NOIP1SN1300A,
NOIP1SN0500A,
NOIP1SN0300A
PYTHON 0.3/0.5/1.3 Megapixel
Global Shutter CMOS
Image Sensors
Features
www.onsemi.com
SVGA: 800 x 600 Active Pixels, 1/3.6” Optical Format
VGA: 640 x 480 Active Pixels, 1/4” Optical Format
•
4.8
mm
x 4.8
mm
Low Noise Global Shutter Pixels with
In-pixel CDS
•
Monochrome (SN) or Color (SE)
•
Zero ROT Mode Enabling Faster Frame Rate
•
Frame Rate at Full Resolution (LVDS)
♦
210/175 frames per second @ SXGA (Zero ROT/Normal ROT)
♦
560/420 frames per second @ SVGA (Zero ROT/Normal ROT)
♦
860/620 frames per second @ VGA (Zero ROT/Normal ROT)
•
43 Frames per Second (fps) at Full Resolution (CMOS)
•
On-chip 10-bit Analog-to-Digital Converter (ADC)
•
8-bit or 10-bit Output Mode
•
Four Low Voltage Differential Signaling (LVDS) High Speed
Figure 1. PYTHON 1300 Photograph
Serial Outputs or Parallel CMOS Output
•
Random Programmable Region of Interest (ROI) Readout
•
Pipelined and Triggered Global Shutter, Rolling Shutter
•
On-chip Fixed Pattern Noise (FPN) Correction
The sensor has on-chip programmable gain amplifiers and
•
Serial Peripheral Interface (SPI)
10-bit A/D converters. The integration time and gain
•
Automatic Exposure Control (AEC)
parameters can be reconfigured without any visible image
•
Phase Locked Loop (PLL)
artifact. Optionally the on-chip automatic exposure control
•
High Dynamic Range (HDR)
loop (AEC) controls these parameters dynamically. The
•
Dual Power Supply (3.3 V and 1.8 V)
image’s black level is either calibrated automatically or can
be adjusted by adding a user programmable offset.
•
−40°C
to +85°C Operational Temperature Range
A high level of programmability using a four wire serial
•
48-pin LCC and Bare Die
peripheral interface enables the user to read out specific
•
590 mW Power Dissipation (LVDS)
regions of interest. Up to 8 regions can be programmed,
•
375 mW Power Dissipation (CMOS)
achieving even higher frame rates.
•
These Devices are Pb−Free and are RoHS Compliant
The image data interface of the P1-SN/SE part consists of
Applications
four LVDS lanes, facilitating frame rates up to 210 frames
•
Machine Vision
per second in Zero ROT mode. Each channel runs at
720 Mbps. A separate synchronization channel containing
•
Motion Monitoring
payload information is provided to facilitate the image
•
Security
reconstruction at the receiving end. The P2-SN/SE part
•
Barcode Scanning (2D)
provides a parallel CMOS output interface at reduced frame
Description
rate.
The Python’s high sensitivity 4.8
mm
x 4.8
mm
pixels
The PYTHON low resolution family is packaged in a
support low noise “pipelined” and “triggered” global shutter
48-pin LCC package and is available in a monochrome and
readout modes. In global shutter mode, the sensor supports
color version. For NIR variants, please contact your local
correlated double sampling (CDS) readout, reducing noise
distributor or email us at
imagesensors@onsemi.com.
and increasing dynamic range.
©
Semiconductor Components Industries, LLC, 2014
•
SXGA: 1280 x 1024 Active Pixels, 1/2” Optical Format
October, 2014
−
Rev. P2
1
Publication Order Number:
PB_NOIP1SN1300A/D
NOIP1SN1300A, NOIP1SN0500A, NOIP1SN0300A
SPECIFICATIONS
Key Specifications
Table 1. GENERAL SPECIFICATIONS
Parameter
Pixel type
Shutter type
Frame rate
Zero ROT/Normal
ROT mode
Specification
In−pixel CDS. Global shutter pixel
architecture
Pipelined and triggered global shutter
P1−SN/SE:
210/175 fps @ SXGA
560/420 fps @ SVGA
860/620 fps @ VGA
P2−SN/SE: 43 fps
P1−SN/SE:
72 MHz when PLL is used,
360 MHz (10−bit) / 288 MHz (8−bit)
when PLL is not used
P2−SN/SE: 72 MHz
8 Randomly programmable windows.
Normal, sub−sampled and binned
readout modes
10−bit, 8−bit (Note 1)
P1−SN/SE: 4/2/1 data + sync + clock
P2−SN/SE: 10−bit parallel output,
frame_valid, line_valid, clock
P1−SN/SE:
4 x 720 Mbps (10−bit) /
4 x 576 Mbps (8−bit)
P2−SN/SE: 72 MHz
P1−SN/SE: 590 mW, 10−bit mode
P2−SN/SE: 375 mW
48−pin LCC
Table 2. ELECTRO−OPTICAL SPECIFICATIONS
Parameter
Active pixels
Specification
SXGA: 1280 (H) x 1024 (V)
SVGA: 800 (H) x 600 (V)
VGA: 640 (H) x 480 (V)
4.8
mm
x 4.8
mm
0.096 LSB10/e
−
140
mV/e
−
< 9e
−
(Normal ROT, 1x gain)
< 7e
−
(Normal ROT, 2x gain)
7.7 V/lux.s
<1/8000
10000 e
−
56%
< 0.5 LSB10
< 10 LSB10
68% @ 535 nm
−
X−dir & Y−dir
120 LSB10/s, 1200 e
−
/s
5 e
−
/s, 0.5 LSB10/s
> 60 dB in global shutter mode
40 dB
Pixel size
Conversion gain
Dark temporal noise
Responsivity at 550 nm
Parasitic Light
Sensitivity (PLS)
Full Well Charge
Quantum Efficiency at
550 nm
Pixel FPN
PRNU
MTF
PSNL at 20°C
Dark signal at 20°C
Dynamic Range
Signal to Noise Ratio
(SNR max)
Master clock
Windowing
ADC resolution
LVDS outputs
CMOS outputs
Data rate
Power dissipation
Package type
1. The ADC is 11−bit, down−scaled to 10−bit. The PYTHON uses
a larger word−length internally to provide 10−bit on the output.
To receive a detailed product data sheet and supporting documentation, visit the CISP Extranet at
www.onsemi.com/MyON.
Worldwide Sales and Design Support
ON Semiconductor CMOS Image Sensor Business Unit offers standard and customized CMOS image sensors for consumer
as well as industrial and professional applications. Consumer applications include solutions for fast growing high-speed
machine vision, motion monitoring, medical imaging, intelligent traffic systems, security, and barcode applications. Our
customized CMOS image sensors are characterized by very high pixel counts, large area, very high frame rates, large dynamic
range, and high sensitivity.
ON Semiconductor maintains a worldwide network of offices, customer service centers, manufacturer’s representatives and
distributors. For more information on image sensors, contact
imagesensors@onsemi.com.
ON Semiconductor and the
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries.
SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed
at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation
or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets
and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each
customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended,
or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which
the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or
unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim
alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable
copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone:
303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax:
303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email:
orderlit@onsemi.com
N. American Technical Support:
800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
ON Semiconductor Website: www.onsemi.com
Order Literature:
http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
http://onsemi.com
2
PB_NOIP1SN1300A/D
Analogue and Mixed Signal
京公网安备 11010802033920号
EEWORLD
