AL0410BR82K-S-A

From the manufacturing process to all application areas, extremely low power technology has gradually become an indispensable requirement in all designs. Energy-sensitive applications, especially prod...[Details]

　　1. The difference between the "read pin" and "read latch" instructions of the parallel I/O port 　　 　　There are two types of reading parallel I/O ports: "read pin" and "read latch". Take the P1 port...[Details]

On the afternoon of February 1, the 2024 Maqiao Town Entrepreneurs Association was held in Qizhong Village. Qiaotian Intelligence Partner Zhang Chuan and Qiaotian Intelligence Chief Technol...[Details]

The X-ray flaw detector is mainly used to detect whether there are defects (cracks, sand holes, pores, white spots, inclusions, etc.) inside the machined parts, so as to determine whether the workpiec...[Details]

Recently, the largest national 5G power test network in China was completed in Jinjialing, Laoshan, Qingdao, Guzhenkou, West Coast, Qingdao Olympic Sailing Center and Qingdao State Grid Dispatching...[Details]

TI's LM3466 is a smart linear LED driver for multi-channel LED systems. It can automatically balance the current of each LED channel, easily preset and fine-tune the current between LED strings, with ...[Details]

Want clinical-grade PPG for your wearable device? Just look here On the feature list of health and fitness wearables, heart rate (HR) and blood oxygen saturation (SpO2) are rapidly moving from the ...[Details]

Capacitive sensors generally convert the measured change into a change in capacitance. At present, various types of sensors based on this principle have been widely used in measuring acceleration, li...[Details]

In June this year, Shanghai Institute of Microelectronics Industry funded Shanghai University's 8-inch MEMS pilot line with a quarter of the total operating hours per year for teaching practice in th...[Details]

Many of you have had similar experiences. When using ucosii to create a task, you are not sure what the appropriate task stack size should be. In frustration, you just randomly set a number, such as 1...[Details]

Abstract: In order to meet the needs of testing and evaluating the lighting performance of automobile headlights, a vehicle-level dynamic test method is proposed. First, a test system inte...[Details]

A smart microgrid is a system composed of loads and micro power sources. It can provide both electricity and heat. The power supply inside the microgrid is mainly composed of power electronic dev...[Details]

1. GPIO Description GPIO (General Purpose I/O ports) is a general purpose input/output port. In practical applications, whether it is connecting an LCD, connecting a keyboard, controlling a running...[Details]

1. Use the timer timing function to realize the timer single overflow interrupt and realize P3.0 square wave output #include "cc430x613x.h"      void main()   {       WDTCTL = WDTPW + WDTHOLD; // S...[Details]

As the unit brightness continues to increase, LEDs are increasingly used in the lighting field. In order to continue to increase the brightness of LEDs, it is inevitable to incre...[Details]