
(USE DRAWING No. SMP-J-C-XX-ST-CS5
FOR ASSEMBLY INSTRUCTIONS)
-00SJ
PLATING
1: 30μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N:
SMA-P-C-HF-ST-CS5)
NOTE: ALL CRITICAL DIMENSIONS ON SMA-P-C-XX-ST-CS5
THAT APPLY MUST BE VERIFIED.
PLATING
1: 30μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N:
SMA-J-C-HF-ST-BS5)
NOTE: ALL CRITICAL DIMENSIONS ON SMA-J-C-XX-ST-BS5
THAT APPLY MUST BE VERIFIED.
PLATING OPTIONS
7: 10μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
100μ" MIN. NICKEL REMAINING METAL PARTS
(END CONNECTOR P/N: SMP-J-C-GF-ST-CS5)
9: 30μ" MIN. GOLD CENTER CONTACT
10μ" MIN. GOLD OUTER CONTACT
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: SMP-J-C-HG-ST-CS5)
NOTE: ALL CRITICAL DIMENSIONS ON SMP-J-C-XX-ST-CS5
THAT APPLY MUST BE VERIFIED.
(RIGHT ANGLE JACK)
(USE DRAWING No. SMP-J-C-XX-RA-CS5
FOR ASSEMBLY INSTRUCTIONS)
-00RJ
PLATING OPTIONS
7: 10μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
100μ" MIN. NICKEL REMAINING METAL PARTS
(END CONNECTOR P/N: SMP-J-C-GF-RA-CS5)
9: 30μ" MIN. GOLD CENTER CONTACT
10μ" MIN. GOLD OUTER CONTACT
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: SMP-J-C-HG-RA-CS5)
NOTE: ALL CRITICAL DIMENSIONS ON SMP-J-C-XX-RA-CS5
THAT APPLY MUST BE VERIFIED.
RF25S-01SPX-320064-XXXX SHOWN
FIG 3
F:\DWG\MISC\MKTG\RF25S-XXXXX-XXXXXX-XXXX-MKT.SLDDRW
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
DO NOT SCALE DRAWING
SHEET SCALE: 1:1
RF25S CABLE ASSEMBLY
BY:
ALVIN W
RF25S-XXXXX-XXXXXX-XXXX
07/26/2011
SHEET
2
OF
3
REVISION G
*
-V3SJ
(STRAIGHT JACK)
*
-V3SP
(STRAIGHT PLUG)
*
-V3RP
(RIGHT ANGLE PLUG)
(USE DRAWING No. MMCXV-J-C-XX-ST-CS5
FOR ASSEMBLY INSTRUCTIONS)
(USE DRAWING No. MMCXV-P-C-XX-ST-CS5
FOR ASSEMBLY INSTRUCTIONS)
(USE DRAWING No. MMCXV-P-C-XX-RA-CS5
FOR ASSEMBLY INSTRUCTIONS)
PLATING
1: 30μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: MMCXV-J-C-HF-ST-CS5)
4: 10μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
100μ" MIN. NICKEL REMAINING METAL PARTS
(END CONNECTOR P/N: MMCXV-J-C-GF-ST-CS5)
NOTE: ALL CRITICAL DIMENSIONS ON MMCXV-J-C-XX-ST-CS5
THAT APPLY MUST BE VERIFIED.
PLATING
1: 30μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: MMCXV-P-C-HF-ST-CS5)
4: 10μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
100μ" MIN. NICKEL REMAINING METAL PARTS
(END CONNECTOR P/N: MMCXV-P-C-GF-ST-CS5)
NOTE: ALL CRITICAL DIMENSIONS ON MMCXV-P-C-XX-ST-CS5
THAT APPLY MUST BE VERIFIED.
*
-92SJ
(STRAIGHT JACK)
PLATING
1: 30μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: MMCXV-P-C-HF-RA-CS5)
4: 10μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
100μ" MIN. NICKEL REMAINING METAL PARTS
(END CONNECTOR P/N: MMCXV-P-C-GF-RA-CS5)
NOTE: ALL CRITICAL DIMENSIONS ON MMCXV-P-C-XX-RA-CS5
THAT APPLY MUST BE VERIFIED.
*
-92SP
(STRAIGHT PLUG)
(STRAIGHT PLUG)
(USE DRAWING No. PRB4-P-C-X-ST-CS5
FOR ASSEMBLY INSTRUCTIONS)
-SCC4
(USE DRAWING No. 292XX-J-C-XX-ST-CS5
FOR ASSEMBLY INSTRUCTIONS)
(USE DRAWING No. 292XX-P-C-XX-ST-CS5
FOR ASSEMBLY INSTRUCTIONS)
PLATING
1: 30μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: MMCXV-J-C-HF-ST-CS5)
NOTE: ALL CRITICAL DIMENSIONS ON MMCXV-J-C-XX-ST-CS5
THAT APPLY MUST BE VERIFIED.
PLATING OPTIONS
6: 30μ" MIN. GOLD CENTER CONTACT
30μ" MIN. GOLD OUTER CONTACT
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: 292PB-J-C-HH-ST-CS5)
9: 30μ" MIN. GOLD CENTER CONTACT
10μ" MIN. GOLD OUTER CONTACT
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: 292PB-J-C-HG-ST-CS5)
P: 30μ" MIN. GOLD CENTER CONTACT
PASSIVATED STAINLESS STEEL OUTER CONTACT
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: 292PS-J-C-HP-ST-CS5)
NOTE: ALL CRITICAL DIMENSIONS ON 292XX-J-C-XX-ST-CS5
THAT APPLY MUST BE VERIFIED.
PLATING OPTIONS
6: 30μ" MIN. GOLD CENTER CONTACT
30μ" MIN. GOLD OUTER CONTACT
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: 292PB-P-C-HH-ST-CS5)
9: 30μ" MIN. GOLD CENTER CONTACT
10μ" MIN. GOLD OUTER CONTACT
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: 292PB-P-C-HG-ST-CS5)
P: 30μ" MIN. GOLD CENTER CONTACT
PASSIVATED STAINLESS STEEL OUTER CONTACT
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: 292PS-P-C-HP-ST-CS5)
NOTE: ALL CRITICAL DIMENSIONS ON 292XX-P-C-XX-ST-CS5
THAT APPLY MUST BE VERIFIED.
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
DO NOT SCALE DRAWING
SHEET SCALE: 1:1
RF25S CABLE ASSEMBLY
RF25S-XXXXX-XXXXXX-XXXX
07/26/2011
SHEET
3
OF
3
F:\DWG\MISC\MKTG\RF25S-XXXXX-XXXXXX-XXXX-MKT.SLDDRW
BY:
ALVIN W
京公网安备 11010802033920号
EEWORLD
