REVISION BK
DO NOT
SCALE FROM
THIS PRINT
CLM-1XX-XX-XX-D-XX
No OF POSITIONS / ROW
-02 THRU -50
LEAD STYLE SPEC
-02: SURFACE MOUNT
(USE C-117-01-X)
PLATING SPECIFICATION
-F: 3µ" FLASH SELECTIVE GOLD IN CONTACT
AREA MATTE TIN ON TAIL
(PRE-PLATED CONTACT)
-L: 10µ" LIGHT SELECTIVE GOLD IN CONTACT
AREA MATTE TIN ON TAIL
(PRE-PLATED CONTACT)
-G: 10µ" GOLD IN CONTACT AREA 3µ" ON TAIL
(POST-PLATED CONTACT)
-H: 30µ" HEAVY GOLD IN CONTACT AREA
3µ" ON TAIL
(POST-PLATED CONTACT)
-LM: 10µ" LIGHT SELECTIVE GOLD IN CONTACT
AREA MATTE TIN ON TAIL
(PRE-PLATED CONTACT)
-FM: 3µ" FLASH SELECTIVE GOLD IN CONTACT
AREA MATTE TIN ON TAIL
(PRE-PLATED CONTACT)
.1000 2.540
REF
C-117-01-X
OPTION
-P: PICK & PLACE PAD
(AVAILABLE ON POS 7 THRU 50 ONLY)
(SEE FIG 3, SHT 2)(USE LMP-04)
-TR: TAPE & REEL
-BE: BOTTOM ENTRY ONLY
(SEE FIG 2)(USE CLM-XX-DBE-XX)
-PA: PICK & PLACE PAD W/ ALIGNMENT PINS
(SEE FIG 4, SHT 2)
-A: ALIGNMENT PIN (USE CLM-XX-D-XX)
(AVAILABLE ON POS 3 THRU 50 ONLY)
(SEE FIG 5, SHT 2)
-K: POLYIMIDE FILM PAD
(POSITION 3 THRU 6 USE K-DOT-.098-.222-.005)
(SEE FIG 7, SHT 2)
(POSITION 7 THRU 50 USE K-DOT-.138-.250-.005)
(SEE FIG 6, SHT 2)
BODY SPEC
-D: DOUBLE ROW
(USE CLM-XX-D)
FIG 2
(SAME AS FIG 1 EXCEPT INSULATOR)
C
(No OF POS. X .03937[1.0000] + .0125[.318]) .008
(SEE NOTE 3 AND 7)
(SEE NOTE 8)
C
L
.0394 1.000
C-117-01-X
.0110 0.279 x .0050[.127] REF
No. OF POS x .03937[1.0000] - .03937[1.0000]
REF
2 MAX SWAY
(ANY DIRECTION)
"A"
C
.0885 2.248
(MEASURED AT BEND)
0°±3°
C
C
SEE NOTE 9
.0835 2.121 REF
FIG 1
"A"
.150±.010 3.81±0.250
(SEE NOTE 5)
SECTION "A"-"A"
SCALE 4 : 1
BURR SIDE (SEE NOTE 5)
NOTES:
1.
C
REPRESENTS CRITICAL DIMENSION.
2. MINIMUM PUSHOUT FORCE: .5 LB.
3. WILL LOSE A POSITION FOR EVERY CUT MADE ON
A SOCKET STRIP.
4. POSITIONS -05 THRU -50 ARE TO BE TUBED.
POSITIONS -03 AND -04 WITH -K OPTION ARE TO BE TUBED.
POSITIONS -02 THROUGH -04 WITH NO OPTIONS, -A, OR -BE
TO BE BULK PACKAGED IN A ASBBLTXXXX BAG AS STANDARD.
5. SHEAR TAILS TO DIMENSIONS SHOWN, .003 MAX SHEAR BURR.
6. PARTS TO BE SYMMETRICAL ABOUT C .
L
7. CUT FLASH TO BE .010 [.25] MAX WITH NO FLASH ALLOWED
IN HOLES OR EXTENDING BELOW LEADS.
8. ENDWALL AFTER CUTTING: .0155±.0025 [.398±.064]
9. COPLANARITY TO BE .0040 FOR POSITIONS 2-25
& .0060 FOR POSITIONS 26-50.
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS
*
PROPRIETARY NOTE
*
.XX: .01 [.3]
2
.XXX: .005 [.13]
.XXXX: .0020 [.051]
ANGLES
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
MATERIAL:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
BODY: LCP, UL 94 VO
COLOR: BLACK
TERMINAL:
PHOS BRONZE
F:\DWG\MISC\mktg\CLM-1XX-XX-XX-D-XX-MKT.SLDDRW
LOW PROFILE 1MM x 1MM DOUBLE ROW BODY
CLM-1XX-XX-XX-D-XX
08/10/94
SHEET
1
OF
2
BY:
G. PURVIS
REVISION BK
FIG 3
-P: PICK & PLACE PAD
AVAILABLE ON POSITIONS 7 THRU 50 ONLY
"N"
.225 5.72
REF
C
L
.0966 2.454
FIG 5
-A: MOLDED ALIGNMENT PIN
-PACKAGING
(SEE NOTE 4)
TABLE 2
(INCLUDES -D & -D-BE)
OPTION
-P, -A-P
TUBE
PT-CLX001-D
PT-1-24-01-50
PLUG
TP-33
TP-33
.020 0.51 REF
(No OF POS. -2) x .03937 [1.0000]
.020 0.52
.015 0.38 REF
.144 3.66
REF
LMP-04
FIG 6
-K: POLYAMIDE FILM PAD
AVAILABLE ON POSITIONS 7 THRU 50 ONLY
"R"
"S"
.019±.020 0.48±0.51
-NONE
-A, -A-K,
-K
NOTE: ALL -PA OPTION PARTS SHIP
IN EIA-960 TRAYS.
"Q"
NOTE: "N" = USED MEASURED DIMENSION (REF)
"Q" = {("N" - .225[5.72]) / 2} .020[.51]
FIG 4
-PA: PICK & PLACE PAD WITH ALIGNMENT PINS
.0935 2.375 REF
"M"
C
.1185 3.010
.0535 1.359
REF
.035 0.89
(TYP)
.138 3.50 REF
NOTE: "R" = USED MEASURED DIMENSION (REF)
"S" = {("R" - .138[3.50]) / 2} .020[.51]
PT-CLX001-D
"A"
C
L
"P"
FIG 7
-K: POLYAMIDE FILM PAD
AVAILABLE ON POSITIONS 3 THRU 6 ONLY
"R"
"S"
.001±.020 0.02±0.51
C
L
.325 8.26
REF
C
L
.275 6.99
PPP-39-X-X-XX
TABLE 1
"M"
USED MEASURED DIMENSION(REF)
TABLE 3
4-14
16-50
5-15
17-49
.098 2.50 REF
"P"
{("M" - "A") / 2} .010[.25]
.0935 2.375 REF
PT-1-24-01-50
POS / ROW
4-15
16-50
"A"
.140[3.58] REF
.280[7.11] REF
NOTE: "R" = USED MEASURED DIMENSION (REF)
"S" = {("R" - .098[2.49]) / 2} .020[.51]
*
PROPRIETARY NOTE
*
POSITIONS
EVEN
ODD
PAD
PPP-39-E-4-15
PPP-39-E-16-50
PPP-39-O-4-15
PPP-39-0-16-50
F:\DWG\MISC\mktg\CLM-1XX-XX-XX-D-XX-MKT.SLDDRW
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
DO NOT SCALE DRAWING
SHEET SCALE: 4:1
LOW PROFILE 1MM x 1MM DOUBLE ROW BODY
CLM-1XX-XX-XX-D-XX
08/10/94
SHEET
2
OF
2
BY:
G. PURVIS
Wireless Connectivity
京公网安备 11010802033920号
EEWORLD
