6N135/6, HCNW135/6,
HCPL-2502/0500/0501
Single-Channel, High-Speed Optocouplers
Data Sheet
Description
These diode-transistor optocouplers use an insulating layer
between a LED and an integrated photodetector to provide
electrical insulation between input and output. Separate
connections for the photodiode bias and output-transistor
collector increase the speed up to a hundred times that of a
conventional phototransistor coupler by reducing the
base-collector capacitance.
These single channel optocouplers are available in 8-pin DIP,
SO-8, and Widebody package configurations.
The 6N135, HCPL-0500, and HCNW135 are for use in
TTL/CMOS, TTL/LSTTL or wide-bandwidth analog applications.
Current transfer ratio (CTR) for these devices is 7% minimum at
I
F
= 16 mA.
The 6N136, HCPL-2502, HCPL-0501, and HCNW136 are
designed for high-speed TTL/TTL applications. A standard
16-mA TTL sink current through the input LED will provide
enough output current for 1 TTL load and a 5.6 k pull-up
resistor. CTR for these devices is 19% minimum at I
F
=16 mA.
Features
High speed: 1 Mb/s
TTL compatible
Available in 8-pin DIP, SO-8, widebody packages
Open collector output
Safety approval
UL Recognized – 3750 V
rms
for 1 minute (5000 V
rms
for
1 minute for HCNW and Option 020 devices) per UL1577
CSA Approved
IEC/EN/DIN EN 60747-5-5 Approved
V
IORM
= 567V peak for SO-8 devices
—
V
IORM
= 630V peak for DIP 300 mil devices
—
V
IORM
= 1414V peak for DIP 400 mil (widebody)
devices
Dual channel version available (253X/053X/0534)
—
Applications
High voltage insulation
Video signal isolation
Line receivers
Feedback element in switched mode power supplies
High speed logic ground isolation
—
TTL/TTL, TTL/CMOS, TTL/LSTTL
Replaces pulse transformers
Replaces slow phototransistor isolators
Analog signal ground isolation
It is advised that normal static precautions be
taken in handling and assembly of this
component to prevent damage and/or
degradation which may be induced by ESD.
CAUTION
Broadcom
-1-
6N135/6, HCNW135/6, HCPL-2502/0500/0501
Data Sheet
Ordering Information
6N135, 6N136, HCPL-2502, HCPL-0500, HCPL-0501 are UL Recognized with 3750 V
rms
for 1 minute per UL1577.
HCNW135 and HCNW136 are UL Recognized with 5000 V
rms
for 1 minute per UL1577. All these devices are approved under CSA
Component Acceptance Notice #5, File CA 88324.
Option
Part
Number
6N135
6N136
HCPL-2502
RoHS
Compliant
-000E
-300E
-500E
-020E
-320E
-520E
-060E
-360E
-560E
HCPL-0500
HCPL-0501
-000E
-500E
-060E
-560E
HCNW135
HCNW136
-000E
-300E
-500E
Non RoHS
Compliant
No option
#300
#500
#020
#320
#520
#060
#360
#560
No option
#500
#060
#560
No option
#300
#500
400 mil
Widebody
DIP-8
X
X
X
X
X
X
X
X
X
X
X
SO-8
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Package
Surface
Mount
Gull Wing
Tape and
Reel
UL 5000
V
rms
/
1 Minute
Rating
IEC/EN/DIN
EN
60747-5-5
Quantity
300mil DIP-8
X
X
X
X
X
X
X
X
X
X
X
50 per tube
50 per tube
1000 per reel
50 per tube
50 per tube
1000 per reel
50 per tube
50 per tube
1000 per reel
100 per tube
1500 per reel
100 per tube
1500 per reel
42 per tube
42 per tube
750 per reel
To order, choose a part number from the part number column and combine with the desired option from the option column to
form an order entry.
Example 1:
HCPL-2502-560E to order product of 300 mil DIP Gull Wing Surface Mount package in Tape and Reel packaging with
IEC/EN/DIN EN 60747-5-5 Safety Approval in RoHS compliant.
Example 2:
HCPL-2502 to order product of 300 mil DIP package in tube packaging and non RoHS compliant.
Option data sheets are available. Contact your Broadcom sales representative or authorized distributor for information.
NOTE
The notation ‘#XXX’ is used for existing products, while (new) products launched since 15th July 2001 and RoHS
compliant option will use ‘-XXXE‘.
Broadcom
-3-
6N135/6, HCNW135/6, HCPL-2502/0500/0501
Data Sheet
Package Outline Drawings
8-Pin DIP Package (6N135/6, HCPL-2502)
9.65 ± 0.25
(0.380 ± 0.010)
TYPE NUMBER
8
7
6
5
7.62 ± 0.25
(0.300 ± 0.010)
6.35 ± 0.25
(0.250 ± 0.010)
OPTION CODE*
DATE CODE
A XXXXZ
YYWW
EEE
1
1.19 (0.047) MAX.
2
3
RU
UL RECOGNITION
LOT ID
4
1.78 (0.070) MAX.
+ 0.076
- 0.051
+ 0.003)
5 TYP.
3.56 ± 0.13
(0.140 ± 0.005)
4.70 (0.185) MAX.
0.254
(0.010
- 0.002)
0.51 (0.020) MIN.
2.92 (0.115) MIN.
DIMENSIONS IN MILLIMETERS AND (INCHES).
*MARKING CODE LETTER FOR OPTION NUMBERS
"L" = OPTION 020
"V" = OPTION 060
OPTION NUMBERS 300 AND 500 NOT MARKED.
NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX.
1.080 ± 0.320
(0.043 ± 0.013)
0.65 (0.025) MAX.
2.54 ± 0.25
(0.100 ± 0.010)
Broadcom
-4-
6N135/6, HCNW135/6, HCPL-2502/0500/0501
Data Sheet
8-Pin DIP Package with Gull Wing Surface Mount Option 300 (6N135/6)
LAND PATTERN RECOMMENDATION
9.65 ± 0.25
(0.380 ± 0.010)
8
7
6
5
1.016 (0.040)
6.350 ± 0.25
(0.250 ± 0.010)
10.9 (0.430)
1
2
3
4
2.0 (0.080)
1.27 (0.050)
1.19
(0.047)
MAX.
1.780
(0.070)
MAX.
9.65 ± 0.25
(0.380 ± 0.010)
7.62 ± 0.25
(0.300 ± 0.010)
0.254
- 0.051
3.56 ± 0.13
(0.140 ± 0.005)
+ 0.076
(0.010
- 0.002)
+ 0.003)
1.080 ± 0.320
(0.043 ± 0.013)
2.54
(0.100)
BSC
DIMENSIONS IN MILLIMETERS (INCHES).
LEAD COPLANARITY = 0.10 mm (0.004 INCHES).
0.635 ± 0.130
(0.025 ± 0.005)
0.635 ± 0.25
(0.025 ± 0.010)
12 NOM.
NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX.
Broadcom
-5-
京公网安备 11010802033920号
EEWORLD
