To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at
www.onsemi.com.
Please
email any questions regarding the system integration to
Fairchild_questions@onsemi.com.
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
KA78LXXA / KA78L05AA — 3-Terminal 0.1 A Positive Voltage Regulator
July 2015
KA78LXXA / KA78L05AA
3-Terminal 0.1 A Positive Voltage Regulator
Features
• Maximum Output Current of 100 mA
• Output Voltage of 5 V, 6 V, 8 V, 9 V, 10 V, 12 V,
15 V and 18 V
• Thermal Overload Protection
• Short-Circuit Current Limiting
• Output Voltage Offered in ± 5% Tolerance
Description
The KA78LXXA / KA78L05AA series of fixed-voltage,
monolithic, integrated circuit, voltage regulators are suit-
able for applications that require supply current up to 100
mA.
TO-92
SOT-89
GND
1 2
3
123
1. Output 2. GND 3. Input
8-SOIC
8
1
1. Output 2. GND 3. GND 4. NC
5. NC 6. GND 7. GND 8. Input
Ordering Information
Product Number
KA78L05AZTA
KA78L05AZBU
KA78L06AZTA
KA78L08AZTA
KA78L09AZTA
KA78L10AZTA
KA78L12AZTA
KA78L15AZTA
KA78L18AZTA
KA78L05AMTF
KA78L08AMTF
KA78L12AMTF
KA78L05ADTF
KA78L05AAZTA
8-SOIC
TO-92
SOT-89
TO-92
Package
Packing Method Output Voltage Tolerance Operating Temperature
[i=s] This post was last edited by bqgup on 2019-4-26 19:51 [/i] [postbg]3.jpg[/postbg][font=黑体][size=5]Digital tube clock written in Verilog HDL language[/size][/font][font=黑体][size=5] [/size][/font]...
We purchased several M430F5438A development boards and hope to develop FFT. However, when using the MSP-EXP430F5438 _User_Expertience (slac2271) provided by TI, the link error is as follows:
“
Linking...
Imagine being able to change your project MCU card according to your needs, almost like upgrading your computerhttps://www.hackster.io/MakerIoT2020/interchangeable-esp12-e-card-074268...
Why can't the internal resistance of a diode be ignored when the current is large? According to 1/rbe being approximately equal to Id/Ut, shouldn't the internal resistance be smaller when the current ...
I was browsing forums and news these days, and suddenly saw a new term - Wi-Fi 7
....Um....
No, wasn’t Wi-Fi 6 being promoted before? What the hell, I haven’t even used a Wi-Fi 6 router and I’m planni...
1 Overview
PHILIPS 51LPC series microcontrollers currently include seven models, P87LPC760/1/2/4/7/8/9. 51LPC provides high-speed and low-speed crystal oscillator and RC oscillator modes, whic...[Details]
Why does BlueRun Ventures firmly believe that
China’s robotics industry has entered its golden age?
As an institution focusing on early-stage technology investme...[Details]
With the continuous expansion of the business scale of Zhuhai Guanyu Battery Co., Ltd. (hereinafter referred to as the "Company") and the growing market demand, in order to better seize the market ...[Details]
For differential pressure level gauges , contact resistance is a point that we need to pay special attention to. At the instrument maintenance site, we often encounter instrument failures caused by co...[Details]
The ringing ASIC requires a DC voltage with a certain polarity to work properly, and the ringing voltage is a 25Hz AC voltage. Therefore, the AC must be converted into DC first to supply the oscill...[Details]
1 Introduction
In the field of industrial control and industrial production, the role of sensors in monitoring industrial control and production environment is self-evident. Most traditional sens...[Details]
introduction With the development of power electronics technology, nonlinear loads such as rectifiers and switching power supplies in the power grid are increasing. These power-consuming devices w...[Details]
Thermocouples have a wide range of applications due to their low price, high measurement accuracy, wide operating temperature range, simple structure, and ease of use. ITS-90 lists the following 8 ...[Details]
1. Current status of security integrated software development
With the continuous development of security technology, business integration, and the development of data mining and analysis tec...[Details]
Survival in the industrial market is becoming increasingly difficult with low-cost competition and a growing demand for differentiated products. At the same time, safety standards have not become m...[Details]
On December 12, 2019, Chen Feng, deputy director of the Blockchain and Application Joint Laboratory of the Institute of Software of the Chinese Academy of Sciences, revealed at the Blockchain and D...[Details]
The address space of the external RAM of the CS-51 microcontroller is 64K, and the address bus is 16 bits. The following four instructions can be executed to access the external RAM: MOVX A,@DPTR MOV...[Details]
According to foreign media reports, in order to speed up the pace of forming the "Chip Quad Alliance", the United States previously unilaterally set August 31 as the deadline, requiring South Korea t...[Details]
1. Change the coordinates displayed on the interface
When playing a video, the video starts playing from the coordinate (0,0). To change the coordinate, follow the steps below:
By che...[Details]