77311-132-24LF

FP5217 is a non-synchronous boost driver IC with built-in NMOS30V/8A/15mΩ, low input startup voltage 2.8V and wide operating voltage 5V~24V, single lithium battery 3V~4.2V application, connect Vout...[Details]

Abstract: Automatic meter reading technology provides a communication port to the meter to read the value remotely electronically. This application note discusses the different features of Maxim RS-48...[Details]

1 Characteristics and test requirements of mixed signal testing With the deepening of the digital wave, chips with mixed signal functions are increasingly appearing in people's lives. MODEM (s...[Details]

As vehicles become smarter, become part of the Internet of Things (IoT), and implement advanced driver assistance systems (ADAS) features, more electronics and power are required in automotive design...[Details]

French lawmakers on Wednesday largely agreed to new controls to manage the rollout of 5G networks and infrastructure, Reuters reported, as global scrutiny grows over potential security threats posed ...[Details]

We have already introduced setting the USB device address. What should we do next? After getting the device address, the host controller will send it again to get the device descriptor that has been r...[Details]

We would like to thank our customers for their continued recognition and support, and thank all departments for their efforts over the past year, finally all the products have been successfully del...[Details]

Micromotors are key actuators in micro-electromechanical systems. With the in-depth research of electronic technology and precision machining technology, micromotors are developing in the directio...[Details]

Today, when I was learning how to use timer 0 to complete the timing, I found that I didn’t quite understand how to calculate the initial value, so I looked for the answer online. After reading many p...[Details]

　　1 Introduction    　　Fuze software refers to the program embedded in the fuze system that controls the fuze hardware. Its function is to control the fuze safety system and firing system, prevent ...[Details]

EXTI Each interrupt/event has independent triggering and masking, and each interrupt line has a dedicated status bit. It supports up to 23 software interrupt/event requests. When detecting external s...[Details]

Introduction The RISC processor commonly used in embedded systems is the ARM core, which has the characteristics of small size, low power consumption, low cost and high cost performance. However, no...[Details]

Powering 20-30 white light-emitting diodes (LEDs) from three alkaline batteries presents an interesting problem with conventional boost converters. The required boost ratio and duty cycle are impracti...[Details]

1. How to choose crystal in PIC microcontroller oscillation circuit For a high-reliability system design, the choice of crystal is very important. This is especially true for systems designed with sl...[Details]

Consumers have higher expectations for the fast charging experience of electric vehicles. They want to charge the battery to 80% in 15 minutes or less. To meet this expectation, OEMs are...[Details]