The JDSU near infrared fused coupler splits or combines light at any selected
wavelength from 700 to 1150 nm. Designed for applications in fiber laser, sensor
and avionics applications, the coupler utilizes low loss fused fiber technology. No
light leaves the fiber and therefore no alignment is required; and there are no
unwanted reflections. Furthermore the output fiber pigtails may be directly
integrated into beam delivery systems.
NORTH AMERICA
:
800 498-JDSU (5378)
WORLDWIDE
:
+800 5378-JDSU
WEBSITE
:
www.jdsu.com
FUSED COUPLER, NEAR INFRARED
2
Configuration
1x2
P1 (Red) COMMON (Input)
P2 (Blue) SIGNAL (Input)
P3 (Red) TAP (Output)
2x2
P1 (Red) COMMON (Input)
P2 (Blue) SIGNAL (Input)
P4 (Blue)
P3 (Red) TAP (Output)
Insertion Loss
Coupling Ratio
Grade
Available Housing Option
Signal Path Insertion Loss
1, 2
(Maximum)
0.9 dB
1.1 dB
1.5 dB
1.7 dB
2.2 dB
2.4 dB
3.0 dB
3.2 dB
3.8 dB
4.0 dB
Tap Path Insertion Loss
1, 2
(Maximum)
12.2 dB
12.4 dB
8.4 dB
8.6 dB
6.4 dB
6.5 dB
4.9 dB
5.1 dB
3.8 dB
4.0 dB
10%
10%
20%
20%
30%
30%
40%
40%
50%
50%
A
B
A
B
A
B
A
B
A
B
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
1. Insertion loss at operating wavelength range (not including PDL, TDL or connector losses).
2. In 2x2 couplers with a coupling ratio of 20% or lower, insertion loss is not specified for launch through second input port (P4).
FUSED COUPLER, NEAR INFRARED
3
Housing Option
Housing Code
3
4
5
6
Description
Regular
Ø 0.9 mm slim
Ø 0.9 mm semi-ruggedized
Ø 3.0 mm fully ruggedized
1x2, 2x2 Dimensions (mm)
3.0 (Ø) x 50 (L)
3.0 (Ø) x 60 (L)
5.0 (Ø) x 75 (L)
80 (L) x 10 (W) x 8 (H)
Pigtail
Primary-coated fiber
Ø 0.9 mm loose-tube
Ø 0.9 mm loose-tube
Ø 3.0 mm fan-out sleeving
Specifications
Parameter
Operating wavelength range
1
Excess loss
Return loss/Directivity
Pigtail tensile load
Optical power handling
Operating temperature range
2
Storage temperature range
Fiber type
Grade A
Grade B
Typical
Minimum
Maximum
Maximum
Any wavelength within the 700 to 1150 nm range
0.30 dB
0.50 dB
50 dB
5N
4W
-40 to 75 °C
-40 to 85 °C
Speciality fiber
1. Any specific wavelength point from within the range 633 to 850 nm may be selected. For wavelengths outside of this range, contact JDSU with specific requirements.
2. For connectorised component, operating temperature range is -5 to 75 °C.
FUSED COUPLER, NEAR INFRARED
4
Ordering Information
For more information on this or other products and their availability, please contact your local JDSU account manager or
JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at
customer.service@jdsu.com.
Sample: FFS-060K31A10 (Fused Fiber Speciality Coupler, 1060 nm, 50/50 coupling ratio, regular housing, 1x2, A grade, 1 m
pigtails, no connectors)
FFS-
Code
7
8
9
0
1
Wavelength
(First Digit)
7xx nm
8xx nm
9xx nm
10xx nm
11xx nm
Code
A
C
E
H
K
Coupling Ratio
1
10%
20%
30%
40%
50%
Code
1
2
Configuration
1x2
2x2
Code
0
1
3
5
9
A
B
Connectors
2, 4
None
FC/PC
FC/APC
SC/APC
FC/UPC
SC/UPC
LC
5
Code
A
B
Grade
Grade A
Grade B
Code
Wavelength
(Second and
Third Digit)
Examples:
33
x33 nm
32
x32 nm
57
x57 nm
Code
3
4
5
6
Housing
2
Regular
Ø 0.9 mm slim
Ø 0.9 mm
semi-ruggedised
Ø 3.0mm fully
ruggedised
Code
0
1
Pigtail Length
3
(Minimum)
0.5 meter
1 meter
1. Other coupling ratio are available. Please contact JDSU for ordering codes of coupling ratios not listed.
2. Connectors may be fitted to housing types 4, 5 and 6. For connectorisation of housing type 3, please contact JDSU sales office.
3. Minimum pigtail length. Other pigtail lengths are available on request. When the pigtail has been modified to include a
connector, pigtail length measurment includes the connector end face.
4. Excess Loss in specification table does not include connector losses.
5. LC connector is not available for housing code 6, fully ruggedised housing.
LC is a registered trademark of Lucent Technologies.
[i=s]This post was last edited by elec32156 on 2021-5-25 13:34[/i]Please tell me how to do ESD protection design in the whole circuit system as shown in the figure below?1. Equipment situation: The wh...
Waft (WebAssembly Framework for Things) is a high-performance application development framework for AIoT. It was developed by Alibaba engineers and is based on WebAssembly and self-developed rendering...
As the design scale continues to rise, various interface peripherals are dazzling, and clocks are inevitably "flying all over the sky" (note that "flying all over the sky" here does not mean abuse, bu...
[font=微软雅黑][size=4]The New Year is coming soon, and everyone is on their way home! [/size][/font] [font=微软雅黑][size=4][/size][/font] [font=微软雅黑][size=4] [b]I saw a useful passage a few days ago and wou...
On March 18, 2024, the groundbreaking ceremony for the 0.5GWh battery and energy storage cabinet project of Yecheng Industrial Park in Kashgar Economic Development Zone of Hunan Chenchu Energy Co...[Details]
In a domestic operation project of a Shenzhen Automation Co., Ltd., the project requires the control center system to send different command messages to the DC servo drive to control the start and ...[Details]
With the development of lithium battery technology and the increasing demand of consumers for battery life of smart terminal products, fast charging power management technology is being adopted by ...[Details]
At present, inductive charging has entered our daily lives through smartphones, and many car companies are also committed to the development of "wireless charging". Recently, public information shows...[Details]
The reason why semiconductor suppliers are generally launching LED drivers that support TRIAC dimming today is not because this dimming method has any particularly excellent performance, but becaus...[Details]
After having a certain understanding of the application of LED lights, I began to learn some about the application of digital tubes. On my development board, there are independent common anode tube...[Details]
In anticipation of solar energy becoming one of the world's major energy sources in the near future, ABB, a global power and automation technology giant, announced that it would acquire Power-One, ...[Details]
Common DC-DC applications are mostly suitable for lower Vin/Vout voltages (less than 30V-40V). It is rare to have a higher voltage input. This article introduces a buck converter that uses TL494 ...[Details]
According to media reports on August 7, solid-state battery company Weilan New Energy plans to go public in 2025. Li Hong, founder and chief scientist of Weilan New Energy, recently stated that the...[Details]
"Automation is unavoidable. Even if you simply replace manual labor with robots, once you enjoy the efficiency it brings, you can't go back... If you don't actively apply automation, you won't know...[Details]
1) The negative grid uses antimony-free lead-calcium alloy to increase the negative electrode hydrogen evolution overpotential, that is, to increase the critical voltage of gas evolution. It is calcul...[Details]
According to foreign media reports, U.S. stocks closed mixed, with the Dow Jones Industrial Average closing down slightly, and the Nasdaq Composite Index rising for the sixth consecutive trading day,...[Details]
In my previous blog post, "EtherCAT and C2000™ MCUs - Real-time communication meets real-time control," I discussed a design in the TI Designs reference design library to help simplify hardware devel...[Details]
Up to now, more than 180 models have been tested based on the CC-1000T intelligent cockpit evaluation system of Cheyun Research, of which more than 79% have the ability to upgrade via OTA, and more...[Details]
Analog electronics
京公网安备 11010802033920号
EEWORLD
