High voltage generator excitation group overvoltage protection circuit
Source: InternetPublisher:公子李 Keywords: Protection circuit excitation generator high voltage Updated: 2020/04/25
The DC voltage of the generator excitation winding
is provided by a three-phase thyristor after rectification. In the case of incorrect synchronization, out-of-synchronization, system failure, etc. ,
overvoltage
will be caused on the DC side that is harmful to the insulation of the rectifier components and excitation windings. To this end, the overvoltage must be limited, and the protection
shown in Figure 13-90 is usually used. circuit . In the figure, BQ is the excitation winding.
The varistor R serves as a backup overvoltage protection component.
- Experiment on realizing photoelectric alarm using photosensitive devices
- Audio level LED and digital dual display circuit
- Design and production of digital number answering machine
- Electronic massage and acupuncture device circuit
- SC3071 touch step dimming light circuit
- Lighting audio control circuit
- Large light emitting diode display circuit
- Gas and smoke alarm circuits with intermittent alarms
- Digital display multi-function thermometer circuit
- Fluorescent dimming circuit (1)
- Capacitive Neutral Leakage Protection Circuit
- Leakage current protection circuit
- Relay fixed time overcurrent protection circuit a
- Transformer gas protection circuit
- Thyristor silicon stack protection circuitb
- Power overload detection box protection circuit
- Thyristor overcurrent protection circuit one a
- Mains undervoltage and overvoltage protection circuit 4
- Small hydropower station motor speed regulation and overrun protection circuit
- Water resistor anti-speed protection circuit