NJU7062D

Basic information of NJU7062D amplifier:

NJU7062D is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are DIP, DIP8,.3

NJU7062D amplifier core information:

The minimum operating temperature of NJU7062D is -20 °C and the maximum operating temperature is 75 °C. Its peak reflow temperature is NOT SPECIFIED

How to simply check the efficiency of an amplifier? Looking at its slew rate, the nominal slew rate of NJU7062D is 0.4 V/us. The maximum slew rate of NJU7062D given by the manufacturer is 0.6 mA. Its minimum voltage gain is 10000. When the op amp is used in a closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the NJU7062D gain becomes 0.707 times the low-frequency gain is 400 kHz.

The nominal supply voltage of the NJU7062D is 10 V. The range of its power supply is: 10 V. The input offset voltage of NJU7062D is 2000 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Related dimensions of NJU7062D:

The width of NJU7062D is: 7.62 mm and the length is 8.8 mm. NJU7062D has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 2.54 mm. Total pins: 8

NJU7062D amplifier additional information:

NJU7062D adopts the VOLTAGE-FEEDBACK architecture. It belongs to the low-bias class of amplifiers. It does not belong to the low offset class of amplifiers. The frequency compensation status of NJU7062D is: YES. Its temperature grade is: COMMERCIAL EXTENDED.

It is a micropower amplifier. NJU7062D is not Rohs certified. It does not contain lead. The corresponding JESD-30 code is: R-PDIP-T8. The corresponding JESD-609 code is: e6.

The packaging code of NJU7062D is: DIP. The materials of NJU7062D package are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR. The NJU7062D package pin format is: IN-LINE. Its terminal form is: THROUGH-HOLE.

The maximum seat height is 4.7 mm.