Water heater electronic ignition circuit
Source: InternetPublisher:风向西瓜 Keywords: water heater ignition circuit switch Updated: 2021/05/29
Shown is the water heater electronic ignition circuit . When the faucet is opened, switch K turns on the 3V battery. Since C2 takes time to charge, VT6 is in a cut-off state. The power supply charges C3 at the same time. The charging turns on VT7 and VT8, which
activates
the gas supply (gas) solenoid valve BK.
The winding is energized, the gas valve is opened, and gas supply begins.
- Car ice warning circuit sharing
- How to remotely control devices using ESP8266 and LPC2148
- How can we make the robot move precisely on a predefined path?
- What are the challenges in designing a permanent magnet linear generator?
- Introduction to the internal structure of the Delta winding motor
- How to set up a cheap beam break sensor control distance scene using a reflector
- Controlling stepper motors with wireless remote control transceiver and PE-51 board
- Starting method of asynchronous motor with external frequency-sensitive resistor
- Guanghua brand anti-theft doorbell electronic lock circuit
- Homemade short circuit alarm device
- Rural vegetable greenhouse lighting circuit
- Paper thickness detection circuit
- On and off states generate fixed-width pulse circuit
- 1-O connection diagram of PLC
- Transistor leakage release protection circuit
- Object detection alarm circuit with locking function
- Switching pulse shaping circuit
- Anti-shake circuit for operating switch
- Non-polar battery charging circuit three
- Apply LOGO! altar washing machine control circuit a