Q-SERIES 8mmØ Panel Mounting LED Indicator
Product Specification
Distinctive Features and Specifications
•
•
•
•
•
•
•
•
8mm panel mounting LED indicator
5mm coloured diffused epoxy lens or 5mm water clear super bright LEDs
Bright chrome, black chrome or satin grey bezel finish
Prominent, recessed and flush bezel styles
2VDC – 220VAC
(2.8 x 0.8) terminals, pins or (200mm long) wire terminations
IP67 sealing option (EN60529)
Supplied with fixing nut and spring washer
Ø 8,00 ±0,1
PANEL CUTOUT
NB: UL Recognised Component
TECHNICAL SPECIFICATIONS
Switch Voltage
2VDC (No Resistor)
12VDC
24VDC
28VDC
110VAC
230VAC
Intensity (Typical) at |op Standard
Operating Voltage Vop
(Min to Max)
1.8 to 2.5VDC
10.8 to 13.2VDC
21.6 to 26.4VDC
25.2 to 30.8VDC
99 to 121VAC
207 to 253VAC
Operating Current |op
(Typical All Types)
20mA
20mA
20mA
20mA
6mA
3mA
Prominent and Recessed
Flush
Forward Voltage
(all voltages)
(all voltages)
HE Red
50mcd
10mcd
2.0V
Green
40mcd
8mcd
2.2V
Yellow
40mcd
6mcd
2.1V
Blue
90mcd
4mcd
3.8V
White
150mcd
25mcd
3.8V
Bi-colour (Typical) (Red/Green)
20/10mcd
10/8mcd
2.0V/2.2V
Tri-colour (Typical) (Red/Green/Yellow)
20/10/10mcd
10/8/6mcd
2.0V/2.2V/2.1V
Bi-colour - The colour is changed by reversing the polarity of the supply voltage.
Tri-colour - The indicator has red and green LEDs, when both connected yellow is produced.
Super Bright
HE Red
Green
Yellow
Blue
White
Prominent and Recessed
Flush
(all voltages)
(all voltages)
10,000mcd
600mcd
4,500mcd
350mcd
2,100mcd
140mcd
1,400mcd
200mcd
2,000mcd
150mcd
Luminous intensity will be reduced with lower operating current.
Forward Voltage
2.2V
4.0V
2.3V
3.7V
3.7V
Max Reverse Voltage:
5V
Viewing Angle:
100° (dependant on model)
Life Expectancy:
100,000 hours
Operating Temperature Range:
–40 to +85°C
Note: The operating voltage must not be exceeded by more that 10% as this will result in reduced life expectancy.
The company reserves the right to change specifications without notice.
www.apem.com
4
Q-SERIES 8mmØ Panel Mounting LED Indicator
Order Overview
STANDARD OPTIONS
The Q8 Series is available with a range of standard options, to specify your LED, simply choose one option from each column.
An example is shown below.
Q
SERIES
Q
8
MOUNTING
HOLE
8 = Ø8mm
P
BEZEL
STYLE
P = Prominent
R = Recessed
F = Flush
8
TERMINALS
1 = Solder Lug/
Fastons
(2.8 x 0.8)
2 = Pins
3 = Wires
6 = Short body
Pins
7 = Short body
Wires
8 = Short body
Solder lug/
faston
G
BEZEL FINISH
C = Bright Chrome
B = Black Chrome
G = Satin Grey
XX
TYPE OF
ILLUMINATION
XX = Fixed Light
KK = Flashing Light
(only up to 28VDC)
YY = Bi-colour
ZZ = Tri-colour
Y
LED COLOUR
R = Red
G = Green
Y = Yellow
B = Blue
W = White
12
VOLTAGE
02 = 2VDC
06 = 6VDC
12 = 12VDC
12A = 12VAC/DC
24 = 24VDC
24A = 24VAC/DC
E
SEALING
(Blank) = Unsealed
E = IP67
SR = Super Bright Red
SG = Super Bright Green
SY = Super Bright Yellow
SB = Super Bright Blue
SW = Super Bright White
28 = 28VDC
28A = 28VAC/DC
110 = 110VAC
220 = 220VAC
Example Q8P8GXXY02E
Ø8mm, prominent bezel, short body solder
lug terminals, satin grey finish, fixed light,
yellow, 2volt DC LED, IP67 Panel Seal
RG = Red/Green
RY = Red/Yellow
GY = Green/Yellow
RYG = Red/Yellow/Green
• Gold Faston terminal denotes Anode (+), silver terminal denotes Cathode (-)
• Standard wire length is 200mm, 24AWG, red wire denotes Anode (+), black wire denotes Cathode (-)
for other wire lengths consult APEM
• For LEDs with alternate voltages consult APEM
• Bi-colour LEDs, by connecting the gold Faston (+) one colour is produced, by reversing the supply voltage another colour is
produced – Bi-colours are available up to 28VDC. [AC products not available]
• Take care when soldering to the Faston terminals
• Short body pins and wires are only available up to 28VDC
• Short body Fastons are only available without integral resistor (2VDC)
• The Tri-colour LED has red and green LEDs when both are connected yellow is produced
• Standard Tri-colour Faston terminals are two Anodes (+) and one Cathode (-)
• Tri-colour wires are one red (+) and one green (+) Anode and one black (-) Cathode
• Tri-colour pins are centre (–) cathode, shortest (+) anode pin green, longest (+) anode pin red
• Tri-colours are only available up to 28VAC/DC and use 2.0mm solder lug/fastons
• Maximum panel thickness 7mm
• For behind panel epoxy sealed options please consult Apem
• We recommend using Superbright LEDs for use at 220VAC
• For resistorless versions (02) please pay attention to the forward voltage
www.apem.com
6
MicroPython Open Source section
京公网安备 11010802033920号
EEWORLD
