Positronic Industries
connectpositronic.com
PROFESSIONAL / INDUSTRIAL QUALITY
FIXED AND REMOVABLE CONTACTS
HIGH DENSITY D-SUBMINIATURE
D
-
S
ub
Size 22 Contacts,
Removable Crimp and
Solder Printed Board Mount
Two Performance Levels For
Best Cost / Performance Ratio
U.L. Recognized
File #E49351
CSA Recognized
File #LR54219
Telecommunication
U.L. File #14098
Di
rec
tive
2002
/9
ODD SERIES TECHNICAL CHARACTERISTICS
MATERIALS AND FINISHES:
Insulators:
Glass filled polyester per MIL-M-24519, UL
94V-0, black color.
Contacts:
Precision machined copper alloy.
Contact Plating:
Professional quality - gold flash over nickel plate.
Other finishes available upon request.
Shells:
Steel or brass with tin plate; zinc plate with
chromate seal, stainless steel passivated.
Other materials and finishes available upon
request.
Mounting Spacers:
Nylon; copper alloy or steel with zinc plate and
chromate seal or tin plate; phosphor bronze
with tin plate; stainless steel, passivated.
Vibration Lock Systems:
Slide lock and lock tabs, steel with nickel
plate.
Push-On Fasteners:
Phosphor bronze or beryllium copper with tin plate.
Jackscrew Systems:
Brass or steel with zinc plate and chromate
seal or clear zinc plate or tin plate; stainless
steel, passivated.
Hoods:
Composite and plastic, UL 94V-0; brass or
steel with zinc plate and chromate seal; alu-
minum or aluminum with electroless nickel
plate; die cast zinc.
Non-magnetic versions are available, contact Technical Sales.
Contact Terminations:
Closed barrel crimp, wire sizes 22 AWG
[0.3mm
2
] through 30 AWG [0.05mm
2
]. Solder
cup wire, 0.035 inch [0.89mm] hole diameter
for 22 AWG [0.3mm
2
] wire maximum.
0.020 inch [0.5mm] or 0.030 inch [0.76mm] ter-
mination diameter straight and Right Angle (90°)
printed board mount contact terminations.
Male shells may be dimpled for EMI/ESD ground
paths.
Trapezoidally shaped shells and polarized
jackscrews.
Shells:
Polarization:
Mounting To
Angle Brackets:
Jackscrews and riveted fasteners with 0.120
inch [3.05mm] clearance hole, and threaded
riveted fasteners with 4-40 threads and nylon
lock inserts.
Mounting To Printed Board:
Rapid installation push-on fasteners and
mounting posts.
Locking Systems:
Jackscrews and vibration locking systems.
Mechanical Operations:
500 operations minimum per IEC 60512-5 for
open entry female contact.
1000 operations minimum per IEC 60512-5 for
PosiBand closed entry female contact.
ELECTRICAL CHARACTERISTICS:
Contact Current Rating:
5 amperes nominal for open entry
10 amperes for closed entry. Tested per U.L.
1977, six contacts energized.
See tempera-
ture rise curve on page 2 for details.
0.010 ohms maximum for open entry.
0.005 ohms maximum for closed entry.
1000 V r.m.s.
5 G ohms.
0.042 inch [1.06mm].
300 V r.m.s.
MECHANICAL CHARACTERISTICS:
Removable Contacts:
Insert contact to rear face of insulator and
release from rear face of insulator. Size 22
contact, male - 0.030 inch [0.76mm] mating
diameter. Female contacts - rugged “Robi-D”
open entry design or PosiBand closed entry
design, see page 1 for details.
Female open entry contacts - both rugged
Robi-D design and standard design available
to customer requirements. Closed entry con-
tacts are PosiBand design, see page 1 for
details.
9 lbs. [40 N].
Initial Contact Resistance:
Proof Voltage:
Insulator Resistance:
Clearance and Creepage
Distance [minimum]:
Working Voltage:
Fixed Contacts, Board
Mounted Applications:
Contact Retention
In Insulator:
CLIMATIC CHARACTERISTICS:
Temperature Range:
Damp Heat, Steady State:
-55°C to +125°C.
10 days.
43
DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
5/
ODD series connectors are low cost quality high density con-
nectors recommended for use in sheltered, non-corrosive
indoor environments having normal ventilation.
ODD series connectors utilize precision machined, remov-
able contacts having closed barrel crimp terminations and sol-
der cup wire terminations. For printed board mount application,
straight solder printed board mount and right angle (90°) angled
solder terminations are available.
Six standard contact variants are offered in arrangements of
15, 26, 44, 62, 78, and 104 contacts. ODD series connectors
are mateable and compatible with other high density D-sub-
miniature connectors conforming to MIL-DTL-24308, and are
U.L. and CSA recognized.
A wide variety of unique accessories are available.
EC
RoHS
Compliant
IT
R
O
NIC
INDU
S
TR
POS
IES
For RoHS options
see page 52.
•
pe
•
U
rE
ODD SERIES
D
-
S
ub
PROFESSIONAL / INDUSTRIAL QUALITY
FIXED AND REMOVABLE CONTACTS
HIGH DENSITY D-SUBMINIATURE
CONTACT VARIANTS
FACE VIEW OF MALE OR REAR VIEW OF FEMALE
Positronic Industries
connectpositronic.com
1
6
11
10
5
10
1
18
26
9
1
16
31
44
15
30
15
19
ODD 15
1
1
22
43
62
21
21
42
40
60
ODD 26
1
20
39
59
78
64
85
22
43
ODD 44
21
42
63
84
104
ODD 62
ODD 78
ODD 104
STANDARD SHELL ASSEMBLY
B
B1
M
K
G
0.050±0.010
[1.27±0.25]
10° Typ.
E
D1
D
0.036±0.008
[0.91±0.20]
H
C
A
0.375 [9.53]*
Max.
Ø0.120±0.005 [Ø3.05±0.13]
Mounting hole, two places
* This dimension is for crimp removable connectors. 0.220 [5.59] maximum for all other connectors.
OPTIONAL SHELL ASSEMBLY [0, 02]
OPTIONAL SHELL ASSEMBLY
WITH UNIVERSAL FLOAT MOUNTS [F]
0.120±0.010 [3.08±0.25]
Ø0.120±0.005 [Ø3.05±0.13]
Mounting hole, two places
for stainless steel shell (0 option)
Ø0.154 [3.91] Mounting hole,
two places (02 option)
0.032 [0.81]
Total diametral float
Ø0.086+0.005 Ø2.18+0.13
-0.00
-0.000
Mounting hole, two places
[
]
CONNECTOR
VARIANT SIZES
ODD 15 M
ODD 15 F
ODD 15 S
ODD 26 M
ODD 26 F
ODD 26 S
ODD 44 M
ODD 44 F
ODD 44 S
ODD 62 M
ODD 62 F
ODD 62 S
ODD 78 M
ODD 78 F
ODD 78 S
ODD 104 M
ODD 104 F
ODD 104 S
1.213
[30.81]
1.213
[30.81]
1.541
[39.14]
1.541
[39.14]
2.088
[53.04]
2.088
[53.04]
2.729
[69.32]
2.729
[69.32]
2.635
[66.93]
2.635
[66.93]
2.729
[69.32]
2.729
[69.32]
0.666
[16.92]
0.643
[16.33]
0.994
[25.25]
0.971
[24.66]
1.534
[38.96]
1.511
[38.38]
2.182
[55.42]
2.159
[54.84]
2.079
[52.81]
2.064
[52.43]
2.212
[56.18]
2.189
[55.60]
0.984
[24.99]
0.984
[24.99]
1.312
[33.32]
1.312
[33.32]
1.852
[47.04]
1.852
[47.04]
2.500
[63.50]
2.500
[63.50]
2.406
[61.11]
2.406
[61.11]
2.500
[63.50]
2.500
[63.50]
0.329
[8.36]
0.311
[7.90]
0.329
[8.36]
0.311
[7.90]
0.329
[8.36]
0.311
[7.90]
0.329
[8.36]
0.311
[7.90]
0.441
[11.20]
0.423
[10.74]
0.503
[12.78]
0.485
[12.32]
0.494
[12.55]
0.494
[12.55]
0.494
[12.55]
0.494
[12.55]
0.494
[12.55]
0.494
[12.55]
0.494
[12.55]
0.494
[12.55]
0.605
[15.37]
0.605
[15.37]
0.668
[16.97]
0.668
[16.97]
0.759
[19.28]
0.759
[19.28]
1.083
[27.51]
1.083
[27.51]
1.625
[41.28]
1.625
[41.28]
2.272
[57.71]
2.272
[57.71]
2.178
[55.32]
2.178
[55.32]
2.302
[58.47]
2.302
[58.47]
0.422
[10.72]
0.422
[10.72]
0.422
[10.72]
0.422
[10.72]
0.422
[10.72]
0.422
[10.72]
0.422
[10.72]
0.422
[10.72]
0.534
[13.56]
0.534
[13.56]
0.596
[15.14]
0.596
[15.14]
0.233
[5.92]
0.243
[6.17]
0.233
[5.92]
0.243
[6.17]
0.230
[5.84]
0.243
[6.17]
0.230
[5.84]
0.243
[6.17]
0.230
[5.84]
0.243
[6.17]
0.230
[5.84]
0.243
[6.17]
0.422
[10.72]
0.429
[10.90]
0.422
[10.72]
0.429
[10.90]
0.426
[10.82]
0.429
[10.90]
0.426
[10.82]
0.429
[10.90]
0.426
[10.82]
0.429
[10.90]
0.426
[10.82]
0.429
[10.90]
DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
44
ODD SERIES
A
±0.015
[0.38]
B
±0.005
[0.13]
B1
±0.005
[0.13]
C
±0.005
[0.13]
D
±0.005
[0.13]
D1
±0.005
[0.13]
E
±0.015
[0.38]
G
±0.010
[0.25]
H
±0.010
[0.25]
K
±0.005
[0.13]
M
±0.010
[0.25]
Positronic Industries
connectpositronic.com
PROFESSIONAL / INDUSTRIAL QUALITY
FIXED AND REMOVABLE CONTACTS
HIGH DENSITY D-SUBMINIATURE
REMOVABLE CRIMP CONTACTS
CODE 1
CONTACTS MAY BE SUPPLIED WITH CONNECTOR OR ORDERED SEPARATELY.
CLOSED CRIMP BARREL
D
-
S
ub
Note: Connectors can be kitted with
all applicable crimp contacts,
contact Technical Sales for
connector part number.
FEMALE CONTACT
A
ØC
MALE CONTACT
A
ØB
ØB
0.150 [3.81]
Ø0.030
[0.76]
0.150 [3.81]
ØC
Part Number: FC8122D
FEMALE
PART NUMBER
Part Number: MC8122D
ØB
0.035
[0.89]
ØC
0.047
[1.19]
WIRE SIZE
AWG/[mm
2
]
22 / 24 / 26 / 28 / 30
[0.3/0.25/0.12/0.08/0.05]
A
0.529
[13.44]
MALE
PART NUMBER
WIRE SIZE
AWG/[mm
2
]
22 / 24 / 26 / 28 / 30
[0.3/0.25/0.12/0.08/0.05]
A
0.531
[13.49]
ØB
0.035
[0.89]
ØC
0.047
[1.19]
FC8122D
MC8122D
PLATING:
STANDARD FINISH:
Gold flash over nickel plate.
OPTIONAL FINISHES:
0.000030 [0.76] gold over nickel by adding “-14” suffix onto part number. Example: FC8122D-14
0.000050 inch [1.27] gold over nickel by adding “-15” suffix onto part number. Example: MC8122D-15
REMOVABLE CRIMP CONTACTS
CODE 1
CONTACTS MAY BE SUPPLIED WITH CONNECTOR OR ORDERED SEPARATELY.
CLOSED CRIMP BARREL
FEMALE CONTACT
“CLOSED ENTRY” DESIGN
Ø0.047
[1.19]
0.520 [13.21]
Note: Connectors can be kitted with
all applicable crimp contacts,
contact Technical Sales for
connector part number.
ODD SERIES
45
DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
Ø0.035
[0.89]
0.150 [3.81]
FEMALE
PART NUMBER
WIRE SIZE
AWG/[mm
2
]
22 / 24 / 26 / 28 / 30
[0.3/0.25/0.12/0.08/0.05]
FC8022D2
PLATING:
STANDARD FINISH:
Gold flash over nickel plate.
OPTIONAL FINISHES:
0.000030 [0.76 Ì] gold over nickel by adding “-14” suffix onto part number. Example: FC8022D2-14
0.000050 inch [1.27] gold over nickel by adding “-15” suffix onto part number. Example: FC8022D2-15
For information regarding crimp tool and crimping tool techniques, see Application Tools section, pages 78-83.
D
-
S
ub
PROFESSIONAL / INDUSTRIAL QUALITY
FIXED AND REMOVABLE CONTACTS
HIGH DENSITY D-SUBMINIATURE
Positronic Industries
connectpositronic.com
The crimp area of this contact is not
protected when fully seated in the
connector molding. These contacts
require shrink tubing after installation.
Not suitable for fully loaded connector.
REMOVABLE CRIMP CONTACTS
20 AWG CONTACTS
20 AWG [0.5 mm
2
]
Note: Connectors can be kitted with
all applicable crimp contacts,
contact Technical Sales for
connector part number.
CONTACTS MAY BE SUPPLIED WITH CONNECTOR OR ORDERED SEPARATELY.
*FEMALE CONTACT
A
ØC
MALE CONTACT
A
ØB
ØB
0.179
[4.55]
Ø0.030±0.001
[0.75±0.03]
Part Number: FC8120D
WIRE SIZE
AWG/[mm
2
]
20
max
[0.5]
A
0.852
[21.64]
ØB
0.045
[1.14]
ØC
0.066
[1.68]
Part Number: MC8020D
MALE
PART NUMBER
0.179
[4.55]
ØC
FEMALE
PART NUMBER
WIRE SIZE
AWG/[mm
2
]
20
max
[0.5]
A
0.853
[21.66]
ØB
0.045
[1.14]
ØC
0.066
[1.68]
FC8120D
MC8020D
* FEMALE POSIBAND CLOSED ENTRY CONTACTS ARE AVAILABLE, SEE PAGE 56 FOR DETAILS.
PLATING:
STANDARD FINISH:
Gold flash over nickel plate.
OPTIONAL FINISHES:
0.000030 [0.76] gold over nickel by adding “-14” suffix onto part number. Example: FC8120D-14
0.000050 inch [1.27] gold over nickel by adding “-15” suffix onto part number. Example: MC8020D-15
REMOVABLE THERMOCOUPLE CONTACTS
CONTACTS MAY BE SUPPLIED WITH CONNECTOR OR ORDERED SEPARATELY.
FEMALE CONTACT
“CLOSED ENTRY” DESIGN
0.520 [13.21]
Ø0.047
[1.19]
* Color Code
MALE CONTACT
0.531 [13.49]
* Color Code
Ø0.047
[1.19]
Ø0.035
[0.89]
0.150 [3.81]
Ø0.030
[0.76]
0.150 [3.81]
Ø0.035
[0.89]
TYPE
MATERIAL
CHROMEL (+)
FEMALE
PART NUMBER
MALE
PART NUMBER
COLOR
CODE*
WHITE
GREEN
RED
YELLOW
WHITE
YELLOW
WIRE SIZE
AWG [mm
2
]
22 / 24 / 26
[ 0.3 / 0.25 / 0.12]
22 / 24 / 26
[ 0.3 / 0.25 / 0.12]
22 / 24 / 26
[ 0.3 / 0.25 / 0.12]
22 / 24 / 26
[ 0.3 / 0.25 / 0.12]
22 / 24 / 26
[ 0.3 / 0.25 / 0.12]
22 / 24 / 26
[ 0.3 / 0.25 / 0.12]
FC8022D2CH
FC8022D2AL
FC8022D2CU
FC8022D2CO
FC8022D2CH
FC8022D2CO
MC8022DCH
MC8022DAL
MC8022DCU
MC8022DCO
MC8022DCH
MC8022DCO
K
ALUMEL (-)
COPPER (+)
T
CONSTANTAN (-)
CHROMEL (+)
E
CONSTANTAN (-)
For more information on the availability
of Type J thermocouple contacts,
please contact Technical Sales.
For more information about
thermocouple contacts with PCB
solder termination, please contact
Technical Sales..
Chromel
®
and Alumel
®
are registered trademarks
of Hoskins Manufacturing Company
For information regarding crimp tool and crimping tool techniques, see Application Tools section, pages 78-83.
DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
46
ODD SERIES
Note: Connectors can be kitted with
all applicable crimp contacts,
contact Technical Sales for
connector part number.
Positronic Industries
connectpositronic.com
PROFESSIONAL / INDUSTRIAL QUALITY
FIXED AND REMOVABLE CONTACTS
HIGH DENSITY D-SUBMINIATURE
REMOVABLE SOLDER CUP CONTACTS
CODE 2
CONTACTS MAY BE SUPPLIED WITH CONNECTOR OR ORDERED SEPARATELY.
Note: Connectors can be kitted with
all applicable crimp contacts,
contact Technical Sales for
connector part number.
D
-
S
ub
FEMALE CONTACT
0.529 [13.44]
MALE CONTACT
0.531 [13.48]
ø0.047
[1.20]
Ø0.047
[1.20]
Ø0.035
[0.90]
0.150 [3.81]
ø0.030
[0.77]
0.150 [3.81]
ø0.035
[0.88]
Part Number: FS8122D
Part Number: MS8122D
PLATING:
STANDARD FINISH:
Gold flash over nickel plate.
OPTIONAL FINISHES:
0.000030 [0.76] gold over nickel by adding “-14” suffix onto part number. Example: FS8112D-14
0.000050 inch [1.27] gold over nickel by adding “-15” suffix onto part number. Example: MS8112D-15
REMOVABLE SOLDER CUP CONTACTS
CODE 2
CONTACTS MAY BE SUPPLIED WITH CONNECTOR OR ORDERED SEPARATELY.
Note: Connectors can be kitted with
all applicable crimp contacts,
contact Technical Sales for
connector part number.
FEMALE CONTACT
“CLOSED ENTRY” DESIGN
Ø0.047
[1.19]
0.520 [13.21]
ODD SERIES
47
DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
Ø0.035
[0.89]
0.150 [3.81]
FEMALE
PART NUMBER
WIRE SIZE
AWG/[mm
2
]
20 [0.5] max
FS8022D2
PLATING:
STANDARD FINISH:
Gold flash over nickel plate.
OPTIONAL FINISHES:
0.000030 [0.76] gold over nickel by adding “-14” suffix onto part number. Example: FS8022D2-14
0.000050 inch [1.27] gold over nickel by adding “-15” suffix onto part number. Example: FS8022D2-14
For information regarding crimp tool and crimping tool techniques, see Application Tools section, pages 78-83.
RF/Wirelessly
京公网安备 11010802033920号
EEWORLD
