Push-on Bayonet Lock Miniature Waterproof Connectors
HR34B Series
Push-on Bayonet Lock
Mating : Just inserting plug unit will complete mating
Feb.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
Un-mating : Rotating sleeve to unlock mating
fig.1
■Features
1. Water and dust protection
• IP67 or more (IP68) water and dust protection rating when
fully mated.
• Resistant to industrial grade oils.
• 4-position receptacles are sealed against water penetration
when mounted on the panel - no protective cap is required.
Cable exit directions
2. Easy and precise mating
•
Mating: Just inserting plug unit completes mating
Unmating: Rotating sleeve counterclockwise unlocks
connectors (fig.1)
•
Marking helps align plug with receptacle when mating.
•
3 guide keys make blind mating possible.
(Receptacle structure prevents plug from damaging
receptacle terminals)
fig.2
3. Multi-directional cable exit
Right angle plugs allow the cable to exit in 8 directions, in
45˚ increments.(fig.2)
4. Safty standards
¨
The 4-position connectors meet requirements of TUV
standard.
5. Wide variation
Item
Number of positions
Connector type
Terminations(plug)
Terminations(receptacle)
Conduit material
Applicable cable size(Reference)
4,10
straight plug,right angle plug,receptacle
solder,crimp
wire solder
plastic,metal
(Ø5.7~6.5), (Ø6.5~7.3), (Ø8.0~9.0)
2016.14
1
HR34B Series●Push-on Bayonet Lock Miniature Waterproof Connectors
■Product
Specifications
Current rating
Ratings
Voltage rating
10 pos. : 3A
4 pos. : 5A
10 pos. : 200V AC, 250V DC
4 pos. : 200V AC, 200V DC (Pollution degree 3)
400V AC, 400V DC (Pollution degree 2)
Specification
20mø max.
1,000Mø min.
No flashover or insulation breakdown
No electrical discontinuity of 10μs or longer
No electrical discontinuity of 10μs or longer
Contact resistance : 30mø max.
Operating temperature range
-25°C to 125°C
Storage temperature range
-10°C to 60°C
Item
1.Contact resistance
2.Insulation resistance
3.Withstanding voltage
4.Vibration
Conditions
1A DC
500V DC
10 pos. : 900V AC / 1 minute
4 pos. : 2,000V AC / 1 minute
Frequency : 10 to 500 Hz/cycle, total amplitude of 0.75
mm, 98m/s
2
each, 3 hours in 3 axis.
Acceleration of 490 m/s
2
, 11 ms duration,
3 axis, each for 3 hours
500 cycles
Temperature : -55°C
/
+15° to +35°C
/
+85°C
/
+15° to +35°C
Time
:-30
min.
/
2 to 3 min.
/
30 min.
/
2 to 3 min.
5 cycles
336 hours at 71°C, and humidity of 95%
At the depth of 1meters for 0.5 hours.
Feb.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
5.Shock
6.Durability
(Mating / un-mating)
7.Temperature cycle
Insulation resistance : 500Mø min.
8.Humidity
9.Water protection
Insulation resistance : 50Mø min. (at high humidity)
Insulation resistance : 500Mø min. (when dry)
No water penetration inside connector
■Materials
/ Finish
●Plugs
Part
Outer shell
Insulator
Female contacts
O-ring
Gasket
10 pos.
4 pos.
Material
Zinc alloy, aluminum alloy, and
polyamide resin (black)
PPS
Phosphor bronze
Copper alloy
Fluororubber,
Nitrile hydride rubber
Finish
Black chrome plating, black chromate
finish (Trivalent Chromium)
Color : Black
Gold plated
Silver plated
---------------
Remarks
---------------
UL94V-0
---------------
---------------
---------------
●Receptacles
Part
Outer shell
Insulator
Male contacts
Ground contact
O-ring
10 pos.
4 pos.
4 pos.
Zinc alloy
PPS
Copper alloy
Brass
Brass
Fluororubber
Material
Finish
Black chromate finish
(
Trivalent Chromium
)
Color : Black
Gold plated
Silver plated
Silver plated
---------------
Remarks
---------------
UL94V-0
---------------
---------------
---------------
---------------
2
HR34B Series●Push-on Bayonet Lock Miniature Waterproof Connectors
■
Product Number Structure
●Plugs
HR34B - 12 WP A - 10 S - X (
**
)
1
1
Series name
2
Shell size
3
Shell style
2
3
4
5
6
7
8
: HR34B Series
: Diameter(mm) of the mating interface of the plug
WP : Straight plug
WLP : Right-angle plug
4
Conduit material and Applicable cable size
A : Conduit material metal, Applicable cable (Reference) : (Ø5.7~6.5)
B : Conduit material metal, Applicable cable (Reference) : (Ø6.5~7.3)
D : Conduit material plastic, Applicable cable (Reference) : (Ø5.7~6.5)
E : Conduit material plastic, Applicable cable (Reference) : (Ø6.5~7.3)
K : Conduit material metal, Applicable cable (Reference) : (Ø8.0~9.0)
5
Number of contacts.
(Excluding ground contacts)
6
Contact type
S : Female, wire solder
SC : Female, crimp
7
Keying
Blank : Standard
X
: X key position
8
Other specifications : 2 numerical digits wil be added when
there is a specifications change other
than shown in positions
q
to
u
Feb.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
●Receptacles
HR34B - 12 WR A - 10 P - X (
**
)
1
1
2
3
4
2
3
4
5
6
7
8
Series name : HR34B Series
Shell size
: Diameter(mm) of the mating interface of the plug
Shell style
WR : Receptacle
Shell type
A : Square flange for 10 positions
B : Square flange for 4 positions
5
Number of contacts.
(Excluding ground contacts)
6
Contact type
P : Male,wire solder
7
Keying
Blank : Standard
X
: X key position
8
Other specifications : 2 numerical digits wil be added when
there is a specification change other
than shown in positions
q
to
u
●Crimp
contacts
HR34B - SC1 - 2 1 1
1
2
3
4
5
4
Conductor size : 20 to 25AWG
5
Plating
1 : Gold plated
1
Series name : HR34B Series
2
Contact style : SC1 : Female contact
3
Contact type
1 : 100pcs/pack
2 : 10,000pcs/reel
3
HR34B Series●Push-on Bayonet Lock Miniature Waterproof Connectors
■Straight
plugs
●Standard
type (Conduit material :Plastic)
49
Ø19
Feb.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
◆Wire
solder
Part No.
HR34B-12WPD-10S
HR34B-12WPE-10S
HR34B-12WPD-4S
HR34B-12WPD-4S-X
HR34B-12WPE-4S
HR34B-12WPE-4S-X
HRS No.
134-0026-0 00
134-0027-2 00
134-0020-3 00
134-0023-1 00
134-0025-7 00
134-0031-0 00
Ø8.5
(Ø6.5~7.3)
A
Ø7.4
Ø8.5
Ø7.4
Applicable cable diameter range(Reference)
(Ø5.7~6.5)
(Ø6.5~7.3)
(Ø5.7~6.5)
All dimensions : mm
Solder cup inner diameter
Ø1
Ø1.7
◆Crimp
(separate contacts required)
Part No.
HR34B-12WPD-10SC
HR34B-12WPE-10SC
HRS No.
134-0037-6 00
134-0038-9 00
A
Ø7.4
Ø8.5
Applicable cable diameter range(Reference)
(Ø5.7~6.5)
(Ø6.5~7.3)
●Robust
type(Conduit material :Metal)
◆Wire
solder
Part No.
HR34B-12WPA-10S(71)
HR34B-12WPB-10S(71)
HR34B-12WPK-10S
HRS No.
134-0004-7 71
134-0007-5 71
134-0052-0 00
A
Ø7.4
Ø8.5
Ø9.5
Applicable cable diameter range(Reference)
(Ø5.7~6.5)
(Ø6.5~7.3)
(Ø8.0~9.0)
Ø1
All dimensions : mm
Solder cup inner diameter
◆Crimp
(separate contacts required)
Part No.
HR34B-12WPA-10SC
HR34B-12WPB-10SC
HR34B-12WPK-10SC
HRS No.
134-0017-9 00
134-0028-5 00
134-0053-2 00
A
Ø7.4
Ø8.5
Ø9.5
Applicable cable diameter range(Reference)
(Ø5.7~6.5)
(Ø6.5~7.3)
(Ø8.0~9.0)
Not all cables of applicable dia. range can be easily assembled.
Please kindly check with factory before use.
BIllustrations
of mated connectors.
Straight plug Mating combinations
10 pos.plug + receptacle wire solder
4 pos.plug + receptacle wire solder
B
50.1
49.6
B
4
A
HR34B Series●Push-on Bayonet Lock Miniature Waterproof Connectors
■Right
angle plugs
●Standard
type (Conduit material : Plastic)
33.5
Ø19
Feb.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
◆Wire
solder
Part No.
HR34B-12WLPD-10S
HR34B-12WLPE-10S
HR34B-12WLPD-4S
HR34B-12WLPD-4S-X
HR34B-12WLPE-4S
HR34B-12WLPE-4S-X
HRS No.
134-0039-1 00
134-0040-0 00
134-0030-7 00
134-0034-8 00
134-0035-0 00
134-0036-3 00
Ø8.5
(Ø6.5~7.3)
A
Ø7.4
Ø8.5
Ø7.4
30.85
B
Applicable cable diameter range(Reference)
(Ø5.7~6.5)
(Ø6.5~7.3)
(Ø5.7~6.5)
A
B
All dimensions : mm
Solder cup inner diameter
Ø1
Ø1.7
◆Crimp
(separate contacts required)
Part No.
HR34B-12WLPD-10SC
HR34B-12WLPE-10SC
HRS No.
134-0041-3 00
134-0042-6 00
A
Ø7.4
Ø8.5
B
30.85
Applicable cable diameter range(Reference)
(Ø5.7~6.5)
(Ø6.5~7.3)
●Robust
type (Conduit material :Metal)
◆Wire
solder
Part No.
HR34B-12WLPA-10S(71)
HR34B-12WLPB-10S(71)
HR34B-12WLPK-10S
HRS No.
134-0005-0 71
134-0008-8 71
134-0054-5 00
A
Ø7.4
Ø8.5
Ø9.5
31.5
B
30.5
Applicable cable diameter range(Reference)
(Ø5.7~6.5)
(Ø6.5~7.3)
(Ø8.0~9.0)
Ø1
All dimensions : mm
Solder cup inner diameter
◆Crimp
(separate contacts required)
Part No.
HR34B-12WLPA-10SC
HR34B-12WLPB-10SC
HR34B-12WLPK-10SC
HRS No.
134-0018-1 00
134-0029-8 00
134-0055-8 00
A
Ø7.4
Ø8.5
Ø9.5
31.5
B
30.5
Applicable cable diameter range(Reference)
(Ø5.7~6.5)
(Ø6.5~7.3)
(Ø8.0~9.0)
Not all cables of applicable dia. range can be easily assembled.
Please kindly check with factory before use.
BIllustrations
of mated connectors.
Right-angle plug Mating Combinations
10 pos. plug shell A,B type.
10 pos. plug shell D,E type.
（33.5）
A
31.0
31.3
32.0
31.3
Plug + receptacle wire solder
Plug + receptacle wire solder
Plug + receptacle wire solder
10 pos. plug shell K type.
4 pos. plug + receptacle wire solder
A
5
京公网安备 11010802033920号
EEWORLD
