SM-6C-D-I-TL-26

One diode makes fluorescent lamps start quickly at low temperatures Ordinary fluorescent lamps are difficult to start at voltages of 200-170V or in winter. If a diode is added to the flu...[Details]

We have talked a lot about some technologies and concepts related to autonomous driving before, but most of them are discussions centered around intelligent driving. There is one concept that has not...[Details]

1. The interrupt system diagram of the PIC microcontroller is shown below The interrupt to the CPU on the far right of the diagram refers to the generation of a CPU interrupt request. The CPU will ...[Details]

In the past two years, the sudden rise of LCD splicing display products in the domestic large-screen splicing curtain wall market has become a major highlight in the industry. As a new large-screen...[Details]

This article introduces: This article first analyzes the measurement principle and characteristics of the radar level meter, and introduces the selection and installation of the radar level meter and ...[Details]

Xie Xiangwei, director of the New Display Technology Department of TCL Industrial Research Institute, said at the "2020 Micro-LED Industry Technology Summit" held at CITE that as costs fall in the fu...[Details]

In a multi-voltage rail environment, power sequencing has always been an important topic of concern. During the voltage rise and fall process, devices such as digital signal processors (DSPs), fi...[Details]

Panasonic has developed new image sensor technology that can improve the car's night vision system and enhance the safety of night driving. It is understood that near-infrared light is invisible...[Details]

(1) Drive control circuit The drive control circuit is composed of U1 (BIT3106) and its peripheral components. When the lamp needs to be lit, the ON/OFF signal output by the microcontrolle...[Details]

【Molex】Molex launches new Percept current sensor for industrial and automotive applications, designed to increase design flexibility and simplify system integration complexity T...[Details]

On April 29, China Southern Power Grid held a meeting of the Cybersecurity and Digital Grid Construction Leading Group to study and review the "Company Digital Transformation and Digital Grid Const...[Details]

　　0 Introduction 　　The basic requirement for the MCU experiment system is that multiple projects can be tested on limited IO interfaces. In order to achieve this basic requirement, when conducting ...[Details]

Based on the wavelet multi-resolution analysis theory, a new method is proposed to distinguish the transformer excitation inrush current and internal short-circuit current by using the ratio of energy...[Details]

     Abstract: This paper introduces a real-time detection method of gaps in mechanical transmission and its specific implementation circuit. The circuit has a compact structure and a reasonable and ...[Details]

The development of technologies such as artificial intelligence (AI), cloud computing, and edge computing is driving innovation and upgrading in all walks of life. This process is also accompanie...[Details]