TLC25L2ACPW

Basic information of TLC25L2ACPW amplifier:

TLC25L2ACPW is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are PLASTIC, TSSOP-8

TLC25L2ACPW amplifier core information:

The minimum operating temperature of the TLC25L2ACPW is and the maximum operating temperature is 70 °C. Its peak reflow temperature is NOT SPECIFIED Its maximum bias current at 25°C is: 0.00006 µA Its maximum average bias current is 0.0006 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the TLC25L2ACPW has a nominal slew rate of 0.04 V/us. The maximum slew rate of TLC25L2ACPW given by the manufacturer is 0.066 mA. Its minimum voltage gain is 50000. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the TLC25L2ACPW gain becomes 0.707 times the low-frequency gain is 100000 kHz. The TLC25L2ACPW has NO power. Its programmable power is NO.

The nominal supply voltage of the TLC25L2ACPW is 5 V. The power supply range is: 5/10 V. The input offset voltage of the TLC25L2ACPW is 6500 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Related dimensions of TLC25L2ACPW:

The width of TLC25L2ACPW is: 3 mm and the length is 4.4 mm. TLC25L2ACPW has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 0.65 mm. Total pins: 8

TLC25L2ACPW amplifier additional information:

TLC25L2ACPW adopts the VOLTAGE-FEEDBACK architecture. It belongs to the low-bias class of amplifiers. It does not belong to the low offset class of amplifiers. The frequency compensation status of TLC25L2ACPW is: YES. Its temperature grade is: COMMERCIAL.

It is not a micropower amplifier. The TLC25L2ACPW is not Rohs certified. The corresponding JESD-30 code is: R-PDSO-G8. The packaging code of TLC25L2ACPW is: TSSOP. The materials of TLC25L2ACPW package are mostly PLASTIC/EPOXY.

The package shape is RECTANGULAR. TLC25L2ACPW package pin forms are: SMALL OUTLINE, THIN PROFILE, SHRINK PITCH. Its terminal forms are: GULL WING. The maximum seat height is 1.2 mm.