ULTRA SMALL PACKAGE VOLTAGE
REGULATOR
RX5RW SERIES
OUTLINE
The RX5RW Series are CMOS-based voltage regulator ICs with high accuracy output voltage and
ultra-low supply current developed. Each of these ICs consists of a driver transistor, a voltage refe r-
ence unit, an error amplifier, resistors for setting output volt-age and a current limit circuit.
The output voltage of these ICs is fixed with high accuracy.
Even if V
OUT
is shorted to GND, the included current limit circuit protects the ICs from the destruc-
tion. Furthermore, RX5RWxxA/B have a chip enable function, so that the supply current on standby
can be minimized.
Since the package s for these ICs are SC-82AB (Super Mini-mold) package and SON1612-6(Under
Development), high de nsity mounting of the ICs on boards is possible.
FEATURES
•
Ultra-Low Supply Current ..................................Typ. 1.5µA
(except pull-up/pull-down current for C E /CE pin)
•
Standby Current .................................................Typ. 0.1µA
•
Dropout Voltage ..................................................Typ. 40mV (I
OUT
=1mA, RX5RW30A/B)
•
Low Temperature-Drift Coefficient of Output Voltage
•
High Accuracy Output Voltage ...........................±2.0%
•
Ultra-Small Package ...........................................SC-82AB, SON1612-6(Under Development)
•
Built-in Current Limit Circuits
Typ. ±100ppm/°C
•
Excellent Line Regulation ...................................Typ. 0.05%/V
APPLICATIONS
•
Power source for battery-powered equipment.
•
Power source for cameras, VCRs, camcorders, hand-held audio instruments and hand-held commu-
nication equipment.
•
Precision voltage references.
1
RX5RW
BLOCK DIAGRAM S
RQ5RWxxA
RQ5RWxxB
RQ5RWxxC
SELECTION GUIDE
The output voltage, the active type, and the packing type for the ICs can be selected at the user's
request. The selection can be made with designating the part number as shown below:
RX5RW xxxx-xx
←Part
Number
↑
a
Code
a
b
c
Designation of Package Type
Q: SC82-AB D:SON1612-6(Under Development)
Setting Output Voltage (V
OUT
):
Stepwise setting with a step of 0.1V in the range of 1.5V to 6.0V is possible.
Designation of Chip enable Active Type:
A: “L” active type
C: no chip enable type
B: “H” active type
Designation of Packing Type:
A: Taping
B: Antistatic bag (for Sample only)
Designation of Taping Type: TR (refer to Taping Specifications)
↑ ↑↑ ↑
b cd e
Contents
d
e
2
RX5RW
ABSOLUTE MAXIMUM RATINGS
Symbol
V
IN
V
CE
V
OUT
I
OUT
P
D
Input Voltage
Input Voltage for
CE
/CE Pin
Output Voltage
Output Current
Power Dissipation(SC82-AB)
Power Dissipation(SON1612-6)-
(Under development)
Topt
Tstg
Operating Temperature
Storage Temperature
Item
Rating
9
-0.3 to V
IN
+0.3
-0.3 to V
IN
+0.3
150
150
500
*Note1
–40 to +85
–55 to +125
mW
Unit
V
V
V
mA
°C
°C
*Note 1: This specification is at mounted on board.
P
D
depends on conditions of mounting on board. This specification is based on the measure-
ment at the condition below:
*Measurement Conditions
Environment: Mounted on board (Wind velocity 0m/s)
Board Material: FR-4 (2-layer)
Board dimensions: 40mm x 40mm x t1.6mm
Copper Area: 50%
700
600
500
400
P
D
(mW)
300
200
100
0
0
25
50
75
100
125
Temperature Topt(°C)
4
RX5RW
ABSOLUTE MAXIMUM RATINGS
Absolute Maximum ratings are threshold limit values that must not be exceeded even for an instant
under any conditions. Moreover, such values for any two items must not be reached simultaneously.
Operation above these absolute maximum ratings may cause degradation or permanent damage to
the device. These are stress ratings only and do not necessarily imply functional operation below
these limits.
5
Microcontroller MCU
京公网安备 11010802033920号
EEWORLD
