(1) The Zener impedance is derived from the 1KHZ AC volt age which results when an AC current having an RMS value equal to 10% of the Zener current (IZTor IZK)
is superim posed on IZT or IZK. Zener impedance is m easured at two points to insure a sharp knee on the breakdown curve and to eliminate unstable units.
(2) Valid provided that electrodes at a distance of 10mm from case are kept at ambient temperature.
(3) Tested under thermal equilibrium and DC test conditions.
REV:B
QW-BZ010
Page 2
Surface Mount Zener Diodes
SMD Diodes Specialist
RATING AND CHARACTERISTIC CURVES (CZRL5225-G Thru. CZRL5267-G)
[i=s]This post was last edited by arilink on 2022-5-14 17:04[/i]LVGL stands for Light and Versatile Graphics Library. It is a free, open-source GUI library with exquisite interface, low resource consu...
This article explains how to use the human body sensing module HC SR505. We use an LED to indicate whether a person has walked into the sensor. When a person walks in, the LED indicator lights up, and...
Preface: VScode is already available on the computer, and ESP32 development is perfectly supported on VScode. Next, use VScode to install the esp32 development environment.VSCode official website addr...
Several states of microcontroller IO port output1. What are the differences between the open-drain output and open-drain multiplexed output of a microcontroller?2. What are the differences between the...
As shown in the figure below, when I import the BOM, there are obviously many components with different values. Why are they not distinguished? If I want to separate them, how should I do it? Please h...