3.0 Pin Information ................................................................................................................................................................................ 7
4.0 Battery Charging Support ............................................................................................................................................................. 17
6.0 DC Parameters ............................................................................................................................................................................. 39
7.0 AC Specifications .......................................................................................................................................................................... 44
8.0 Package Marking Information ....................................................................................................................................................... 46
9.0 Package Information ..................................................................................................................................................................... 48
Appendix C: Data Sheet Revision History .......................................................................................................................................... 52
The Microchip Web Site ...................................................................................................................................................................... 54
Customer Change Notification Service ............................................................................................................................................... 54
Customer Support ............................................................................................................................................................................... 54
Product Identification System ............................................................................................................................................................. 55
2010 - 2015 Microchip Technology Inc.
DS00001692C-page 3
USB251xB/xBi
1.0
INTRODUCTION
The Microchip USB251xB/xBi hub family is a group of low-power, configurable, MTT (multi transaction translator) hub
controller ICs. The hub provides downstream ports for embedded USB solutions and is fully compliant with the
USB 2.0
Specification
[1]. Each of the hub controllers can attach to an upstream port as a full-speed or full-/hi-speed hub. The
hub can support low-speed, full-speed, and hi-speed downstream devices when operating as a hi-speed hub.
All required resistors on the USB ports are integrated into the hub. This includes all series termination resistors and all
required pull-down and pull-up resistors on D+ and D- pins. The over-current sense inputs for the downstream facing
ports have internal pull-up resistors.
The USB251xB/xBi hub family includes programmable features, such as:
•
MultiTRAK
TM
Technology:
implements a dedicated Transaction Translator (TT) for each port. Dedicated TTs help
maintain consistent full-speed data throughput regardless of the number of active downstream connections.
•
PortMap:
provides flexible port mapping and disable sequences. The downstream ports of a USB251xB/xBi hub
can be reordered or disabled in any sequence to support multiple platform designs with minimum effort. For any
port that is disabled, the USB251xB/xBi hub controller automatically reorders the remaining ports to match the
USB host controller’s port numbering scheme.
•
PortSwap:
allows direct alignment of USB signals (D+/D-) to connectors to avoid uneven trace length or crossing
of the USB differential signals on the PCB.
•
PHYBoost:
enables 4 programmable levels of USB signal drive strength in downstream port transceivers. PHY-
Boost will also attempt to restore USB signal integrity.
1.1
Configurable Features
The USB251xB/xBi hub controller provides a default configuration that may be sufficient for most applications. Strapping
option pins (see
Section 3.3.1 on page 14)
provide additional features to enhance the default configuration. When the
hub is initialized in the default configuration, the following features may be configured using the strapping options:
•
•
•
•
Downstream non-removable ports, where the hub will automatically report as a compound device
Downstream disabled ports
Enabling of battery charging option on individual ports
The USB251xB/xBi hub controllers can alternatively be configured by an external I
2
C EEPROM or a microcontrol-
ler as an SMBus slave device. When the hub is configured by an I
2
C EEPROM or over SMBus, the following con-
figurable features are provided:
Support for compound devices on a port-by-port basis
Selectable over-current sensing and port power control on an individual or ganged basis to match the circuit board
component selection
Customizable vendor ID, product ID, and device ID
Configurable USB signal drive strength
Configurable USB differential pair pin location
Configurable delay time for filtering the over-current sense inputs
Configurable downstream port power-on time reported to the host
Indication of the maximum current that the hub consumes from the USB upstream port
Indication of the maximum current required for the hub controller
Custom string descriptors (up to 31 characters):
- Product
- Manufacturer
- Serial number
Battery charging USB251xB/xBi products are fully footprint compatible with USB251x/xi/xA/xAi products:
- Pin-compatible
- Direct drop-in replacement
- Use the same PCB components
- USB-IF Compliance by Similarity for ease of use and a complete cost reduction solution
- Product IDs, device IDs, and other register defaults may differ. See
Section 5.1 on page 19
for details.
•
•
•
•
•
•
•
•
•
•
•
DS00001692C-page 4
2010 - 2015 Microchip Technology Inc.
USB251xB/xBi
TABLE 1-1:
Part
Number
USB2512
USB2512i
USB2512A
USB2512Ai
USB2513
USB2513i
USB2514
USB2514i
SUMMARY OF COMPATIBILITIES BETWEEN USB251XB/XBI AND
USB251X/XI/XA/XAI PRODUCTS
Drop-in Replacement
USB2512B
USB2512Bi
USB2512B
USB2512Bi
USB2513B
USB2513Bi
USB2514B
USB2514Bi
Conventions
Within this manual, the following abbreviations and symbols are used to improve readability.
Example
BIT
FIELD.BIT
Description
Name of a single bit within a field
Name of a single bit (BIT) in FIELD
Range from x to y, inclusive
Groups of bits from m to n, inclusive
Pin Name
Binary number (value zzzz)
Hexadecimal number (value zzz)
Hexadecimal number (value zz)
Reserved memory location. Must write 0, read value indeterminate
Instruction code, or API function or parameter
Section or Document name
Don’t care
<> indicate a Parameter is optional or is only used under some conditions
Braces indicate Parameter(s) that repeat one or more times
Brackets indicate a nested Parameter. This Parameter is not real and actually
usb interface IC usb 2.0 high-speed 2 port hub ctrl
IC HUB CTLR 2PORT USB 2.0 HS 36S
IC HUB CTLR 2PORT USB 2.0 HS 36S
USB Hub Controller - USB2.0
Function: Hub controller Protocol category: USB Power supply voltage: 3V ~ 3.6V Interface type: USB Standard: - I2C interface, USB 2.0 high-speed hub control IC
This body fat scale doesn't light up {:1_137:} I pried it open and found so much water {:1_137:} The battery is dead, and it's still wrapped. Does anyone know this battery? There is no voltage when te...
Company Profile: We are a company in Shenzhen that does artificial intelligence in the industrial field. Currently, due to business reasons, we need to consult some industry and technical knowledge ab...
[i=s]This post was last edited by fish001 on 2019-6-4 17:43[/i]The 51 series single-chip microcomputer is a high-performance 8-bit single-chip microcomputer launched by Intel Corporation in the United...
Just now, ASPENCORE, a world-renowned media organization, announced its 2019 "Global Electronics Achievement Award" list in Shenzhen. Qorvo's leading Fusion 5G product portfolio won the Microwave RF c...
In the actual project application process, PLC+HMI (touch screen) is often used in combination. In this section, we will introduce the connection methods of PLC and touch screen in three different ...[Details]
Thermistors are very accurate thermal sensors that indicate temperature through their resistance. If a thermistor is used as a sensor, the temperature can be measured by simply applying a voltage, me...[Details]
1 Purpose and basic principles of battery design
Battery design is to provide working power or power supply with the best performance according to the requirements of instruments and equipment. The...[Details]
Project Overview Baosteel Group Co., Ltd. (hereinafter referred to as Baosteel) is a large-scale steel joint venture established on November 17, 1998, with Baoshan Iron & Steel (Group) Co., Ltd. as t...[Details]
HD-3A energy-saving limited power supply protector is suitable for three-phase low-power protection circuit. It is energy-saving and has low power consumption. It does not consume electricity in th...[Details]
Create the "infrared.c" and "infrared.h" files. 1. Code of infrared.c #include reg52.h #include infrared.h unsigned char irflag = 0; //Infrared receiving flag, set to 1 after receiving a fr...[Details]
Amplification and switching functions. The transistor is composed of a PN structure, and the triode is composed of two PN structures. The shared electrode becomes the base of the triode (indicated ...[Details]
RISC-V, an open-standard instruction set architecture (ISA) conceived by developers at the University of California, Berkeley, in 2010, continues to grow. The RISC in RISC-V stands for Reduced Inst...[Details]
How to make a high-end A4 monitor speaker
This speaker is reasonably designed, simple to make, and has excellent performance. The only drawback is that it is expensive. The high-end A...[Details]
1. Introduction
Timers are widely used in daily life and automated industrial control. In recent years, with the application of single-chip microcomputers in real-time detection and automatic c...[Details]
RIGOL's RS A5000N/3000N series signal analyzers are equipped with a vector network analysis (VNA) mode as standard. The VNA mode can be used to perform full system error correction, compensate for th...[Details]
Recently, the requirements for system computing power and performance have been continuously increasing, whether it is the development of high-end e-sports or AI applications. Therefore, high ...[Details]
ATmega48/88/168 has an on-chip BOD (Brown-out Detection) circuit that detects changes in VCC during operation by comparing it with a fixed trigger level. This trigger level is set by the fuse bit BOD...[Details]
In accordance with the decisions and arrangements of the CPC Central Committee and the State Council, the National Development and Reform Commission has introduced a policy to phase in the reductio...[Details]
In the field of industrial robots, ABB (Asea Brown Boveri) is one of the world's leading manufacturers, and its products are widely used in industries such as automobiles, electronics, and food and...[Details]
PCB Design
京公网安备 11010802033920号
EEWORLD
