TC1303C-AO1EUN datasheet, PDF - EEWORLD Datasheet

Datasheet> All Categories > Power/power management> The power supply circuit> TC1303C-AO1EUN

TC1303C-AO1EUN: Description0.5 A SWITCHING REGULATOR, 2400 kHz SWITCHING FREQ-MAX, PDSO10; CategoryPower/power management The power supply circuit; File Size453KB，36 Pages; ManufacturerMicrochip; Websitehttps://www.microchip.com; Environmental Compliance

Download Datasheet Parametric View All

TC1303C-AO1EUN Overview

0.5 A SWITCHING REGULATOR, 2400 kHz SWITCHING FREQ-MAX, PDSO10

TC1303C-AO1EUN Parametric

Parameter Name	Attribute value
Is it lead-free?	Lead free
Is it Rohs certified?	conform to
Maker	Microchip
Parts packaging code	TSSOP
package instruction	PLASTIC, MO-187, MSOP-10
Contacts	10
Reach Compliance Code	compli
ECCN code	EAR99
Other features	AUTOMATIC PWM TO PFM MODE
Analog Integrated Circuits - Other Types	SWITCHING REGULATOR
control mode	CURRENT-MODE
Control Technology	PULSE WIDTH MODULATION
Maximum input voltage	5.5 V
Minimum input voltage	2.7 V
Nominal input voltage	3.6 V
JESD-30 code	S-PDSO-G10
JESD-609 code	e3
length	3 mm
Humidity sensitivity level	1
Number of functions	1
Number of terminals	10
Maximum operating temperature	85 °C
Minimum operating temperature	-40 °C
Maximum output current	0.5 A
Package body material	PLASTIC/EPOXY
encapsulated code	TSSOP
Package shape	SQUARE
Package form	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
Peak Reflow Temperature (Celsius)	260
Certification status	Not Qualified
Maximum seat height	1.1 mm
surface mount	YES
Switch configuration	BUCK
Maximum switching frequency	2400 kHz
Temperature level	INDUSTRIAL
Terminal surface	Matte Tin (Sn)
Terminal form	GULL WING
Terminal pitch	0.5 mm
Terminal location	DUAL
Maximum time at peak reflow temperature	40
width	3 mm

Preview

Download Datasheet

View All

TC1303A/TC1303B/

TC1303C/TC1304

500 mA Synchronous Buck Regulator,

+ 300 mA LDO with Power-Good Output

Features

• Dual-Output Regulator (500 mA Buck Regulator

and 300 mA Low-Dropout Regulator)

• Power-Good Output with 300 ms Delay

• Total Device Quiescent Current = 65 µA, Typ.

• Independent Shutdown for Buck and LDO

Outputs (TC1303)

• Both Outputs Internally Compensated

• Synchronous Buck Regulator:

- Over 90% Typical Efficiency

- 2.0 MHz Fixed-Frequency PWM

(Heavy Load)

- Low Output Noise

- Automatic PWM to PFM mode transition

- Adjustable (0.8V to 4.5V) and Standard

Fixed-Output Voltages (0.8V, 1.2V, 1.5V,

1.8V, 2.5V, 3.3V)

• Low-Dropout Regulator:

- Low-Dropout Voltage = 137 mV Typ. @

200 mA

- Standard Fixed-Output Voltages

(1.5V, 1.8V, 2.5V, 3.3V)

• Power-Good Function:

- Monitors Buck Output Function (TC1303A)

- Monitors LDO Output Function (TC1303B)

- Monitors Both Buck and LDO Output Func-

tions (TC1303C

and TC1304)

- 300 ms Delay Used for Processor Reset

• Sequenced Startup and Shutdown (TC1304)

• Small 10-pin 3X3 DFN or MSOP Package

Options

• Operating Junction Temperature Range:

- -40°C to +125°C

• Undervoltage Lockout (UVLO)

• Output Short Circuit Protection

• Overtemperature Protection

Description

The TC1303/TC1304 combines a 500 mA synchro-

nous buck regulator and 300 mA Low-Dropout Regula-

tor (LDO) with a power-good monitor to provide a highly

integrated solution for devices that require multiple

supply voltages. The unique combination of an

integrated buck switching regulator and low-dropout

linear regulator provides the lowest system cost for

dual-output voltage applications that require one lower

processor core voltage and one higher bias voltage.

The 500 mA synchronous buck regulator switches at a

fixed frequency of 2.0 MHz when the load is heavy,

providing a low noise, small-size solution. When the

load on the buck output is reduced to light levels, it

changes operation to a Pulse Frequency Modulation

(PFM) mode to minimize quiescent current draw from

the battery. No intervention is necessary for smooth

transition from one mode to another.

The LDO provides a 300 mA auxiliary output that

requires a single 1 µF ceramic output capacitor,

minimizing board area and cost. The typical dropout

voltage for the LDO output is 137 mV for a 200 mA

load.

For the TC1303/TC1304, the power-good output is

based on the regulation of the buck regulator output, the

LDO output or the combination of both. The TC1304

features start-up and shutdown output sequencing.

The TC1303/TC1304 is available in either the 10-pin

DFN or MSOP package.

Additional protection features include: UVLO,

overtemperature and overcurrent protection on both

outputs.

For a complete listing of TC1303/TC1304 standard

parts, consult your Microchip representative.

Applications

•

Cellular Phones

Portable Computers

USB-Powered Devices

Handheld Medical Instruments

Organizers and PDAs

2005 Microchip Technology Inc.

DS21949B-page 1

Recommended Resources

Field effect tube time relay circuit three

Switching circuit TDA4919 and its application circuit

CB3463 combined semi-automatic turret lathe electrical schematic circuit 04

Fax machine protector circuit diagram

Fish tank thermostat circuit

555 simple water level monitoring circuit

[RTT & Renesas high performance CPK-RA6M4] 6. Software simulation I2C driver PCF8574 evaluation: 1. Hardware 1. PCF8574 Description I have a pcf8574 IO expansion board, which was originally used to drive 1602. Unfortunately, I found that 1602 was broken and could not light up. So I could only use...; kit7828 Renesas Electronics MCUs

LPC1768 information release: This content is originally created by EEWORLD forum user cxmdz . If you want to reprint or use it for commercial purposes, you must obtain the author's consent and indicate the source...; cxmdz NXP MCU

Design of high-speed communication system between FPGA and DSP based on SRIO: Abstract: Modern signal processing systems usually require high-speed data communication between different processors. The SRIO protocol is widely used due to its high efficiency and low latency. This...; 灞波儿奔 DSP and ARM Processors

Filter capacitor value after bridge rectification: Dear teachers, how do you choose the filter capacitor for the bridge rectifier circuit? When calculating the filter capacitor after bridge rectification, it is often necessary to first set a time cons...; Aguilera Power technology

Please look at this circuit, why is the output signal like this, the DC operating point is fine: This kind of signal appears during simulation, like oscillation. The actual circuit built also has this problem. It looks like the noise is very loud, and I can't find the reason. This kind of signal ...; 埋土书生 Analog electronics

Embedded System Basics: What is a Microcontroller MCU?: When developing an embedded system, one of the options is to base the computing hardware on a microcontroller rather than a microprocessor MPU. Both approaches have their appeal, but generally they wi...; 朗锐智科 Talking

Shortcut: S0 S1 S2 S3 S4 S5 S6 S7 S8 S9 SA SB SC SD SE SF SG SH SI SJ SK SL SM SN SO SP SQ SR SS ST SU SV SW SX SY SZ T0 T1 T2 T3 T4 T5 T6 T7 T8 T9 TA TB TC TD TE TF TG TH TI TJ TK TL TM TN TO TP TQ TR TS TT TU TV TW TX TY TZ U0 U1 U2 U3 U4 U6 U7 U8 UA UB UC UD UE UF UG UH UI UJ UK UL UM UN UP UQ UR US UT UU UV UW UX UZ V0 V1 V2 V3 V4 V5 V6 V7 V8 V9 VA VB VC VD VE VF VG VH VI VJ VK VL VM VN VO VP VQ VR VS VT VU VV VW VX VY VZ W0 W1 W2 W3 W4 W5 W6 W7 W8 W9 WA WB WC WD WE WF WG WH WI WJ WK WL WM WN WO WP WR WS WT WU WV WW WY X0 X1 X2 X3 X4 X5 X7 X8 X9 XA XB XC XD XE XF XG XH XK XL XM XN XO XP XQ XR XS XT XU XV XW XX XY XZ Y0 Y1 Y2 Y4 Y5 Y6 Y9 YA YB YC YD YE YF YG YH YK YL YM YN YP YQ YR YS YT YX Z0 Z1 Z2 Z3 Z4 Z5 Z6 Z8 ZA ZB ZC ZD ZE ZF ZG ZH ZJ ZL ZM ZN ZP ZR ZS ZT ZU ZV ZW ZX ZY

Popular Components