TC1303A-SO2EUN datasheet, PDF - EEWORLD Datasheet

Datasheet> All Categories > Power/power management> The power supply circuit> TC1303A-SO2EUN

TC1303A-SO2EUN: Description0.5 A SWITCHING REGULATOR, 2400 kHz SWITCHING FREQ-MAX, PDSO10, PLASTIC, MO-187, MSOP-10; CategoryPower/power management The power supply circuit; File Size757KB，38 Pages; ManufacturerMicrochip; Websitehttps://www.microchip.com; Environmental Compliance

Download Datasheet Parametric View All

TC1303A-SO2EUN Overview

0.5 A SWITCHING REGULATOR, 2400 kHz SWITCHING FREQ-MAX, PDSO10, PLASTIC, MO-187, MSOP-10

TC1303A-SO2EUN Parametric

Parameter Name	Attribute value
Is it lead-free?	Lead free
Is it Rohs certified?	conform to
Parts packaging code	TSSOP
package instruction	TSSOP,
Contacts	10
Reach Compliance Code	compliant
ECCN code	EAR99
Other features	AUTOMATIC PWM TO PFM MODE
Analog Integrated Circuits - Other Types	SWITCHING REGULATOR
control mode	CURRENT-MODE
Control Technology	PULSE WIDTH MODULATION
Maximum input voltage	5.5 V
Minimum input voltage	2.7 V
Nominal input voltage	3.6 V
JESD-30 code	S-PDSO-G10
JESD-609 code	e3
length	3 mm
Humidity sensitivity level	1
Number of functions	1
Number of terminals	10
Maximum operating temperature	85 °C
Minimum operating temperature	-40 °C
Maximum output current	0.5 A
Package body material	PLASTIC/EPOXY
encapsulated code	TSSOP
Package shape	SQUARE
Package form	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
Peak Reflow Temperature (Celsius)	260
Certification status	Not Qualified
Maximum seat height	1.1 mm
surface mount	YES
Switch configuration	BUCK
Maximum switching frequency	2400 kHz
Temperature level	INDUSTRIAL
Terminal surface	Matte Tin (Sn)
Terminal form	GULL WING
Terminal pitch	0.5 mm
Terminal location	DUAL
Maximum time at peak reflow temperature	40
width	3 mm
Base Number Matches	1

Preview

Download Datasheet

View All

TC1303A/TC1303B/

TC1303C/TC1304

500 mA Synchronous Buck Regulator,

+ 300 mA LDO with Power-Good Output

Features

• Dual-Output Regulator (500 mA Buck Regulator

and 300 mA Low-Dropout Regulator)

• Power-Good Output with 300 ms Delay

• Total Device Quiescent Current = 65 µA, Typical

• Independent Shutdown for Buck and LDO

Outputs (TC1303)

• Both Outputs Internally Compensated

• Synchronous Buck Regulator:

- Over 90% Typical Efficiency

- 2.0 MHz Fixed-Frequency PWM

(Heavy Load)

- Low Output Noise

- Automatic PWM to PFM mode transition

- Adjustable (0.8V to 4.5V) and Standard

Fixed-Output Voltages (0.8V, 1.2V, 1.5V,

1.8V, 2.5V, 3.3V)

• Low-Dropout Regulator:

- Low-Dropout Voltage = 137 mV Typical @

200 mA

- Standard Fixed-Output Voltages

(1.5V, 1.8V, 2.5V, 3.3V)

• Power-Good Function:

- Monitors Buck Output Function (TC1303A)

- Monitors LDO Output Function (TC1303B)

- Monitors Both Buck and LDO Output

Functions (TC1303C

and TC1304)

- 300 ms Delay Used for Processor Reset

• Sequenced Startup and Shutdown (TC1304)

• Small 10-pin 3x3 DFN or MSOP Package Options

• Operating Junction Temperature Range:

- -40°C to +125°C

• Undervoltage Lockout (UVLO)

• Output Short Circuit Protection

• Overtemperature Protection

Description

The

TC1303/TC1304

combines

500 mA

synchronous buck regulator and 300 mA Low-Dropout

Regulator (LDO) with a power-good monitor to provide

a highly integrated solution for devices that require

multiple supply voltages. The unique combination of an

integrated buck switching regulator and low-dropout

linear regulator provides the lowest system cost for

dual-output voltage applications that require one lower

processor core voltage and one higher bias voltage.

The 500 mA synchronous buck regulator switches at a

fixed frequency of 2.0 MHz when the load is heavy,

providing a low noise, small-size solution. When the

load on the buck output is reduced to light levels, it

changes operation to a Pulse Frequency Modulation

(PFM) mode to minimize quiescent current draw from

the battery. No intervention is necessary for smooth

transition from one mode to another.

The LDO provides a 300 mA auxiliary output that

requires a single 1 µF ceramic output capacitor,

minimizing board area and cost. The typical dropout

voltage for the LDO output is 137 mV for a 200 mA

load.

For the TC1303/TC1304, the power-good output is

based on the regulation of the buck regulator output, the

LDO output or the combination of both. The TC1304

features start-up and shutdown output sequencing.

The TC1303/TC1304 is available in either the 10-pin

DFN or MSOP package.

Additional protection features include: UVLO,

overtemperature and overcurrent protection on both

outputs.

For a complete listing of TC1303/TC1304 standard

parts, consult your Microchip representative.

Applications

•

Cellular Phones

Portable Computers

USB-Powered Devices

Handheld Medical Instruments

Organizers and PDAs

2008 Microchip Technology Inc.

DS21949C-page 1

Recommended Resources

Teach you how to calculate differential pressure liquid level measurement range

TDA2030A power amplifier circuit diagram

NJM2177A application circuit

Analog switching circuit

Constant current source charging sawtooth wave circuit

Computer motherboard circuit diagram 820 1_21

Four major reasons for the heating of power modules: [p=null, 2, left][color=rgb(63, 63, 63)][font="][size=14px]When you touch the surface of the power module[color=#868686], it feels hot. Is the module broken? Wait a minute, it is a little hot, just be...; 仪商城 Integrated technical exchanges

[Erha Image Recognition Artificial Intelligence Vision Sensor] 3. Serial communication with the processor: I originally planned to use the I2C interface of the imx6ull development board to conduct a communication experiment with Erha Image Recognition. I happened to be using the serial port communication o...; dql2016 Domestic Chip Exchange

(Paid Purchase) SSRP-7.25 Motherboard PCB: (Paid purchase) The SSRP-7.25 motherboard PCBhas been around for more than 10 years. I wonder if the PCB can still be found!If you have a PCB, please contact me. I would be grateful.Q 3099609494...; ssrp107 PCB Design

LCR parallel resonance: Why is the Q of an actual LCR parallel resonant circuit W0L/R? While the Q of an ideal LCR parallel resonant circuit is R/W0L?...; msddw Analog electronics

How to implement the 0-10V circuit of the inverter and motor speed control interface?: How to implement the 0-10V circuit of the inverter and motor speed control interface?How competitive is this GP9301/GP8101 solution?...; zjqmyron Motor Drive Control（Motor Control）

BLE over-the-air upgrade: TI CC2541 supports multiple hardware and software to perform air upgrades on it. There are different combinations of hardware.Currently available software includesIt is relatively easy to get the hard...; 灞波儿奔 Wireless Connectivity

Shortcut: L0 L1 L2 L3 L4 L5 L6 L7 L8 L9 LA LB LC LD LE LF LG LH LI LJ LK LL LM LN LO LP LQ LR LS LT LU LV LW LX LY LZ M0 M1 M2 M3 M4 M5 M6 M7 M8 M9 MA MB MC MD ME MF MG MH MI MJ MK ML MM MN MO MP MQ MR MS MT MU MV MW MX MY MZ N0 N1 N2 N3 N4 N5 N6 N7 N8 NA NB NC ND NE NF NG NH NI NJ NK NL NM NN NO NP NQ NR NS NT NU NV NX NZ O0 O1 O2 O3 OA OB OC OD OE OF OG OH OI OJ OK OL OM ON OP OQ OR OS OT OV OX OY OZ P0 P1 P2 P3 P4 P5 P6 P7 P8 P9 PA PB PC PD PE PF PG PH PI PJ PK PL PM PN PO PP PQ PR PS PT PU PV PW PX PY PZ Q1 Q2 Q3 Q4 Q5 Q6 Q8 Q9 QA QB QC QE QF QG QH QK QL QM QP QR QS QT QV QW QX QY R0 R1 R2 R3 R4 R5 R6 R7 R8 R9 RA RB RC RD RE RF RG RH RI RJ RK RL RM RN RO RP RQ RR RS RT RU RV RW RX RY RZ

Popular Components