2 mm Type D, 176 Signal Contacts, 8 Rows, Straight
•
•
•
•
•
•
•
•
HSHM Series
Up to 5 Gb/s data rates
Low crosstalk at high frequencies
50/100 Ω (single-ended /differential) impedance
Modular/scalable format IEC 61076-4-101
101 mated lines per linear inch
Four integrated 8.25 A power contacts
Integrated guide pin
End-to-end stackable with 8 row 3M
™
MetPak
™
HM
and HSHM headers
• See the Regulatory Information Appendix (RIA) in
the “RoHS compliance” section of
www.3mconnector.com for compliance information
Date Modified: November 8, 2010
TS-2015-B
Sheet 1 of 3
Physical
Insulation:
Material: High Temperature Thermoplastic (LCP)
Flammability: UL 94V-0
Contact:
Material: Copper Alloy
Plating: See Ordering Information
Performance
Mechanical:
Normal Force (Nominal): 0.57 N [58 g] Signal, 0.74 N [75 g] Shield
Engagement Force (Nominal): 0.32 N [33 g] Signal, 0.22 N [22 g] Shield
Separation Force (Nominal): 0.20 N [20 g] Signal, 0.20 N [20 g] Shield
Wipe (Nominal, Shortest Contact): 2.67 mm [0.105 in] Signal, 1.57 mm [0.062 in] Shield
Mate/Unmate Cycles: 250
Application: This module is suitable for stand-alone use. (Refer to IEC-61076-4-101)
Electrical:
Data Rate: 5 Gb/s
Characteristic Impedance: 50
Ω
Single-ended, 100
Ω
Differential
Current Rating (Fully Loaded): 1 A @ 70° C Signal
Insulation Resistance: 10
4
MΩ @ 100 V
DC
Withstanding Voltage: 750 V
rms
Environmental
Temperature Rating:
-55° C to 125° C
UL File No.: E68080
MetPak is a trademark of 3M Company.
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
3M
™
MetPak
™
HSHM Press-Fit Header
2 mm Type D, 176 Signal Contacts, 8 Rows, Straight
49.85
1.963
Pin positions
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
HSHM Series
2.00
.079
2.00
.079
ROW I
ROW H
ROW G
ROW F
ROW E
ROW D
ROW C
ROW B
ROW A
ROW Z
2.00
.079
2.00
.079
18.00
.709
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
21.40
.843
15.60
.614
Interstitial
ground
contacts
Shield positions
48.00
1.890
denotes shield column (tail only) omitted for the
row differential pair part
5.00
.197
Signal
contacts
1.50
.059
DIM A
13.40
.528
HSHM-HXXXXX-8XPX-XXXXX
REV X
XXYY
4.50
.177
DIM B
DIM C
DIM A = Pin mating length
DIM B = Shield tail length
DIM C = Pin tail length
Coaxial, column differential and stripline configuration
shown with protective caps*
HSHM-HXXXXX-8XPX-XXXXX
REV X
XXYY
mm
(Inch)
Tolerance Unless Noted
mm
0
±3
0.0
±0.3
0.00
±0.13
( ) Dimensions used for
Reference Only
Row differential configuration
shown with protective caps*
* Caps to be removed after press-fit installation process
Ordering Information
HSHM-H176DPWRX-8CPX- XXXXX
High Speed Option:
4 = Coaxial, column differential and
stripline (75
Ω)
applications
5 = Row differential applications
(rows I and Z not loaded)
Plating μm [ μ” ]:
TG30 = 0.76 [30] Min. Au Contact Area
2.54 [100] Min. SnPb Terminal Area (RIA C2 & E2 apply)
1.27 [50] Min. Ni All over
Standard Option
TG30L = 0.76 [30] Min. Au Contact Area, Lubricated
2.54 [100] Min. SnPb Terminal Area (RIA C2 & E2 apply)
1.27 [50] Min. Ni All over
Non-Standard Option (Available with longer lead times and
higher make order quantities, MOQ)
TG50 = 1.27 [50] Min. Au Contact Area, Lubricated
2.54 [100] Min. SnPb Terminal Area (RIA C2 & E2 apply)
1.27 [50] Min. Ni All over
Non-Standard Option (Available with longer lead times and
higher make order quantities, MOQ)
TS-2015-B
Sheet 2 of 3
Tail Length:
1 = 4.4 mm pin and 3.5 mm shield
2 = 2 mm pin and 2 mm shield
Standard Configuration
DIM A = 5.3 mm for rows A through H
For non--standard configurations contact sales representative
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
MetPak
™
HSHM Press-Fit Header
2 mm Type D, 176 Signal Contacts, 8 Rows, Straight
HSHM Series
12.00
1.00
2.00
6.00
2.00
1.00
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
H G F E D C B A
Ø
2.00
+0.05
0
Ø
0.10 A B
4.00
Ø
2.35
+.05
-.03
Ø
0.10 A B
Ø
DIM. D
Ø
0.10
M
A B
4.00
48.00
Plated thru holes
H G F E D C B A
14.00
B
A
Recommended PCB hole mounting pattern for
coaxial, column differential and stripline applications
Recommended PCB hole mounting pattern for row
differential applications
(Same geometry as left view without the ground vias)
Hole Plating Table mm
Finished Hole Dia.
0.457 - 0.559 [.0180 - .0220]
Cu. Thickness
0.025 - 0.045 [.0010 - .0018]
SnPb Thickness
0.008 -0.018 [.0003 - .0007]
Drilled Hole Dia.
0.584 - 0.625 [.0230 - .0246]
TS-2015-B
Sheet 3 of 3
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase.
3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product.
Except
where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of
It is now very popular to use microwaves in microwave ovens to cook food. Since microwave cooking has the advantages of fast heating, energy saving, no pollution to the environment, and good freshness...
[i=s]This post was last edited by Jasse3 on 2019-12-6 16:10[/i]JDI 7-inch screen HDMI to MIPI portable display chassis side transparent secondary screen
The driver board adopts Toshiba solution, with ...
[i=s]This post was last edited by anananjjj on 2019-11-10 21:13[/i]By chance, I was searching for something and found that the content briefly described in the Lichee Pi Zero User Guide (http://zero.l...
This circuit is all you need to amplify 4V to 2500V! The most comprehensive analysis of the internal circuit of an electric mosquito swatter on the Internet~...
5G industrial router is a kind of wireless data transmission function that uses public wireless network to provide users with wireless data transmission. How to choose a good 5G industrial router is n...
Synopsys recently announced the general availability of its Virtual Device Development Kit ( VDK ) supporting NXP's S32G vehicle network processor . VDK has been widely used by NXP teams to develop ...[Details]
Reliable system security requires a combination of approaches, and the root of trust must begin with a secure boot process. Lattice has built on its leadership in this area with the launch of the nex...[Details]
India's antitrust watchdog found in a two-year investigation that Google abused the dominance of its Android operating system in India and used its "strong financial power" to illegally harm competit...[Details]
It is well known that the maximum thermal efficiency of diesel engines is higher than that of gasoline engines, and most of the time the price of diesel is lower than that of gasoline. In this case...[Details]
Rexam Beverage Cans Americas, the world's largest canning company, pays attention to production details. In its plant in Valparaiso, Illinois, aluminum can lids for two-piece beverage cans are careful...[Details]
0 Introduction
In industrial production and daily life, temperature is one of the important parameters that need to be measured and controlled. Many physical phenomena and chemical properties ...[Details]
MAX713 series chips and simple peripheral circuits can be used to design low-cost single-cell or multi-cell NiMH or NiCd battery chargers, which are very suitable for the compact design of portable...[Details]
The VF voltage of LED light sources for lighting is very low, generally VF=2.75-3.8V, IF is 15-1400mA; therefore, the output voltage of LED driver IC is VFXN or VFX1, and the IF constant current is 1...[Details]
ABLIC Inc. (ABLIC) today launched the S-19720 series of automotive voltage trackers.
The S-19720 Series voltage tracker released today features the industry’s lowest (*1) offset voltage,...[Details]
On July 13, Mr. Wu Yongqiang, Chairman of Tuobang Co., Ltd. (hereinafter referred to as "Tuobang"), was invited to attend the Huizhou New Energy Storage Industry Development Promotion Conference. H...[Details]
On September 6, Nikkei Asian Review reported that Viettel Group, Vietnam's largest mobile operator, has decided to exclude Huawei equipment from the company's 5G network construction, citing security...[Details]
There are many flow meters for measuring liquid flow on large-diameter pipes, but the results vary. During the measurement, some of the internal components of the instrument are covered by debris, af...[Details]
Most smart batteries use a microcontroller (MCU). The architecture of the MCU not only affects the performance of the battery itself, but also indirectly affects the battery-powered devices. Therefor...[Details]
Semiconductor IP technology and software provider T2MIP recently announced that its Bluetooth dual-mode V5.2 protocol stack software, profiles and LC3 codec IP have been licensed to a semiconductor c...[Details]
In order to implement the requirements of the "Notice of the General Office of the State Council on Issuing the Implementation Plan of the Extended Producer Responsibility System" (Guobanfa No. 99...[Details]
RF/Wirelessly
京公网安备 11010802033920号
EEWORLD
