This product has been retired and is not recommended for designs. For new and current designs, S29JL032H (for TSOP packages) and S29PL032J (for FBGA packages) supersede
AM29DL32xG as the factory-recommended migration path. Please refer to each respective datasheets for specifications and ordering information. Availability of this document is retained
for reference and historical purposes only.”
DISTINCTIVE CHARACTERISTICS
ARCHITECTURAL ADVANTAGES
■
Simultaneous Read/Write operations
— Data can be continuously read from one bank while
executing erase/program functions in other bank
— Zero latency between read and write operations
■
Multiple bank architectures
— Three devices available with different bank sizes (refer
to Table 3)
■
256-byte Secured Silicon Sector
—
Factory locked and identifiable:
16 bytes available for
secure, random factory Electronic Serial Number;
verifiable as factory locked through autoselect
function. ExpressFlash option allows entire sector to
be available for factory-secured data
—
Customer lockable:
One time programmable. Once
locked, data cannot be changed.
■
Zero Power Operation
— Sophisticated power management circuits reduce
power consumed during inactive periods to nearly
zero
■
Package options
— 63-ball FBGA
— 48-ball FBGA
— 48-pin TSOP
— 64-ball Fortified BGA
■
Top or bottom boot block
■
Manufactured on 0.17 µm process technology
■
Compatible with JEDEC standards
— Pinout and software compatible with
single-power-supply flash standard
PERFORMANCE CHARACTERISTICS
■
High performance
— Access time as fast 70 ns
— Program time: 4 µs/word typical utilizing Accelerate
function
■
Ultra low power consumption (typical values)
— 2 mA active read current at 1 MHz
— 10 mA active read current at 5 MHz
— 200 nA in standby or automatic sleep mode
■
Minimum 1 million erase cycles guaranteed per
sector
■
20 year data retention at 125°C
— Reliable operation for the life of the system
SOFTWARE FEATURES
■
Data Management Software (DMS)
— AMD-supplied software manages data programming,
enabling EEPROM emulation
— Eases historical sector erase flash limitations
■
Supports Common Flash Memory Interface (CFI)
■
Erase Suspend/Erase Resume
— Suspends erase operations to allow programming in
same bank
■
Data# Polling and Toggle Bits
— Provides a software method of detecting the status of
program or erase cycles
■
Unlock Bypass Program command
— Reduces overall programming time when issuing
multiple program command sequences
HARDWARE FEATURES
■
Any combination of sectors can be erased
■
Ready/Busy# output (RY/BY#)
— Hardware method for detecting program or erase
cycle completion
■
Hardware reset pin (RESET#)
— Hardware method of resetting the internal state
machine to the read mode
■
WP#/ACC input pin
— Write protect (WP#) function allows protection of two
outermost boot sectors, regardless of sector protect
status
— Acceleration (ACC) function accelerates program
timing
■
Sector protection
— Hardware method of locking a sector, either
in-system or using programming equipment, to
prevent any program or erase operation within that
sector
— Temporary Sector Unprotect allows changing data in
protected sectors in-system
Publication#
25686
Rev:
B
Amendment:
10
Issue Date:
December 4, 2006
D A T A
S H E E T
GENERAL DESCRIPTION
The Am29DL32xG family consists of 32 megabit, 3.0
volt-only flash memor y devices, organized as
2,097,152 words of 16 bits each or 4,194,304 bytes of
8 bits each. Word mode data appears on DQ15–DQ0;
byte mode data appears on DQ7–DQ0. The device is
designed to be programmed in-system with the stan-
dard 3.0 volt V
CC
supply, and can also be programmed
in standard EPROM programmers.
The devices are available with an access time of 70,
90, or 120 ns. The devices are offered in 48-pin TSOP,
48-ball or 63-ball FBGA, and 64-ball Fortified BGA
packages. Standard control pins—chip enable (CE#),
write enable (WE#), and output enable (OE#)—control
normal read and write operations, and avoid bus con-
tention issues.
The devices requires only a
single 3.0 volt power
supply
for both read and write functions. Internally
generated and regulated voltages are provided for the
program and erase operations.
(programmed through AMD’s ExpressFlash service),
or both.
DMS (Data Management Software)
allows systems
to easily take advantage of the advanced architecture
of the simultaneous read/write product line by allowing
removal of EEPROM devices. DMS will also allow the
system software to be simplified, as it will perform all
functions necessary to modify data in file structures,
as opposed to single-byte modifications. To write or
update a particular piece of data (a phone number or
configuration data, for example), the user only needs
to state which piece of data is to be updated, and
where the updated data is located in the system. This
i s a n a d va n t a g e c o m p a r e d t o s y s t e m s w h e r e
user-written software must keep track of the old data
location, status, logical to physical translation of the
data onto the Flash memory device (or memory de-
vices), and more. Using DMS, user-written software
does not need to interface with the Flash memory di-
rectly. Instead, the user's software accesses the Flash
memory by calling one of only six functions. AMD pro-
vides this software to simplify system design and soft-
ware integration efforts.
The device offers complete compatibility with the
JEDEC single-power-supply Flash command set
standard.
Commands are written to the command
register using standard microprocessor write timings.
Reading data out of the device is similar to reading
from other Flash or EPROM devices.
The host system can detect whether a program or
erase operation is complete by using the device
sta-
tus bits:
RY/BY# pin, DQ7 (Data# Polling) and
DQ6/DQ2 (toggle bits). After a program or erase cycle
has been completed, the device automatically returns
to the read mode.
The
sector erase architecture
allows memory sec-
tors to be erased and reprogrammed without affecting
the data contents of other sectors. The device is fully
erased when shipped from the factory.
Hardware data protection
measures include a low
V
CC
detector that automatically inhibits write opera-
tions during power transitions. The
hardware sector
protection
feature disables both program and erase
operations in any combination of the sectors of mem-
ory. This can be achieved in-system or via program-
ming equipment.
The device offers two power-saving features. When
addresses have been stable for a specified amount of
time, the device enters the
automatic sleep mode.
The system can also place the device into the
standby mode.
Power consumption is greatly re-
duced in both modes.
Simultaneous Read/Write Operations with
Zero Latency
The Simultaneous Read/Write architecture provides
simultaneous operation
by dividing the memory
space into two banks. The device can improve overall
system performance by allowing a host system to pro-
gram or erase in one bank, then immediately and si-
multaneously read from the other bank, with zero
latency. This releases the system from waiting for the
completion of program or erase operations.
The Am29DL32xG device family uses multiple bank
architectures to provide flexibility for different applica-
tions. Three devices are available with the following
bank sizes:
Device
DL322
DL323
DL324
Bank 1
4
8
16
Bank 2
28
24
16
Am29DL32xG Features
The
Secured Silicon Sector
is an extra sector capable
of being permanently locked by AMD or customers.
The
Secured Silicon Indicator Bit
(DQ7) is perma-
nently set to a 1 if the part is
factory locked,
and set
to a 0 if
customer lockable.
This way, customer lock-
able parts can never be used to replace a factory
locked part.
Current version of device has 256
bytes, which differs from previous versions of this
device.
Factory locked parts provide several options. The Se-
cured Silicon Sector may store a secure, random 16
byte ESN (Electronic Serial Number), customer code
I used the howland constant current source circuit to make a 10ua current source. The supply voltage is 5V. I want to use 10ua current to drive 8 sensors. The internal resistance of each sensor is 20K...
[i=s]This post was last edited by chenzhufly on 2021-1-23 18:37[/i]2020 is an extraordinary year after all, and it will go down in history. The most touching sentence is: It's great to be alive! Enter...
2018 is almost over. I thought I would be able to relax at the end of the year, but the closer it gets to the end of the year, the more I feel like a spinning top. The projects I have on hand are gett...
The Internet of Vehicles is a technological miracle in today's automotive industry. It realizes all-round network connection within the car, between cars, between cars and roads, between cars and peop...
Although there have been some noises in terminal demand recently, the consensus in the industry is that wafer manufacturing capacity will be in short supply next year. As new capacity is gradually op...[Details]
We have disassembled the vivo X50 Pro. Next, we will analyze what is special about this phone from the perspective of components. vivo X50 Pro configuration at a glance: SoC: Qualcomm Snapdragon 76...[Details]
The portable thermometer uses the 16-bit ultra-low power microcontroller MSP430F435 and the thermal resistance sensor Platinum 1000 to realize the signal processing and acquisition of temperature. One...[Details]
In the previous section, we talked about counting on the CAP pin. In this section, we use the capture function to measure the frequency on the CAP pin. The principle is to obtain the time interval be...[Details]
The conflict between the EU and Apple has been going on for a long time, with the two sides battling over issues such as charging interfaces and app store commissions. But the arm couldn't twist the ...[Details]
On June 15, a configuration diagram of what is suspected to be the super-large cup Xiaomi 10 Pro+ was exposed on Weibo. As shown in the picture, the phone uses a 120Hz display, is equipped ...[Details]
Samsung Electronics Co., Ltd. recently announced a series of cutting-edge automotive memory solutions designed for the next generation of autonomous electric vehicles. The new products include 256 GB...[Details]
The National Development and Reform Commission, the National Energy Administration and other four departments recently jointly issued the "Implementation Plan for 5G Applications in the Energy Sect...[Details]
In the past, LED manufacturers have developed large-size LED chips to achieve their desired goals in order to maximize the white light LED beam. However, in reality, when the applied power of whit...[Details]
At present, the instruments for measuring distortion can be roughly divided into two categories according to the measurement principle: fundamental wave elimination method and spectrum analysis ...[Details]
1 Wireless digital transmission circuit
The wireless digital transmission circuit uses the wireless transmission chip TRF4900. TRF4900 is a monolithic, low-cost, fully functional multi-cha...[Details]
1. After the completion of the project, it must be operated continuously for at least one month to assess the stability of the system and whether the various performance indicators can fully meet the ...[Details]
Feisi electronic load is used for testing fast chargers: just press a button and the load will automatically start testing, trigger the output state change of the fast charger, coordinate with the ...[Details]
Up to now, more than 180 models have been tested based on the CC-1000T intelligent cockpit evaluation system of Cheyun Research, of which more than 79% have the ability to upgrade via OTA, and more...[Details]
Power technology
京公网安备 11010802033920号
EEWORLD
