ETHERNET-INTELLIGENT
OPERATOR INTERFACE
OP7200
eDISPLAY SERIES
The compact eDisplay is an intelligent operator interface ideal for data
acquisition and stand-alone systems such as factory floor controls
The OP7200 series of intelligent operator interfaces offers
rugged I/O and Ethernet connectivity, along with optional
A/D and touchscreen capabilities. The 10-Base-T Ethernet
facilitates remote diagnostics, control and communication,
including sending and receiving emails and alerts. Both
models come equipped with a ¼ VGA display with a 9-key
keypad and programmable on/off white LED backlight. The
OP7200 series also provides easy-to-use menu building
software and offer a programmable audible alarm for prompt
notification and keypad/display feedback.
Functionality of the OP7200 series can be expanded using the
optional RabbitNet™ expansion cards. RabbitNet expansion
cards can be tailored to a large variety of demanding
applications.
BENEFITS
– Rabbit® 2000 microprocessor at 22 MHz
– ¼ VGA display (320 x 240 pixels)
– 10Base-T Ethernet, RJ-45
– 256K Flash/128K SRAM
– 24-27 industrialized I/O and 4 CMOS-compatible
serial ports
– English and foreign language fonts
– Graphic and bitmap images
– Open source GUI libraries
APPLICATION EXAMPLE
Ethernet
HOME MANAGEMENT
SYSTEM
SOLAR HOT WATER SYSTEM
OP7200
Water
Pump
Radiant
Floor Heating
RS-232
Cold
Water
RELATED PRODUCTS
Solar Thermal
Panels
Valve
Manifold
Hot
Water
Temperature
Sensor
ConnectCore®
6 SBC
Rabbit® SBC
BL4S200
Series
Rabbit® SBC
BL2100
Series
Rabbit® SBC
BL4S100
Series
Dynamic C®
Hot Water Tank
Temperature Sensor
SPECIFICATIONS
FEATURE
OP7200
Rabbit® 2000 at 22 MHz
10/100-compatible with 10Base-T interface, RJ-45
256K
128K
Socketed 3V lithium coin type, 265 mA·h
| OP7210
MICROPROCESSOR
ETHERNET PORT
FLASH MEMORY
SRAM
BACKUP BATTERY
KEYPAD/DISPLAY
TOUCHSCREEN
LEDS
DIGITAL INPUTS
DIGITAL OUTPUTS
¼ VGA (320 × 240 pixels) with programmable white LED backlight, black on white display, transflective FSTN LCD,
6 o’clock viewing angle; 9-key keypad
4096 × 4096 resistive touchscreen
4: Power On, Microprocessor Error, Ethernet Link, Ethernet Activity
19: Protected to ±36 VDC
16: Protected to ±36 VDC
None
8: Individually configurable in software to sink up to 350 mA each, 36VDC max., or source up to 250 mA each, 40VDC max
8 single-ended or 4 differential, 200 kΩ input impedance,
1.5 ksamples/s sampling rate
Software-controlled ranges: 0–1V, 2V, 5V 10V,
20 VDC (11-bit single-ended, 12-bit differential)
Four 12-position screw-terminal headers, 0.1” pitch
ANALOG INPUTS
None
CONNECTORS
Three 12-position screw-terminal headers, 0.1” pitch
SERIAL PORTS
4 serial ports:
• 2 RS-232 or 1 RS-232 (with CTS/RTS)
• 1 RS-485 with onboard network termination and bias resistors or 1 RS-422 SPI master port
• One 5V CMOS-compatible programming port
Max. burst rate = CLK/32, Max. sustained rate = CLK/64
Yes
Five 8-bit timers (4 cascadable from the first), one 10-bit timer with 2 match registers
Yes
9–40 VDC or 22–26 VAC, 4W max.
Operating Range: -10° C to +65° C; Storage Range: -30° C to +80° C
20% to 70%, non-condensing
4.41” × 5.67” × 1.70” (112 mm × 144 mm × 43 mm)
SERIAL RATE
REAL-TIME CLOCK
TIMERS
WATCHDOG/SUPERVISOR
POWER
TEMPERATURE
HUMIDITY
UNIT SIZE
PART NUMBERS
20-101-0535
20-101-0536
DESCRIPTION
OP7200 With touchscreen
OP7210 Without touchscreen
DIGI SERVICE AND SUPPORT /
You can purchase with confidence knowing that Digi
is always available to serve you with expert technical support and our industry
leading warranty. For detailed information visit www.digi.com/support.
© 1996-2017 Digi International Inc. All rights reserved.
All trademarks are the property of their respective owners.
91001597
C2/717
DIGI INTERNATIONAL WORLDWIDE HQ
877-912-3444 / 952-912-3444 /
www.digi.com
DIGI INTERNATIONAL GERMANY
+49-89-540-428-0
DIGI INTERNATIONAL JAPAN
+81-3-5428-0261 / www.digi-intl.co.jp
DIGI INTERNATIONAL SINGAPORE
+65-6213-5380
DIGI INTERNATIONAL CHINA
+86-21-50492199 / www.digi.com.cn
Motor Drive Control（Motor Control）
京公网安备 11010802033920号
EEWORLD
