One of the electromagnetic vibration table circuits
Source: InternetPublisher:黄土马家 Keywords: Vibration table electromagnetic vibration short circuit Updated: 2020/04/10
The electromagnetic vibrating table or feeder is
a feeding device that utilizes the phenomenon that small objects can "freely line up" to move along the track or barrel after being forced to vibrate in a certain track or barrel. The source of vibration is an electric
iron without a short circuit ring .
Figure 6-38 is the simplest electric vibrating feeder, which uses the opening and closing of the AC contactor contacts without the short-circuit ring to vibrate the iron core
. Adjust the rheostat RP so that the vibration frequency of the armature is consistent with the natural frequency and oscillation occurs.
- The meaning and importance of circuit protection, common types of circuit protection
- How to Make a Hot Tub Smart and Remotely Operated with a Raspberry Pi
- What is a RADAX motor?
- Replace the GE LOGIQ a200 ultrasound measurement key with a self-made touch switch
- Working principle of one Xipu STR soft starter controlling two motors
- Squirrel cage asynchronous motor reverse braking control circuit
- Add one more component to improve the phase failure protection function
- IGBT modules block overcurrent by controlling the gate
- Design and analysis of voice control circuit
- Precious home appliance anti-theft alarm
- Photoelectric tracking control circuit
- DC voltage stabilizing circuit and zero-crossing detection circuit in the indoor unit control circuit of Hisense KFR-25GW-06BP inverter air conditioner
- Multi-pole leakage protector circuit b
- CPU input and output and memory control circuit
- Photoelectric output control circuit
- Relay control circuitb
- Range hood detection control circuit
- Water dispenser (Aucma) temperature detection control circuit
- Temperature detection control circuit of electric hot water bottle
- audio signal control circuit