The JDSU near infrared fused coupler splits or combines light at any selected
wavelength from 700 to 1150 nm. Designed for applications in fiber laser, sensor
and avionics applications, the coupler utilizes low loss fused fiber technology. No
light leaves the fiber and therefore no alignment is required; and there are no
unwanted reflections. Furthermore the output fiber pigtails may be directly
integrated into beam delivery systems.
NORTH AMERICA
:
800 498-JDSU (5378)
WORLDWIDE
:
+800 5378-JDSU
WEBSITE
:
www.jdsu.com
FUSED COUPLER, NEAR INFRARED
2
Configuration
1x2
P1 (Red) COMMON (Input)
P2 (Blue) SIGNAL (Input)
P3 (Red) TAP (Output)
2x2
P1 (Red) COMMON (Input)
P2 (Blue) SIGNAL (Input)
P4 (Blue)
P3 (Red) TAP (Output)
Insertion Loss
Coupling Ratio
Grade
Available Housing Option
Signal Path Insertion Loss
1, 2
(Maximum)
0.9 dB
1.1 dB
1.5 dB
1.7 dB
2.2 dB
2.4 dB
3.0 dB
3.2 dB
3.8 dB
4.0 dB
Tap Path Insertion Loss
1, 2
(Maximum)
12.2 dB
12.4 dB
8.4 dB
8.6 dB
6.4 dB
6.5 dB
4.9 dB
5.1 dB
3.8 dB
4.0 dB
10%
10%
20%
20%
30%
30%
40%
40%
50%
50%
A
B
A
B
A
B
A
B
A
B
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
1. Insertion loss at operating wavelength range (not including PDL, TDL or connector losses).
2. In 2x2 couplers with a coupling ratio of 20% or lower, insertion loss is not specified for launch through second input port (P4).
FUSED COUPLER, NEAR INFRARED
3
Housing Option
Housing Code
3
4
5
6
Description
Regular
Ø 0.9 mm slim
Ø 0.9 mm semi-ruggedized
Ø 3.0 mm fully ruggedized
1x2, 2x2 Dimensions (mm)
3.0 (Ø) x 50 (L)
3.0 (Ø) x 60 (L)
5.0 (Ø) x 75 (L)
80 (L) x 10 (W) x 8 (H)
Pigtail
Primary-coated fiber
Ø 0.9 mm loose-tube
Ø 0.9 mm loose-tube
Ø 3.0 mm fan-out sleeving
Specifications
Parameter
Operating wavelength range
1
Excess loss
Return loss/Directivity
Pigtail tensile load
Optical power handling
Operating temperature range
2
Storage temperature range
Fiber type
Grade A
Grade B
Typical
Minimum
Maximum
Maximum
Any wavelength within the 700 to 1150 nm range
0.30 dB
0.50 dB
50 dB
5N
4W
-40 to 75 °C
-40 to 85 °C
Speciality fiber
1. Any specific wavelength point from within the range 633 to 850 nm may be selected. For wavelengths outside of this range, contact JDSU with specific requirements.
2. For connectorised component, operating temperature range is -5 to 75 °C.
FUSED COUPLER, NEAR INFRARED
4
Ordering Information
For more information on this or other products and their availability, please contact your local JDSU account manager or
JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at
customer.service@jdsu.com.
Sample: FFS-060K31A10 (Fused Fiber Speciality Coupler, 1060 nm, 50/50 coupling ratio, regular housing, 1x2, A grade, 1 m
pigtails, no connectors)
FFS-
Code
7
8
9
0
1
Wavelength
(First Digit)
7xx nm
8xx nm
9xx nm
10xx nm
11xx nm
Code
A
C
E
H
K
Coupling Ratio
1
10%
20%
30%
40%
50%
Code
1
2
Configuration
1x2
2x2
Code
0
1
3
5
9
A
B
Connectors
2, 4
None
FC/PC
FC/APC
SC/APC
FC/UPC
SC/UPC
LC
5
Code
A
B
Grade
Grade A
Grade B
Code
Wavelength
(Second and
Third Digit)
Examples:
33
x33 nm
32
x32 nm
57
x57 nm
Code
3
4
5
6
Housing
2
Regular
Ø 0.9 mm slim
Ø 0.9 mm
semi-ruggedised
Ø 3.0mm fully
ruggedised
Code
0
1
Pigtail Length
3
(Minimum)
0.5 meter
1 meter
1. Other coupling ratio are available. Please contact JDSU for ordering codes of coupling ratios not listed.
2. Connectors may be fitted to housing types 4, 5 and 6. For connectorisation of housing type 3, please contact JDSU sales office.
3. Minimum pigtail length. Other pigtail lengths are available on request. When the pigtail has been modified to include a
connector, pigtail length measurment includes the connector end face.
4. Excess Loss in specification table does not include connector losses.
5. LC connector is not available for housing code 6, fully ruggedised housing.
LC is a registered trademark of Lucent Technologies.
For offline power supplies, the flyback topology is a reasonable solution. However, if the end application of the design does not require isolation, the offline inverted buck topology has higher effic...
Flying probe test: Use probes to replace the bed of nails, and use multiple motor-driven, fast-moving electrical probes to contact the pins of the device and perform electrical measurements.During the...
Many analog circuits require a clock signal or require a task to be performed after a certain amount of time. For such applications, there are a variety of solutions available. For simple timing tasks...
The crystal oscillator and capacitors in the TaunchPad G2 kit are used to build an external clock circuit. If they are directly soldered to the board without modifying the original jumpers on the boar...
1: atmega8a cannot be simulated, but the pins of atmega88 are fully compatible with mega8a, and the resources are similar. You can use 88 for simulation first and then transplant. 2: The 16-bit reg...[Details]
Nissan has developed a hybrid engine with a world-leading thermal efficiency of 50%. Fuel consumption is expected to be improved by 25% compared to the hybrid vehicle (HV) equipped with e-power that ...[Details]
OFweek Cup · OFweek 2023 China
Robot
Industry Annual Selection (abbreviated as OFweek Robot Awards 2023) is jointly organized by OFweek, China's high-tech industry portal, and its authorita...[Details]
Jiwei.com reported that on April 23, Yangjie Technology released its first quarter report of 2021, stating that the company achieved operating income of 942.0913 million yuan, up 93.37% from the same...[Details]
In recent years, fierce competition between liquid crystal displays (LCD) and plasma display panels (PDP) has intensified with the emergence of new technologies. This competition has also led to a dr...[Details]
Introduction
With the increasing use of portable devices and wireless communication systems in real life, the power consumption of design for testability (DFT) has attracted more and more att...[Details]
OFweek Cup · OFweek 2023 China
Robot
Industry Annual Selection (abbreviated as OFweek Robot Awards 2023) is jointly organized by OFweek, China's high-tech industry portal, and its authorita...[Details]
Preface A stepper motor is a brushless motor that converts electrical impulses into mechanical rotation. As the name suggests, it rotates gradually according to the input pulse and is the main execut...[Details]
As the first electric drive company in China to have installed more than 1 million pure electric vehicles , Shanghai Electric Drive Co., Ltd. has entered this field since 2008. From split electric dr...[Details]
The global semiconductor market is weak this year, and TWS headphones are undoubtedly a ray of hope for the entire semiconductor industry. Recently, market research firm Counterpoint Research release...[Details]
Toyota Motor Corp. said on Monday it plans to build a new $1.3 billion battery plant in the United States as the Japanese automaker steps up research and development and production of key components ...[Details]
The frequency calculation formula of the PWM wave generated by the output comparison mode of the timer is: 72M/((2*(arr+1))*(psc+1) ) For example, if you set: PWM_Init(1000-1,72-1); (PWM_Init(arr,p...[Details]
With the continuous development of cockpit hardware and software technology, the design of smart cockpits is also evolving, from focusing on functional needs to focusing on "user experience". Smart c...[Details]
/* Name: STM32 SPI serial line and HC595 use illustrate: SPI: Serial Peripheral Interface is a high-speed full-duplex communication bus. It is widely used between ADC, LCD and other devices and M...[Details]
On October 23, Honor officially released the industry's first personalized full-scenario AI operating system equipped with intelligent body - MagicOS 9.0 at the MagicOS 9.0 press conference and dev...[Details]
Analogue and Mixed Signal
京公网安备 11010802033920号
EEWORLD
