256/128/128 Mb (16/8/8 M x 16-Bit) CMOS, 3.0 Volt-only
Simultaneous Read/Write, Page-Mode Flash Memory
Data Sheet
(Preliminary)
S29PL-N MirrorBit
™
Flash Family Cover Sheet
Notice to Readers:
This document states the current technical specifications regarding the Spansion
product(s) described herein. Each product described herein may be designated as Advance Information,
Preliminary, or Full Production. See
Notice On Data Sheet Designations
for definitions.
Publication Number
S29PL-N_00
Revision
A
Amendment
5
Issue Date
June 6, 2007
Data
Sheet
(Pre limin ar y)
Notice On Data Sheet Designations
Spansion Inc. issues data sheets with Advance Information or Preliminary designations to advise readers of
product information or intended specifications throughout the product life cycle, including development,
qualification, initial production, and full production. In all cases, however, readers are encouraged to verify
that they have the latest information before finalizing their design. The following descriptions of Spansion data
sheet designations are presented here to highlight their presence and definitions.
Advance Information
The Advance Information designation indicates that Spansion Inc. is developing one or more specific
products, but has not committed any design to production. Information presented in a document with this
designation is likely to change, and in some cases, development on the product may discontinue. Spansion
Inc. therefore places the following conditions upon Advance Information content:
“This document contains information on one or more products under development at Spansion Inc.
The information is intended to help you evaluate this product. Do not design in this product without
contacting the factory. Spansion Inc. reserves the right to change or discontinue work on this proposed
product without notice.”
Preliminary
The Preliminary designation indicates that the product development has progressed such that a commitment
to production has taken place. This designation covers several aspects of the product life cycle, including
product qualification, initial production, and the subsequent phases in the manufacturing process that occur
before full production is achieved. Changes to the technical specifications presented in a Preliminary
document should be expected while keeping these aspects of production under consideration. Spansion
places the following conditions upon Preliminary content:
“This document states the current technical specifications regarding the Spansion product(s)
described herein. The Preliminary status of this document indicates that product qualification has been
completed, and that initial production has begun. Due to the phases of the manufacturing process that
require maintaining efficiency and quality, this document may be revised by subsequent versions or
modifications due to changes in technical specifications.”
Combination
Some data sheets contain a combination of products with different designations (Advance Information,
Preliminary, or Full Production). This type of document distinguishes these products and their designations
wherever necessary, typically on the first page, the ordering information page, and pages with the DC
Characteristics table and the AC Erase and Program table (in the table notes). The disclaimer on the first
page refers the reader to the notice on this page.
Full Production (No Designation on Document)
When a product has been in production for a period of time such that no changes or only nominal changes
are expected, the Preliminary designation is removed from the data sheet. Nominal changes may include
those affecting the number of ordering part numbers available, such as the addition or deletion of a speed
option, temperature range, package type, or V
IO
range. Changes may also include those needed to clarify a
description or to correct a typographical error or incorrect specification. Spansion Inc. applies the following
conditions to documents in this category:
“This document states the current technical specifications regarding the Spansion product(s)
described herein. Spansion Inc. deems the products to have been in sufficient production volume such
that subsequent versions of this document are not expected to change. However, typographical or
specification corrections, or modifications to the valid combinations offered may occur.”
Questions regarding these document designations may be directed to your local sales office.
2
S29PL-N MirrorBit
™
Flash Family
S29PL-N_00_A5 June 6, 2007
S29PL-N MirrorBit
™
Flash Family
29PL256N, S29PL127N, S29PL129N,
256/128/128 Mb (16/8/8 M x 16-Bit) CMOS, 3.0 Volt-only
Simultaneous Read/Write, Page-Mode Flash Memory
Data Sheet
(Preliminary)
General Description
The Spansion Family Name is the latest generation 3.0-Volt page mode read family fabricated using the 110 nm Mirrorbit
TM
Flash process technology. These 8-word page-mode Flash devices are capable of performing simultaneous read and write
operations with zero latency on two separate banks. These devices offer fast page access times of 25 to 30 ns, with
corresponding random access times of 65 ns, 70 ns, and 80 ns respectively, allowing high speed microprocessors to operate
without wait states. The S29PL129N device offers the additional feature of dual chip enable inputs (CE1# and CE2#) that allow
each half of the memory space to be controlled separately.
Distinctive Characteristics
Architectural Advantages
32-Word Write Buffer
Dual Chip Enable Inputs (only for S29PL129N)
– Two CE# inputs control selection of each half of the memory space
Hardware Features
WP#/ACC (Write Protect/Acceleration) Input
– At V
IL
, hardware level protection for the first and last two 32 Kword
sectors.
– At V
IH
, allows the use of DYB/PPB sector protection
– At V
HH
, provides accelerated programming in a factory setting
Single Power Supply Operation
– Full Voltage range of 2.7 – 3.6 V read, erase, and program
operations for battery-powered applications
– Voltage range of 2.7 – 3.1 V valid for PL-N MCP products
Dual Boot and No Boot Options
Low V
CC
Write Inhibit
Simultaneous Read/Write Operation
– Data can be continuously read from one bank while executing
erase/program functions in another bank
– Zero latency switching from write to read operations
Security Features
Persistent Sector Protection
– A command sector protection method to lock combinations of
individual sectors to prevent program or erase operations within that
sector
– Sectors can be locked and unlocked in-system at V
CC
level
4-Bank Sector Architecture with Top and Bottom Boot Blocks
256-Word Secured Silicon Sector Region
– Up to 128 factory-locked words
– Up to 128 customer-lockable words
Password Sector Protection
– A sophisticated sector protection method locks combinations of
individual sectors to prevent program or erase operations within that
sector using a user defined 64-bit password
Manufactured on 0.11 µm Process Technology
Data Retention of 20 years Typical
Cycling Endurance of 100,000 Cycles per Sector Typical
Publication Number
S29PL-N_00
Revision
A
Amendment
5
Issue Date
June 6, 2007
This document states the current technical specifications regarding the Spansion product(s) described herein. The Preliminary status of this document indicates that product qual-
ification has been completed, and that initial production has begun. Due to the phases of the manufacturing process that require maintaining efficiency and quality, this document
may be revised by subsequent versions or modifications due to changes in technical specifications.
Data
Sheet
(Pre limin ar y)
Performance Characteristics
Read Access Times (@ 30 pF, Industrial Temp.)
Random Access Time, ns (t
ACC
)
Page Access Time, ns (t
PACC
)
Max CE# Access Time, ns (t
CE
)
Max OE# Access Time, ns (t
OE
)
65
25
65
25
70
30
70
30
Current Consumption (typical values)
8-Word Page Read
Simultaneous Read/Write
Program/Erase
Standby
6 mA
65 mA
25 mA
20 µA
Typical Program & Erase Times (typical values)
(See Note)
Typical Word
Typical Effective Word (32 words in buffer)
Accelerated Write Buffer Program
Typical Sector Erase Time (32-Kword Sector)
Typical Sector Erase Time (128-Kword Sector)
Note
Typical program and erase times assume the following conditions: 25°C, 3.0 V V
The main application scenarios of short-range wireless products come from the emerging Internet of Things. The application scenarios of the Internet of Things are diverse, and various short-range wire...
Thu Nov 11, 2021 16:40:49: Failed to set configuration with MCU name STM8S105C6: SWIM error [30004]: Comm timeoutThu Nov 11, 2021 16:41:11: Failed to write chunk with size 128 at address 0x8000: SWIM ...
[i=s]This post was last edited by qwqwqw2088 on 2020-2-20 11:47[/i]TI's, measurement range -55 ~ 130 ℃, wide voltage supply 2.4-5.5V, quiescent current less than 10uA, high precision, analog output.Th...
[Source: Changsha Evening News] According to @Phoenix Weekly, a nursing home in Chongqing recently welcomed its youngest resident - Mr. Gu, who is only 39 years old.
Living in a nursing home at the ag...
Recruiting 1-2 part-time MCU engineers, familiar with STM32 and RTOS preferred, preferably students of Dalian University of Technology, WeChat/Tel: 13478402712...
For hardware manufacturers with a huge user base, after-sales service is also an important source of profit. This is especially true for the relatively closed Apple. Previously, in an advance...[Details]
Recently, a technology patent applied for by Microsoft was exposed by the media. It describes a system that allows users to input text into computing devices using eye tracking software.
Mi...[Details]
Before conducting the simulation experiment, you must install the software, one is the MCU simulation software (ISIS 7 Professional) and the MCU programming software (Keil uVision4), one is for writi...[Details]
China Mobile announced in various public occasions in early July that it will build more than 50,000 5G base stations this year, realize 5G commercial services in more than 50 cities, and provide uni...[Details]
The OPPO K9s launch conference has officially been announced and will be held at 14:00 on October 20. It is said to be the launch conference with the most benefits in OPPO's history, a launch c...[Details]
Recently, Crystal Optech stated in an institutional survey that the company's current comprehensive capacity utilization rate is around 80%, and overall orders are already climbing rapidly. The comp...[Details]
Last night, Samsung's 5G mid-range phone Galaxy A51 5G was officially released, priced at 2,999 yuan. In terms of appearance, the Galaxy A51 5G uses a 6.5-inch FHD+ star-dot screen, the body size i...[Details]
TITLE "Key Stroke Wake Up" LIST P = 16C54 ;****************************************************** ; Program demonstrating key stroke wake up for ; the P IC 16CXX. Program has ...[Details]
Without going into the principle, let me show you the implementation process:
first step:
Configure kernel Makefile
make menuconfig
General setup ----
Configure standard kernel features ...[Details]
Independent key detection is very simple. It is to detect which i/o port of the microcontroller is at a low level and then determine which key is pressed. Of course, de-jittering is also required, th...[Details]
Gartner released its latest research on data and analytics (D&A) strategy and operations at the recent 2024 Greater China Executive Exchange Conference.
Gartner predicts that by 2026, more th...[Details]
Who invented the DC generator?
The DC generator was invented by American physicist Michael Faraday in 1831. Faraday discovered that when a conductor moves in a magnetic field, an electromotive...[Details]
Planning systems are becoming more and more complete, projects related to new power systems are coming one after another, and companies are integrating and innovating across industries, with power gri...[Details]
Wireless Connectivity
京公网安备 11010802033920号
EEWORLD
