I have a question: I am an application developer. I made a serial communication program (VB) using the MSCOMM control. I used the serial debugging program to test that there is no problem with receivi
I want to adjust the ADC10 on the G2 board, so I wrote this program. I input from P1.1, and when the output exceeds a certain value, the P1.0 light goes out.#include "msp430g2231.h"void main(void){WDT
[i=s]This post was last edited by jameswangsynnex on 2015-3-3 19:57[/i] Old things can become popular again, and commercial brands are no exception. For example, instant camera company Polaroid filed
[b]Lecture 15 SerialApp Project[/b][align=left]1. Project Overview[/align] [align=left]SerialApp project is an example of using serial port provided by TI. This project can complete serial port transp
Motorcycle tail flash gravel light circuit When the night running light is turned on, 12V power supply is connected to this circuit. The potentials of the main points in the circuit are set as follows