TLC074AIPWPRG4

TLC074AIPWPRG4 amplifier basic information:

TLC074AIPWPRG4 is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are GREEN, POWER, PLASTIC, TSSOP-20

TLC074AIPWPRG4 amplifier core information:

The TLC074AIPWPRG4 has a minimum operating temperature of -40 °C and a maximum operating temperature of 125 °C. Its peak reflow temperature is NOT SPECIFIED Its maximum bias current at 25°C is: 0.00005 µA Its maximum average bias current is 0.0007 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the TLC074AIPWPRG4 has a nominal slew rate of 16 V/us. The maximum slew rate of the TLC074AIPWPRG4 given by the manufacturer is 14 mA, while the minimum slew rate is 9.5 V/us. Its minimum voltage gain is 100000. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the TLC074AIPWPRG4 gain becomes 0.707 times the low-frequency gain is 10000 kHz. The power of TLC074AIPWPRG4 is NO. Its programmable power is NO.

The nominal supply voltage of TLC074AIPWPRG4 is 5 V, and its corresponding nominal negative supply voltage is. The input offset voltage of TLC074AIPWPRG4 is 2000 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Related dimensions of TLC074AIPWPRG4:

The width of TLC074AIPWPRG4 is: 4.4 mm and the length is 6.5 mm. TLC074AIPWPRG4 has 20 terminals. Its terminal position type is: DUAL. Terminal pitch is 0.65 mm. Total pins: 20

TLC074AIPWPRG4 amplifier additional information:

TLC074AIPWPRG4 adopts the VOLTAGE-FEEDBACK architecture. It belongs to the low-bias class of amplifiers. It does not belong to the low offset class of amplifiers. The frequency compensation status of TLC074AIPWPRG4 is: YES. Its temperature grade is: AUTOMOTIVE.

It is not a micropower amplifier. TLC074AIPWPRG4 is not Rohs certified. The corresponding JESD-30 code is: R-PDSO-G20. The packaging code of TLC074AIPWPRG4 is: TSSOP. The materials of TLC074AIPWPRG4 package are mostly PLASTIC/EPOXY.

The package shape is RECTANGULAR. TLC074AIPWPRG4 package pin formats are: SMALL OUTLINE, THIN PROFILE, SHRINK PITCH. Its terminal forms are: GULL WING. The maximum seat height is 1.2 mm.