REVISION AR
DO NOT
SCALE FROM
THIS PRINT
AR
(No OF POS x .050 [1.27]) +.002/-.010
[+.05/-.25]
PATENT NUMBERS
5713755 / 5961339
AR
FTR-1XX-XX-XX-D-X-XX
OPTION
-XX: POLARIZING SPECIFICATION
XX INDICATES POS TO BE OMMITED
-A: ALIGNMENT PIN (5 POS MIN)
( SEE FIG 2, SHT 2)
SAMTEC DISCRETION ON WHICH
-A PIN USED.
-LC: STAKED LOCKING CLIP (USE LC-05-TM)
(SEE FIG 4, SHT 2 & NOTE 10)
-TR: TAPE AND REEL PACKAGING
OPTION
-P: PICK & PLACE PAD
(USE PPP-22)
(SEE FIG 3, SHT 2)
[5 POS MIN]
No OF POSITIONS
-02 THRU -50
(PER ROW)
LEAD STYLE
SEE TABLE 1
AR
02
100
SEE NOTE 4
.196 4.98
REF
.100 2.54
REF
01
.050 1.27 REF
99
HTMS-50-D
3 MAX SWAY
(EITHER DIRECTION)
PLATING SPECIFICATION
-G: 10µ" GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL
-T: MATTE TIN CONTACT AND TAIL
(LEAD STYLES -01, -02, -03, -51, -52 ONLY)
-S: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-F: 3µ" FLASH SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL (LEAD STYLE -01 ONLY)
-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-TM: MATTE TIN CONTACT AND TAIL
(LEAD STYLES -01, -02, -03, -51, -52 ONLY)
-FM: 3µ" FLASH SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-H: 30µ" HEAVY GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL
-L: 10µ" LIGHT SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
BODY SPECIFICATION
-D: DOUBLE (USE HTMS-50-D)
T-1M6-XX-XX-2
.018 0.46 SQ
REF
CONTACT
AREA
2 MAX SWAY
(EITHER DIRECTION)
2 MAX SWAY
(EITHER DIRECTION)
C1
"B"
.050 1.27 (TYP)
(SEE NOTE 5)
.100 2.54
REF
90°
- 2°
(TYP)
C3
C2
+4°
.004 [.10]
.05 1.3
(SEE NOTE 7)
AR
NOTES:
1.
C
REPRESENTS A CRITICAL DIMENSION.
2. MAXIMUM CUT FLASH: .010[.25].
3. MINIMUM PUSHOUT FORCE: 2 LB.
4. MAXIMUM PIN ROTATION IN BODY: 2°.
5. SHEAR TAILS TO DIMENSION SHOWN.
6. MAXIMUM BURR ALLOWANCE: .003[.08]
7. MEASURED AT BEND RADIUS.
8. TUBE POSITIONS -05 AND GREATER; LAYER PACKAGE
POSITIONS -02 THRU -04.
9. -P OPTION: TUBE POSITIONS -07 THRU -50;
ALL OTHERS, TAPE & REEL ONLY.
10. DUE TO HIGH AMOUNT OF INSERTION FORCE NEEDED,
THE -LC OPTION IS NOT COMPATIBLE WITH AUTO PLACEMENT.
SAMTEC RECOMENDS MANUAL PLACEMENT FOR ALL
ASSEMBLIES WITH THE -LC OPTION.
.2960 7.518 REF
FIG 1
FTR-1XX-XX-D SHOWN
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
.X: .1 [2.5]
.XX: .01 [.3]
2
.XXX: .005 [.13]
.XXXX: .0020 [.051]
MATERIAL:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DECIMALS
ANGLES
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
INSULATOR: LCP, UL 94 VO, COLOR: BLACK
TERMINAL: PHOS BRONZE
HI-TEMP TERMINAL MICRO-STRIP (DOUBLE ROW)
AR
C:\EnterpriseVault\DWG\MISC\MKTG\FTR-1XX-XX-XX-D-X-XX-MKT.SLDDRW
FTR-1XX-XX-XX-D-X-XX
02/09/1995
SHEET
1
OF
2
BY:
BRATCHER
REVISION AR
HTMS-50-D-XX
.040 1.02
REF
.090 2.29
.090 2.29
REF
(No OF POS - 2) x .0500[1.270]
.0430 1.092 REF
SMA-8H
(No OF POS -2) x .0500[1.270] REF
.0430 1.092
REF
.040 1.02
REF
STAKED
(5 POSITIONS MINIMUM)
AR
MOLDED
(5 POSITIONS MINIMUM)
FIG 2
-A OPTION: ALIGNMENT PIN
(DIFFERENT AS SHOWN, OTHERWISE SEE FIG 1)
"N"
"Q"
.375 9.53 REF
.390 9.91 REF
.230 5.84
REF
PPP-22
.105 2.67
AR
(No. OF POS - 2) x .0500[1.270]
.056 1.42 REF
C
L
"N" = USE MEASURED DIM
"Q" = {("N" - .375) / 2} .020
FIG 3
-P PICK & PLACE
(5 POSITIONS MINIMUM, SEE NOTE 9)
LC-05-TM
FIG 4
-LC OPTION: STAKED LOCKING CLIP
(6 POSITIONS MINIMUM)
(DIFFERENT AS SHOWN, OTHERWISE SEE FIG 1)
AR
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
HI-TEMP TERMINAL MICRO-STRIP (DOUBLE ROW)
FTR-1XX-XX-XX-D-X-XX
02/09/1995
SHEET
2
OF
2
C:\EnterpriseVault\DWG\MISC\MKTG\FTR-1XX-XX-XX-D-X-XX-MKT.SLDDRW
BY:
BRATCHER
京公网安备 11010802033920号
EEWORLD
