OCL: Open Circuit Inductance test parameters: 100 kHz, 0.1 Vrms, 0.0 Adc.
(2)
Irms: DC current for an approximate
∆T
of 40 °C without core loss. Derating is
necessary for AC currents. PCB layout, trace thickness and width, air-flow, and
proximity of other heat generating components will affect the temperature rise. It
is recommended that the temperature of the part not exceed
+105
°C under
worst case operating conditions verified in the end application.
(3)
Isat Amperes peak for approximately 20% rolloff (@+20 °C)
(4)
Isat Amperes peak for approximately 30% rolloff (@+20 °C)
(5)
K-factor: Used to determine B p-p for core loss (see graph).
B p-p = K*L*∆I, B p-p: (Gauss), K: (K factor from table), L: (Inductance in uH),
∆(Peak
to peak ripple current in Amps).
Dimensions (mm)
TOP VIEW
FRONT VIEW
B
OTTOM VIEW
9.0
max
HCPT1309-xxx
wwllyy R
13.2 sq
MAX
2
3.5 +/- 0.5
1
"A " MAX
"B" +/- 1.0
"C" typ
SCHEMATIC
Dimension Table
Part No
HCPT1309-R20
HCPT1309-R47
HCPT1309-1R0
HCPT1309-1R5
HCPT1309-2R2
HCPT1309-3R3
RECOMMENDED PCB PAD LAYOUT
"D"
2.13
2.13
1.6
1.40
1.40
1.40
"B" +/- 1.0
ØD
"A "
14.0
14.0
13.7
13.5
13.5
13.5
"B"
12.2
12.2
12.0
11.8
11.8
11.8
"C"
1.63
1.63
1.29
1.15
1.15
1.15
1
Do not route traces or vias underneath the inductor
2
www.eaton.com/electronics
HCPT1309
High current power inductors
Technical Data
4138
Effective
July
2017
Core loss vs. Bp-p
160.00
140.00
120.00
200kHz
300kHz
400kHz
500kHz
600kHz
700kHz
800kH
900kHz
1.0MHz
Core Loss (mW)
100.00
80.00
60.00
40.00
20.00
0.00
250
500
750
1000
1250
1500
1750
2000
2250
2500
2750
B p-p (Gauss)
Inductance characteristics
OCL vs Isat
100
90
80
70
OCL (%)
60
50
40
30
20
10
0
0
20
40
60
80
% of Isat
100
120
140
160
www.eaton.com/electronics
3
Technical Data
4138
Effective
July
2017
HCPT1309
High current power inductors
Wave solder profile- Through-hole components
Reflow soldering not recommended
Life Support Policy: Eaton does not authorize the use of any of its products for use in life support devices or systems without the express written
approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly
used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user.
Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Eaton also
reserves the right to change or update, without notice, any technical information contained in this bulletin.
[i=s]This post was last edited by mameng on 2022-1-22 20:45[/i]1. The GD32L233C-START example program uses SysTick delay:Modify the main function:while(1) {gpio_bit_set(GPIOA, GPIO_PIN_7);gpio_bit_set...
【Chuanglong TL570x-EVM】Evaluation 0 3 -Evaluation Board Test Manual
1. Evaluation Test Manual2. Personal test content
Due to hardware resource limitations, the external module functions involved in th...
[i=s]This post was last edited by jj1989 on 2018-12-8 17:08[/i] [size=4][md]## Preface The previous article introduced some preparations needed to get started with nRF52840. By studying the official S...
I applied for the review of the Yatli Super Value M4 Core AT32F421 and it was successful,so I will carry out the review according to the review plan I applied for before . First, unboxing
The packagin...
[i=s]This post was last edited by wangerxian on 2022-10-23 19:32[/i]Smart desktop interactive robotAuthor: wangerxian1. Introduction
This design is a smart desktop interactive robot, which is an intel...
This article and design code were written by FPGA enthusiast Xiao Meige. Without the author's permission, this article is only allowed to be copied and reproduced on online forums, and the original au...
IDC released its latest quarterly mobile phone tracking report, which showed that the total shipments of the global smartphone market in Q2 were approximately 276.5 million units, a year-on-year decl...[Details]
From September 3 to 5, 2021, the 17th China Automotive Industry Development (TEDA) International Forum (hereinafter referred to as TEDA Automotive Forum) was held in Tianjin Binhai New Area, jointly ...[Details]
Recently, the New York Times quoted anonymous sources as saying that the US government is planning to issue special licenses to some US companies to allow them to sell some products to Chinese compan...[Details]
LED patch curing can be applied to the PCB using a syringe glue method, a needle transfer method or a template printing method.
针头转移法的使用不到全部应用的10%,它是使用针头排列阵浸在胶的託盘裡。然后悬掛的胶滴作为一个整体转移到板上。这些系统要求一种较...[Details]
Countries are actively promoting the implementation of energy conservation and emission reduction projects, especially China's LED street lights are valued by LED street light manufacturers due to ...[Details]
High-speed, low-latency connectivity solutions for distributed heterogeneous computing systems are essential to enabling next-generation autonomous driving applications. Microchip Technology Inc. (Na...[Details]
US technology companies have rejected calls from the Trump administration to stop sourcing products from certain Chinese companies because they are concerned that such a policy could violate competit...[Details]
1 Introduction
The integration of power supply is the development direction of power supply products. In the application of switching power supply, PWM control circuit is the core of power sup...[Details]
The electro-biochemical principle of blood glucose measurement is that when a certain voltage is applied to the blood after the enzyme reaction, the current generated will increase as the blood glu...[Details]
LED lighting will replace mainstream incandescent lighting and other lighting technologies and occupy a dominant position in the market. However, the transition from old technology to new technolog...[Details]
Jiwei.com reported on January 21 that yesterday, Chnbrand, an authoritative brand rating agency, released the 2021 (7th) China Customer Recommendation Index (C-NPS®) brand rankings. Let’s take a look...[Details]
System functions Use AVR external interrupt INT1 to detect key presses and use LED to make simple indications! hardware design AVR main control circuit schematic diagram LED control circui...[Details]
The battle over the perception route of autonomous driving technology has always been the focus of industry attention. Although Tesla's pure vision solution is leading the industry, the multi-senso...[Details]
The voltmeter is connected in parallel in the circuit under test to measure the voltage value of the circuit under test. According to the nature of the voltage measured, it is divided into DC voltmet...[Details]
On October 22, the largest energy storage power station in Shizhu County, Chongqing, the Shizhu County 110 kV Jinzhang Shared Energy Storage Power Station (Phase I), was officially put into operation ...[Details]