ET03J1AVPE1 datasheet, PDF - EEWORLD Datasheet

Datasheet> All Categories > Mechanical and electronic products> switch> ET03J1AVPE1

ET03J1AVPE1: DescriptionRocker Switch, SPDT, Latched, 0.02A, 20VDC, Solder Terminal, Rocker Actuator, Through Hole-right Angle, ROHS COMPLIANT; CategoryMechanical and electronic products switch; File Size763KB，7 Pages; ManufacturerITT; Websitehttp://www.ittcannon.com/; Environmental Compliance

Download Datasheet Parametric View All

ET03J1AVPE1 Overview

Rocker Switch, SPDT, Latched, 0.02A, 20VDC, Solder Terminal, Rocker Actuator, Through Hole-right Angle, ROHS COMPLIANT

ET03J1AVPE1 Parametric

Parameter Name	Attribute value
Is it Rohs certified?	conform to
Maker	ITT
package instruction	ROHS COMPLIANT
Reach Compliance Code	unknown
ECCN code	EAR99
Actuator type	ROCKER
body width	5.08 mm
body height	8.13 mm
Body length or diameter	8.15 mm
Contact (AC) maximum rated R load	.02A@20VAC
Maximum contact current (AC)	0.02 A
Maximum contact current (DC)	0.02 A
Contact (DC) maximum rated R load	.02A@20VDC
Maximum contact voltage (AC)	20 V
Maximum contact voltage (DC)	20 V
Electrical life	30000 Cycle(s)
JESD-609 code	e3
Manufacturer's serial number	ET03
Installation features	THROUGH HOLE-RIGHT ANGLE
Maximum operating temperature	85 °C
Minimum operating temperature	-30 °C
seal	EPOXY TERMINAL SEALED
surface mount	NO
Switch action	LATCHED
switch function	SPDT
Switch type	ROCKER SWITCH
Terminal surface	Matte Tin (Sn) - with Nickel (Ni) barrier
Termination type	SOLDER
Base Number Matches	1

Preview

Download Datasheet

View All

C&K ET Series

Sealed Subminiature Rocker Switches

Features/Benefits

•

Sealed against solder and cleaning

process contaminants

•

Rocker, bushing & case—UL 94V-0

•

Small footprint—saves space

Typical Applications

•

Telecommunications

•

Instrumentation

•

Computers & peripherals

•

RoHS compliant

Models Available

Specifications

CONTACT RATING: B contact material: 0.4 VA max. @

20 V AC or DC max. Q contact material: Copper alloy, silver

plated. See page H-44 for additional ratings.

ELECTRICAL LIFE: ETX1 models: 60,000 make-and-break

cycles at full load. All other models: 30,000 cycles.

CONTACT RESISTANCE: Below 20 m

Ω

typ. initial @

2-4 V DC, 100 mA, for both silver and gold plated contacts.

INSULATION RESISTANCE: 109

Ω

min.

DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level.

OPERATING TEMPERATURE: –30ºC to 85ºC.

SOLDERABILITY: Per MIL-STD-202F method 208D, or

EIA RS-186E method 9 (1 hour steam aging).

PACKAGING: Surface mount switches standard in tape and reel

packaging, see page H-46 for drawings and reel information.

Materials

CASE & BUSHING: Glass filled nylon 6/6, flame retardant,

heat stabilized (UL 94V-0). SA and SA1 surface mount: High

temperature material, glass filled 46 nylon, flame retardant,

heat stabilized (UL 94V-0).

ACTUATOR: Nylon, black standard. Internal o-ring seal

standard with all actuators. SA surface mount: High

temperature material, glass filled 46 nylon, flame retardant,

heat stabilized (UL 94V-0).

SWITCH SUPPORT: Brass, matte-tin plated.

CONTACTS & TERMINALS: B contact material: Copper alloy,

with gold plate over nickel plate. Q contact material: Copper alloy,

silver plated. See page H-44 for additional contact materials.

TERMINAL SEAL: Epoxy.

NOTE:

Any models supplied with Q, B, G, S, P & R contact material are RoHS compliant.

For the latest information regarding RoHS compliance, please go to:

www.ittcannon.com/rohs.

NOTE:

Specifications and materials listed above are for switches with standard options.

For information on specific and custom switches, consult Customer Service Center.

Build-A-Switch

To order, simply select desired option from each category and place in the appropriate box. Available options are shown and

described on pages H-41 thru H-46. For additional options not shown in catalog, consult Customer Service Center. All models are

process sealed to withstand machine soldering temperatures and pressure wash cleaning methods.

Switch Function

ET01

SP On-None-On

ET02

SP Off-None-On

ET03

SP On-Off-On

ET05

SP Mom.-Off-Mom.

ET07

SP On-Off-Mom.

ET08

SP On-None-Mom.

ET21

DP On-None-On

ET27

DP On-Off-Mom.

ET28

DP On-None-Mom.

Actuator

Rocker

Terminations

Right angle, PC thru-hole

Vertical Right angle, PC thru-hole

PC Thru-hole

V-bracket

AV2

Vertical Right angle, PC thru-hole

Surface mount

SA1

Right Angle Surface mount

Contact Material

Gold

Gold, tin-lead

Gold, matte tin

Silver

Silver, tin-lead

Silver, matte-tin

Gold over silver

Gold over silver, tin-lead

Gold over silver, matte-tin

Seal

Epoxy

Rocker

Actuator Color

Black

White

Red

H-40

Dimensions are shown: Inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

Recommended Resources

Transistor oscillation circuit for low power transmitter

Double touch point digital code lock circuit

Color TV main power supply overvoltage protection circuit

Practical differential amplifier circuit diagram

Microcomputer telephone cost saver circuit diagram

inverting amplifier circuit

【LoRa】Common Problems in LoRa Development: [b][size=4] [/size][/b] [b][size=4] As the title: Summarizes the common problems in LoRa development and shares them. Welcome to download and exchange :). [/size][/b] [b][size=4] [/size][/b]Common pro...; freeelectron RF/Wirelessly

[Synopsys IP Resources] Using ARC Processor IP to achieve efficient facial detection and recognition: IntroductionFace recognition, the challenge of identifying and verifying faces in photos, is a simple problem for humans but a complex one for computers. After 60 years of research, recent advances in...; arui1999 Integrated technical exchanges

Welcome to discuss: Why are so many people optimistic about gallium nitride (GaN) devices?: [font=微软雅黑][size=4]Gallium nitride and graphene, which were hyped up a few years ago, are surprisingly similar in popularity. They are both new materials that promote the rapid development of related ...; EEWORLD社区 RF/Wirelessly

Has anyone used BL9582B?: The circuit I designed using the BL9582B design manual is as follows: The difference between the picture and the manual is: an optocoupler is added, which may affect the smoothness of the PWM. There s...; bigbat Domestic Chip Exchange

[ST MEMS waterproof pressure sensor LPS27HHW review] + Problems with the routine: [i=s]This post was last edited by jinglixixi on 2021-2-1 00:02[/i]In the previous introduction, the routine was analyzed accordingly and the method of program migration based on the STM32F411 developm...; jinglixixi MEMS sensors

Qinheng CH582mesh networking: I use Qinheng's ch582 chip. I have implemented a network adapter according to the BLE-Mesh networking routine. The two relay nodes are successfully networked, but I want to realize the communication b...; 我要学会它 Domestic Chip Exchange

Shortcut: 00 01 02 03 04 05 06 07 08 09 0A 0C 0F 0J 0L 0M 0R 0S 0T 0Z 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F 1H 1K 1M 1N 1P 1S 1T 1V 1X 1Z 20 21 22 23 24 25 26 27 28 29 2A 2B 2C 2D 2E 2F 2G 2K 2M 2N 2P 2Q 2R 2S 2T 2W 2Z 30 31 32 33 34 35 36 37 38 39 3A 3B 3C 3D 3E 3F 3G 3H 3J 3K 3L 3M 3N 3P 3R 3S 3T 3V 40 41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 4M 4N 4P 4S 4T 50 51 52 53 54 55 56 57 58 59 5A 5B 5C 5E 5G 5H 5K 5M 5N 5P 5S 5T 5V 60 61 62 63 64 65 66 67 68 69 6A 6C 6E 6F 6M 6N 6P 6R 6S 6T 70 71 72 73 74 75 76 77 78 79 7A 7B 7C 7M 7N 7P 7Q 7V 7W 7X 80 81 82 83 84 85 86 87 88 89 8A 8D 8E 8L 8N 8P 8S 8T 8W 8Y 8Z 90 91 92 93 94 95 96 97 98 99 9A 9B 9C 9D 9F 9G 9H 9L 9S 9T 9W

Popular Components