Range hood detection control circuit
Source: InternetPublisher:aytwartoofyoroo Keywords: Range hood control circuit Updated: 2021/10/27
Range hood detection control circuit
Shown is a range hood detection and control circuit . The main component in this circuit is the gas sensor MQ-211. When the gas
sensor detects oil fume gas. A DC voltage will be generated at point B. This voltage is added to the @ pin of Icl, causing the IC1 ③ and ⑦ pins to output control signals . The drive signal
of the @ pin causes the relay K to act and drives the motor to pump air. The signal of the ⑦ pin causes the oscillation When the alarm is activated, the buzzer will
sound and the LED will light up to indicate.
- Frequency divider that converts 50Hz or 60Hz frequency into 1/60 frequency (CD4040)
- NE5532 standard linear preamplifier IC circuit features and application schematics
- Odd-frequency counter with symmetrical output waveform (SN7474, SN74163)
- Method for obtaining second reference signal using CMOS pointer-type quartz electronic clock integrated circuit
- UHF amplifier circuit
- VCA2613 LNP circuit with compensation capacitor
- Class A2 single-ended parallel amplifier circuit
- FET buffer amplifier with high input impedance using INA103
- Working Principle and Application of Shaded-Shaped Inverter Circuit
- Temperature Compensated Logarithmic Response Feedback Amplifier Circuit (VCA610/OPA620)
- Simple timing control circuit
- Stapler control circuit
- Three-phase stepper motor control circuit
- CPU input and output and memory control circuit
- Typical operation display circuit
- Automatic door detection control circuit
- Electric heater temperature detection control circuit
- Little Swan Fangtai type range hood circuit diagram
- Little Swan CXW-180-99A two-wheel type range hood circuit diagram
- Aoda YB5-4C luxury ultra-thin double-duct range hood circuit diagram